Organizer
Gadget news
Dali Rubikore 2 review: excellent value for money in these big-sound, small-size stereo speakers
5:30 pm | November 10, 2024

Author: admin | Category: Audio Computers Gadgets Hi-Fi Speakers | Comments: Off

Dali Rubikore 2: Two-minute review

A longstanding concept in hi-fi (and indeed many other product categories) is that of ‘trickle down.’ The idea is simple enough; technology and design ideas that first appear in the flagship products is gradually made available at more terrestrial levels as time goes on. It’s a very important dynamic because, while many people will move upward through a product range as time goes on, rather fewer of them will make it all the way to the top. Bringing flagship technology down to a level more people can access is very important – and many of the best stereo speakers we've tested have been able to do just that. 

The Dali Rubikore range is a physical manifestation of the trickle down concept, indeed the ideal is so important to the their existence it is reflected in the name. The replacement for the long running and highly regarded Rubikon series of speakers and some of the advancements are derived from the Kore (stylised to 'KORE') technology that first saw use in the Kore floorstander which is yours for a brisk $110,000 / £85,000. The resulting speakers have their name revised to reflect this and are now the Rubikore range of which the Rubikore 2 is the only standmount model. 

The Rubikore 2 pitches in at $4,000 or a little over £2,000; a key price point for standmount speakers and one which is contested by a very large number of companies. To stand out from the pack, the Dali will need to be very good indeed. The omens are good; The Kore technology is used to improve some already very capable drivers, the claimed measurements look excellent and the range has some up to date thinking in terms of multichannel as well as having some very attractive finishes. Does this on paper ability translate to real world greatness? 

Dali Rubikore 2 review: Price and release date

The DALI Rubikore 2 speaker next to a record player and a wooden surface.

(Image credit: Future)
  • Launched in May 2024
  • £2,200/$4,000/$4,200 AUD

The Rubikore range debuted in May 2024 with the wraps being taken off at the High End Show in Munich. The range comprises a pair of floortanding models, the standmount seen here, an LCR (a speaker engineered to be both a centre speaker and also operate as a stereo pair) and an on wall speaker. This range spans from £1,200 for the Rubikore On Wall to £6,000 for the Epikore 8. This is a fair amount of money but rather less than what Dali is asking for the Kore. 

The Rubikore 2 is available in the UK for £2,200. It is $4,000 in the USA and $4,200 in Australia. This price does not include a stand and neither does Dali make a dedicated version for the Rubikore 2. In a large number of the stock images, you’ll see the Rubikore 2 sat on stout bits of furniture which will work up to a point but you should budget for a pair of stands to get the best from them. I used a hefty if cosmetically unspectacular Custom Design stands throughout for testing. One positive attribute is that all four finishes have the same price, with none commanding a price premium.

Dali Rubikore 2 review: Specs

Dali Rubikore 2 review: Features

A close-up of the rear of the DALI Rubikore 2 speaker in white.

(Image credit: Future)
  • Kore Technology 
  • Clarity Cone Midbass driver 
  • Continuous flare bass port 
  • Lightweight dome tweeter 

As a passive speaker, the Dali is not as sophisticated as powered and active designs but, given it’s a relatively small speaker made out of fairly well established materials, there is a surprising amount going on inside them. Dali has used the enormous amount of data gained the development of the Kore speaker to improve the Rubikore models. Obviously, there are many parts of a $110,000 speaker that don’t make it down to this level, but a number of ideas do.

This is most apparent in the drivers. The Rubikore 2 uses a 6.5inch (155mm) mid bass driver that employs technology that Dali refers to as Clarity Cone. The cone itself is made from Dali's preferred wood fiber; something that have been doing for a very long time but here you can see a pattern on the cone itself. This increases the stiffness of the cone as a whole and improves the breakup behaviour. Behind the driver, Dali's Soft Magnetic Compound is used as it reduces eddy currents and other unwanted effects, lowering distortion overall. 

This driver is helped by a rear firing bass port that employs a continuous flare along its length (that is to say it isn’t the same diameter along its length). This helps to keep the flow of air out of the port quieter as the diameter increases as the air accelerates allowing it to expand. This port helps the Rubikore 2 to reach down to 50Hz at a +/-3dB measurement – a usefully demanding way of measuring this.   

This mid bass driver is partnered with a soft dome tweeter that is built around the principles of reducing mass; a very desirable attribute in a high frequency driver. Traditionally, tweeters used a substance called ferrofluid to cool them but this adds mass and increases the response time. The Rubikore 2’s 1.2 inch (29mm) dome does without this to reduce the mass. The Rubikore 2 is the only member of the Rubikore family to not partner the dome tweeter with a ribbon device although given that the quoted upper frequency roll off is 26kHz (or, quite a bit higher than human hearing actually goes), this is unlikely to be a huge issue. 

The crossover for the two drivers hands over between them at 2.8kHz (relatively high by the standards of many rivals) and is quite unusual in 2024 terms because it supports biwring should you wish. Sensitivity is in keeping with most things at the price at 87dB/w but this is achieved at a slightly trickier 4 ohm impedance which means this isn’t a truly difficult speaker to drive but needs a little power to do its best work. The cabinet that houses everything is a relatively conventional type made of MDF sections; although something that is quite unusual is that both the front and rear panels have a gentle curve to them. The cabinets are extensively braced and substantial things though and the whole speaker feels usefully solid. 

  • Features score: 4/5

Dali Rubikore 2 review: Sound quality

A close-up of the DALI Rubikore 2 speaker in white

(Image credit: Future)
  • Excellent bass 
  • Tonally superb
  • Some limits to soundstage and quiet running 
  • Consistently good fun 

Placed on stands with absolutely no toe in applied (Dali is adamant that its speakers should point dead ahead), the Rubikore 2 doesn’t need vary long to start to impress. The first and most immediately noticeable aspect of the performance is the bass extension and the scale that goes with it. The Dali gives Ben Howard’s Every Kingdom a weight and authority that makes the performance utterly convincing. This album is not a bass monster but plucked bass notes and the sparse percussion it possesses are given a weight you feel as well as hear and the effect this has on the believability of the track is considerable. 

Tonally, the Rubikore 2 is a class act. Across standard challenges like voices, violins, cellos and pianos, it has managed to sound consistently right. This is not a showy or attention grabbing speaker. It doesn’t go in for the sort of emphasis on parts of the frequency response that is superficially impressive but that becomes wearying after a while. Instead it presents a frequency response that feels even and consistent and allows the music to generate its own emphasis. The astonishing Emily King track Forgiveness on her Scenery album is presented with King being the absolute focus of your attention. Everything else that should there is there but it’s subsumed by what the recording regards as the important part and the Dali following those instructions perfectly. 

Something else that is very welcome is that the when the quality of the material being played drops, the Dali still maintains a level of realism and overall quality that is extremely impressive. A blast through Greta van Fleet’s Anthem of a Peaceful Army delivers a healthy dose of the ‘I can’t believe it’s not Led Zeppelin’ sound without drawing too much attention to the limitations of the mastering as a whole. Instead the Rubikore does a fine job of making things sound usefully exciting and energetic, with a very pleasing level of get up and go to its overall performance. 

So far so good, but there are some areas where the Rubikore 2 is less effortlessly composed. It had the misfortune of following Tannoy’s odd but immensely talented Autograph Mini through testing and while it convincingly beats the Tannoy in terms of bass extension, it simply doesn’t create the same almost three dimensional soundstage of the material being played. Some of this is a bit of a puzzle because viewed objectively, the Dali isn’t doing anything wrong. The handover between the mid bass and tweeter is seamless and there is no real perception of congestion to the sound, even when very complex material is being played. Nevertheless, the Dali tends to produce a sound that sits between the two speakers rather than extends beyond it. 

There is also an element of the Dali's performance that might be a benefit or a negative depending on your listening situation. For what is a relatively compact device, the Rubikore 2 is capable of playing impressively loud and sounding effortless while it does so. Even rivals that boast a similar driver complement can struggle to match the way that the Dali handles the huge crescendo of Public Service Broadcasting’s Broadcasting House. Without sounding strained or pushing the limits of the cabinet, the Dali simply keeps hitting hard and sounding utterly composed while it does so. The caveat to this is that at lower levels, the Rubikore 2 sounds a bit on the safe side. If you don’t have the scope to open the taps every now and again, some of the abilities of the Dali will be less easy to enjoy. 

When you do give them a bit of level though, the Dali is consistently good fun. This isn’t simply fun in the ‘play fast music and nod your head’ ideal but an ability to get to the crux of the emotional content of the material being played. It’s the difference between listening to My Baby’s Tribulations and thinking, ‘that’s a nice song’ and sitting there rapt at one of the most stunning vocal arrangements I’ve had the pleasure of listening to.  

  • Sound quality score: 4.5/5

Dali Rubikore 2 review: Design

The DALI Rubikore 2 speaker in white from a high angle next to a wooden surface.

(Image credit: Future)
  • Four finish options 
  • 350 x 195 x 335 mm
  • 9.5kg each 

Dali is a Danish brand and while I’m not sure that some sort of official document exists to the effect that no Danish brand is allowed to make unattractive equipment, it does seem to be a rule they all work to. The Rubikore 2 is elegantly proportioned, with a pleasing ratio to the width and depth that is balanced by the size of the drivers contained within it. There are four finish options, including two wood veneers that have been chosen to complement both the proportions and the drivers very well. Even the white of the review samples; a finish I’m not traditionally enthused about, looks good against the contrast provided by various sections of the speakers. 

This effect is enhanced by just how well made and finished the Dali is. These aren’t cheap speakers but even so, the care that has gone into how they have been assembled and finished is impressive. About the only thing I can really say against them is that, where the vast majority of rivals use magnetic tabs for the grilles, the Dali still uses lugs. They’ve cleverly used screw fittings to hide some of the holes but there is still a visible one above the tweeter which looks a little unsightly. 

  • Design score: 4.5/5

Dali Rubikore 2 review: Value

As noted a few times so far, $4,000 is not the sort of figure that most of us lose down the back of the couch, but it’s hard to argue with the feel or quality of the Rubikore 2 for this money. This is a brilliantly made and finished speaker that is built in Europe and comes with a five year warranty. It does a fine job of avoiding the nagging feeling of buyer’s remorse when you unbox them which is no bad thing. They will require decent quality equipment to partner them but not to the extent where they won’t improve an existing system of slightly less expensive electronics, so long as there is sufficient power to drive them. 

  • Value score: 4.5/5

Should you buy the Dali Rubikore 2?

Buy them if...

Tonality matters 

The Dali does a brilliant job of bringing voices and instruments to life. Even very talented rivals at this price can struggle to match their abilities in this regard. 

You like a bit of bass

Without ever sounding boomy or lacking in control, the Dali Rubikore 2 has tremendous low end for a sensibly size speaker. Very few rivals can hit as hard while matching the dexterity of the Rubikore 2.

Aesthetics are important to you

This is a good looking speaker that comes in four well judged finishes, none of which command a price premium. There a very few spaces where at least one of these options won’t look good and work well.

Don't buy them if...

You listen quietly 

At lower levels, the Rubikore 2 isn’t a bad speaker pair, but some of the attributes it shows at higher volumes are less apparent. 

Soundstage is everything 

The Dali never sounds congested or confused, but some rivals do a better job of extending their performance out beyond the speakers. 

You have a very low powered amp 

It would be a stretch to call the Dali truly insensitive but it will do its best work with a little bit of power and current behind it. If you have less than 40 watts on hand, this probably isn’t the best choice for you. 

Dali Rubikore 2 review: Also consider

The curious but lovely Tannoy Autograph Mini is the same price as the Dali. The product under review here completely demolished it in terms of bass extension and scale, but the stereo image it can produce is something that the Dali cannot match. The Monitor Audio Studio 89 is slightly less money but comes laden with technology and striking looks as well as an ability to resolve fine detail that very little near the price gets anywhere near. Outside of speakers we have looked at, Bowers & Wilkins, Neat and PMC are all formidable contenders at this price point and will keep the Dali honest. 

How I tested the Dali Rubikore 2

A close-up of the DALI Rubikore 2 speaker in white

(Image credit: Future)

The Dalis were placed on a pair of Custom Design stands and run in a system built around a Naim Supernait 3 integrated amp; a slightly more expensive device than the Dali but able to deliver plenty of power and show what the Rubikore 2 was doing at any given time. 

Source equipment took the form of an Eversolo DMP-A8 streamer. This formidable digital front end offers superb UPnP streaming but also has an HDMI ARC connection allowing an LG OLED to be connected and routed through the system to the Dali. I tend to use the Eversolo via the Roon software platform because I control most things through that and tend to prefer it. 

I also made use of not one but two turntables under testing. The first is a resident Rega Planar 10 using the company’s newly released Nd7 moving magnet cartridge. The second was the newly released Pro-Ject Debut Evo 2 for which the Dali acted as a test speaker. Both turntables used a Cyrus Classic Phono for the phono stage. Material used has been a variety of styles and genres via The test material has been FLAC, AIFF, Tidal, Qobuz and Spotify as well as some vinyl. 

iPhone 16 Pro vs. iPhone 15 Pro
5:01 pm |

Author: admin | Category: Mobile phones news | Comments: Off

The 2024 generation of Pro iPhones brings mostly minor changes - refinement and fine-tuning. That includes an even wider range of camera capabilities, a new button (possibly in the camera category, but also kind of its own thing), design tweaks, a tiny bit larger display, a small battery capacity increase. But the 16 Pro in particular can almost claim to have introduced a more principal hardware upgrade - the 5x telephoto camera of the Maxes replaces the 3x unit of the 15 Pro. So if you had to choose now, should you be getting the new 16 Pro, or maybe save a buck and track down the last...

Thrustmaster T.Flight Hotas One review: a great beginner’s flight stick
4:00 pm |

Author: admin | Category: Computers Gadgets Gaming | Tags: , | Comments: Off

Thrustmaster T.Flight Hotas One: One-minute review

Can you believe the Thrustmaster T.Flight Hotas One has been around for years? The entry-level stick offers everything you need to get started in Microsoft Flight Simulator or something more exotic, with a throttle, a comfortable stick, and the option to attach each or keep them separate.

The entire unit is cheaper than many flight sticks you can pick up without an additional throttle, meaning you’re getting plenty of bulk for your buck, if not bang. The throttle is lacking in resistance, and the casing of both halves is made of a relatively cheap-feeling plastic. Thankfully that does make it lightweight, meaning it’s easy to haul between desk and sofa setups across PC and Xbox.

Still, 14 buttons and 5 axes are more than enough for you to earn your pilot wings, and more intermediate features like a tactile hat switch and a nice, springy trigger make it feel much more comprehensive than rivals at this price point.

PlayStation gamers will also need to look elsewhere, but the Hotas One will work on PC and current generation Xbox consoles and will go as far back as the Xbox One. If you’ve got one of those platforms, the plug-and-play nature makes it easy to get started, and the Xbox buttons replicated across the unit can make it easy to make the jump for traditionally console-bound flyers.

All of this makes it an attractive entry-level flight stick that lacks additional axes and controls but offers a more cockpit-adjacent split throttle and stick form factor that it’s easy to feel impressed by. It’s not getting any younger, but with Thrustmaster continuing to re-release it in fresh colorways (including a Microsoft Flight Simulator option), it’s clear the company is standing by it as a first taste of flight stick for beginners.

The Thrustmaster T.Flight Hotas One flight stick on a desk

(Image credit: Future/Lloyd Coombes)

Thrustmaster T.Flight Hotas One: Price and availability

  • List price: $99.99 / £89.99
  • Available in black and Microsoft Flight Simulator options
  • Launched in October 2017

The T-Flight Hotas One has been around for a while (there was a PS3 version at one point, which should tell you how long it’s lasted), and this particular model has been getting PC and Xbox gamers in the air since 2017.

It’s getting harder to find the plain black version now, but the Microsoft Flight Simulator version is the same product with a white finish, suggesting the stick isn’t going anywhere. That new color option is a lot brighter and makes the stick look more modern.

Regardless, you’ll find either for under $100 with discounts, making it more than competitive with some throttle-less options like the Turtle Beach VelocityOne. It’s drastically cheaper than mid-range options like Logitech’s X56 Hotas RGB, too, and it remains a great starter option because of its price.

Thrustmaster T.Flight Hotas One: Specs

Thrustmaster T.Flight Hotas One: Design and features

  • Ideal for desk usage
  • Plastic feels cheap
  • Can collect dust on the throttle base

The Thrustmaster T.Flight Hotas One was the first official flight stick released for the Xbox One (a console that launched in 2013), so it’s had some longevity. Still, its design feels very much of its time - it’s relatively sleek in all black, with some silver accenting and a striped F2 button on the stick.

Still, it’s very plasticky, which can lead to it audibly creaking during use - thank goodness it’s not a real plane! On the one hand that’s likely kept the price down, but on the other, it feels far from premium in comparison to more expensive sticks like Thrustmaster’s own T.16000M FCS Flight Pack.

While buttons can be remapped in your game of choice within their individual settings since the stick is a ‘generic’ option, I’m pleased to see the Xbox buttons represented here. So many flight sticks cater to PC almost exclusively that it’s nice to see the face buttons here, in color, for easier recognition. There’s even the Xbox button to call up the Xbox menu on PC or console.

The rubber under the stick helps prevent dust from getting into the mechanism, but the same can’t be said of the throttle which has no shielding from dust or the elements underneath - if you’re using it regularly that won’t be a problem, but it’s definitely worth mentioning that it’s likely to collect dust.

The stick plugs in via USB-A, with a breakaway cable that’s ideal in case someone yanks the cable while you’re playing. It calls to mind the original Xbox’s cables, and you’ll be thankful for it if it stops your console or PC from toppling.

The Thrustmaster T.Flight Hotas One flight stick on a desk

(Image credit: Future/Lloyd Coombes)

Thrustmaster T.Flight Hotas One: Performance

  • Plug and play on console and PC via USB-A
  • Splitting sections is easy, although cable management can get fiddly
  • Hat switch is a nice touch

Setting up the T.Flight Hotas One couldn’t be simpler - just plug it in via USB-A. While the industry is moving away from it, it lives on here, so bear in mind you may need a USB-C adapter depending on your port selection.

Once it’s plugged in, it just works, both on console and PC. I enjoyed Elite Dangerous on each, and was barrel-rolling and nosediving with reckless abandon within minutes either at my desk or on the couch. The stick is responsive, and the Z-axis rudder can be used via the rocker on the throttle which I found to offer more granular control when listing left or right.

One of my favorite parts is the hat switch, which comes in a four-way version here. This nifty input on the top of the flight stick can act as a D-Pad, letting you do things like open the landing gear in Elite Dangerous with a press. It’ll be hard to go back to mouse and keyboard or controller, that’s for sure, but naturally eight-way hat switches will double the available commands that are a thumb flick away.

It’s easy to take the stick and throttle apart, but the two are connected by a cable. Once you put them back together, you’ll likely want to run the wire underneath through a trench on the underside, and that can be fiddly in my experience.

The Thrustmaster T.Flight Hotas One flight stick on a desk

(Image credit: Future/Lloyd Coombes)

The relatively low price of admission can also be felt in the throttle. It’s not bad, it’s just lacking any resistance which makes it feel less like a piece of aerospace equipment and more like a toy. It’s hard to escape the feeling that this is where corners were cut, and when pushing to hyperspace in a space sim like Elite Dangerous, it feels lacking in any meaningly pushback. It makes sense at this price point but it’s worth mentioning.

On the flip side, I will say the trigger on the stick feels nice and snappy, springing back into place in a way that feels nice and tactile while also ensuring you can line up those laser cannon blasts in something like Star Wars: Squadrons and have the trigger ready to fire again almost instantly.

I’m also pleased to report the T.Flight Hotas One is great for Microsoft Flight Simulator, which might be to be expected with its officially branded version. The split design means you can position a keyboard in the middle of the throttle and flight stick which then allows for a much broader array of commands than the T.Flight Hotas One is able to provide because of its lower button count.

As I mentioned earlier, though, the plastic construction can cause the stick to creak a little, and it’s lightweight enough that it’s not too difficult to accidentally shift it about the desk with relatively minor effort.

Should I buy the Thrustmaster T.Flight Hotas One?

Buy it if...

You want to try a flight stick without spending too much money
What’s on offer here is great value, with a detachable throttle setup that similarly priced rivals simply can’t match.

You’re planning to play across PC and console
This helps save you from buying two sticks, so long as you’re on Xbox. PS5 players will need to look elsewhere. Still, its split sections make it ideal for couch and desk use.

Don't buy it if...

You want a stick geared more for experienced pilots
There are better, more premium sticks for anyone looking for something more extensive.

Also consider...

Still not sold on the T.Flight Hotas One? Here’s how it compares to two similar products.

Turtle Beach VelocityOne

The Turtle Beach VelocityOne is priced very closely to the T.Flight Hotas One but is just a stick with no additional throttle. Offering more buttons, the VelocityOne features an improved hat switch and a more premium feel but comes at the cost of a full-sized throttle. It does offer some satisfying resistance, however, and a nifty OLED display, and will also work on both PC and Xbox.

For more information, check out our full Turtle Beach VelocityOne review.View Deal

Thrustmaster Viper TQS Mission Pack

This Thrustmaster effort looks like it’s been ripped straight from a fighter jet. It’s incredibly premium-feeling, with a whole host of buttons and switches, but it does require a joystick, too - making it a pricey option. We’ll have a full review in the coming days, but if you’re looking for mechanical switches and a true-to-life throttle, you’ll struggle to find anything more realistic.

How I tested the Thrustmaster T.Flight Hotas One

  • Tested over the course of two weeks
  • Used both in split and singular unit modes
  • Tested on multiple games across two platforms

I spent around 15 hours playing Elite Dangerous and Star Wars: Squadrons, both on PC and via an Xbox Series X.

I played each game for several hours, before switching platforms and switching back again to ensure consistent performance across games and platforms.

I also played Microsoft Flight Simulator on PC for a further five hours, splitting the Hotas One and using it as one unit to test its comfort in both configurations.

Read more about how we test 

First reviewed November 2024

T3 SinglePass Smooth X straightener review
4:00 pm |

Author: admin | Category: Computers Gadgets Hair Care Home Small Appliances | Tags: | Comments: Off

T3 SinglePass X: two-minute review

Product info

Note: The SinglePass Smooth X is not to be confused with the SinglePass X. The latter has wider, 1.5in / 38mm plates better best suited for thicker hair and has five temperature settings compared to the Smooth X’s nine. Due to these larger plates, the SinglePass X is less compact than the Smooth X, but still features the same SinglePass technology and CeraGloss plates.

The T3 SinglePass Smooth X may not be at the top of my best hair straighteners list, but when you factor in its design, functionality, tech and value for money, it's not far off. I love its Satin Blush color, and the sleek, pastel pink finish isn't just stylish but practical, as it resists fingerprints and smudges. The rose-gold accents on the hinge and logo add a touch of luxury, while the color of the ceramic plates blends well with the blush tone, giving it a cohesive, high-end feel.

The plates are 1in wide and 20% longer than standard straighteners, which allows for faster styling by covering more hair in each pass. This is a bonus for my long, thin hair and it took a little over two minutes to finish straightening my whole head. Made from T3's CeraGloss ceramic, these plates also help to smooth frizz and add shine and while they might not glide as effortlessly as other straighteners, like the GHD Chronos, (learn more in my GHD Chronos review) they still perform well, especially when curling. The StyleEdge design of these plates, which give them beveled edges, also makes sure curls and waves are created without leaving creases, which is welcomed.

Measuring 11.8in / 30cm long and weighing 14.7oz / 417g, the SinglePass Smooth X is compact, lightweight and well-balanced. I was initially concerned the added length might make it cumbersome, but it was easy to move around my head during styling. The PrecisionControl hinge keeps the plates gliding smoothly without the need for excessive pressure, too, which adds to the overall comfort.

The temperature controls are located near the base of the styler, with a row of nine LED indicators representing its nine heat settings – from 260F / 127C to 410F / 210C. This range gives flexibility for a host of hair types, with lower settings ideal for fine and fragile hair and higher settings best suited for thicker, coarser textures. The SinglePass technology and CeraSync heaters inside the styler then help distribute this heat evenly, reducing the need to go over the same section multiple times and helping to minimize heat damage. This also helps create more uniform curls that last.

During my tests, the SinglePass Smooth X lived up to its name, straightening my fine, naturally curly hair with minimal frizz. However, after straightening, I found my hair looked a little too sleek and flat, which is common for finer hair like mine but was a tad disappointing.

Overall, the T3 SinglePass Smooth X holds its own among the best hair straighteners, with its sleek design, ease of use, and strong performance for both straightening and curling. Minor drawbacks like the placement of the power button, which makes it easy to accidentally change the heat setting, plus the overly sleek results for my thinner hair weren't dealbreakers for me, but did lessen the appeal. However, if you prefer a straight, smooth, frizz-free finish or your hair is long and thick, then chances are you will love it.

Read on for my full T3 SinglePass X review...

T3 SinglePass Smooth X review: price & availability

  • List price: $149.99
  • Available: US only
  • Replaces the T3 Lucea 1" flat iron

The T3 SinglePass Smooth X replaces the Lucea 1in flat iron and costs $149.99. It's only available in the US, and is only sold in a single Satin Blush color.

Its price and technology positions the SinglePass Smooth X in the mid-range of T3's wider straightener lineup. It sits below the $249.99 Smooth ID styler, which has the added feature of real-time personalized heat settings, and the $189.99 Lucea 1.5in styling iron, which has wider plates.

It then costs more, and offers more, in terms of tech and performance than the travel-friendly SinglePass Compact Flat Iron, which retails for $89.99 and has a smaller, more portable design.

The closest model to the Smooth X is the T3 SinglePass Stylemax. It has the same plate size, same SinglePass, CeraGloss and StyleEdge technology and design, and costs the same. Yet it offers more customizable temperature options, and a Curl Mode, which optimizes the heat for curls and waves.

Outside of T3, similar rivals in terms of features and design include the $160 Moroccanoil Perfectly Polished Titanium flat iron, and the £109 mdlondon Strait which has similarly long, bevelled plates and multiple heat settings but is only sold in the UK and ROI.

In comparison to most of its siblings, and rivals, the Smooth X's price – which initially felt high – represents much better value than may first appear. Largely because of its built-in tech, and design as well as its performance. You get more features with the SinglePass Stylemax for the same price, but that model is less attractive, less sleek and doesn't have the longer plates, which are a bonus on the Smooth X.

You can buy the SinglePass Smooth X in the US directly from the T3 website, as well as third party retailers like Amazon US.

  • Value score: 4 out of 5

T3 SinglePass Smooth X specs

T3 SinglePass Smooth X review: design

  • 1-inch wide, ceramic-coated plates
  • 9 different heat settings
  • Longer-than-usual plates

T3 is renowned for making attractive and elegant stylers and the SinglePass Smooth X is no exception. It comes in a single, pastel pink-rose color, officially called Satin Blush, and has a soft, matte finish.

This not only looks and feels premium, but means it doesn't pick up fingerprints or show up grease like black stylers tend to do. Even the plates match the main blush color, and there are rose gold metal accents on the hinge, logo and controls.

T3 SinglePass Smooth X flat irons, photographed side-on, on reviewer's marble dressing table

(Image credit: Future)

The plates are noticeably longer – 20% longer than standard – than other straighteners I've used, including the GHD Platinum Plus, but are on par with plates on the mdlondon STRAIT. They're made from what the brand calls CeraGloss ceramic, which is ceramic material coated in a gloss-like finish.

This is the default for plates across the T3 straightener range and has been designed to smooth frizz and add shine without snagging or pulling the hair. In my experience, this works well and while it's not the smoothest flat iron I've tried (that prize goes to the GHD Chronos) it does a great job.

These plates also use a so-called StyleEdge design. This means their edges are beveled and smooth making them great for creating curls and waves without causing creases or kinks.

Close up of ceramic straightening plate on T3 SinglePass Smooth X flat iron

(Image credit: Future)

In terms of size, the plates are one inch wide and the overall dimensions of the straightener is ‎11.8 x 1.2 x 3.6 in / 30 x 3 x 9.1 cm in size. It weighs 14.7 oz / 417g. This makes it compact and light enough for easy handling and for packing in a suitcase or bag, without being too small to work on longer hair.

I found the straightener to be well-balanced. I was initially concerned that the added length would cause my wrist to ache or be slightly cumbersome while moving it around my head, but this wasn't the case. It isn’t too heavy, but it has enough weight to feel sturdy and comfortable.

The PrecisionControl hinge keeps the arm tension just right, allowing for a smooth, even glide without any stiffness or looseness. You don't have to squeeze too hard to get the best results, nor do the plates aggressively spring back into position. This all adds to the premium feel.

The Power button on the Smooth X doubles up as a temperature control and is found near the base of the styler near the 360-degree, 9ft / 2.7 meter swivel cord. Above this button is a slim row of nine LEDs, each one representing a different temperature setting as follows:

  1. 260F / 127C
  2. 280F / 138C
  3. 300F / 149C
  4. 320F / 160C
  5. 340F / 171C
  6. 360F / 182C
  7. 380F / 193C
  8. 400F / 204C
  9. 410F / 210C

The lower settings (1-4) are designed for fine or fragile hair, the medium settings (5-6) are better for normal or "medium-textured" hair, while the 7-9, high settings are ideal for thick or coarse hair. That said, T3 does suggest dropping the temperature down 1-2 settings if your hair color-treated.

Close up of power switch T3 SinglePass Smooth X flat irons

(Image credit: Future)

When the straightener reaches your chosen temperature, the flashing lights turn solid to let you know it's ready to use. The Smooth X will then remember your chosen setting for the next time you use it. A small downside is that the position of the power button makes it easy to accidentally change temperature mid-style.

If you have thicker or longer hair, or your hair has been damaged from chemicals or over styling, you'll likely get much more use and benefit from having a wide temperature range. I've never been overly fussed about having a range of temperatures choices as my fine hair is pretty malleable. However, I welcomed the ability to drop or increase the heat as and when needed.

Features-wise, the Smooth X uses the same SinglePass technology found in all of the stylers in the SinglePass range. This technology uses a microchip that continuously monitors the temperature, preventing hot or cool spots. This means you can style your hair in a single pass, reducing the need to repeatedly glide over the same section. This not only saves time but helps reduce heat damage.

The CeraSync Heaters inside the styler then make sure the heat is distributed evenly across the plates for fast and consistent styling. These heaters work in tandem with the ceramic plates and SinglePass tech to keep an optimal and steady temperature. All of this combines to make the Smooth X a good-looking, easy-to-use and effective styler for a wide range of hair styles and types.

  • Design score: 5 out of 5

T3 SinglePass Smooth X review: performance

  • One pass is enough to smooth hair
  • Longer plates allow for faster styling
  • Excellent straightener for curling

The well-thought-out design and functionality of the SinglePass Smooth X really comes to life when you start using the flat iron for different styles and finishes. For me, with my long, thin and naturally curly hair, the extra-long ceramic plates are a particular strength. They not only glide smoothly through the hair, for both straightening and curling, but the added length and SinglePass technology means I can finish styles quickly and efficiently.

It took a little over two minutes to straighten my long hair, and I styled the majority of sections with a single pass on my preferred temperature setting of 340F / 171C, or setting 5. Technically, my hair is fine and color-treated so, based on T3's advice, I should be styling on setting 2 or 3. However, I found that while it still styled my hair well at this temperature, the style didn't hold anywhere near as well.

The consistent, even heat across the plates seemed to make a difference in speed, but also in minimizing frizz. This was particularly noticeable when curling my hair; other straighteners tend to create curls that are uneven, the Smooth X heated every part of hair and curl evenly ,meaning the shape was more uniform from top to bottom.

The beveled edges of the plates then allow for smooth curling without leaving creases in the hair, something I’ve struggled with when using other straighteners with more blocky plates. The shape, size and design of the Smooth X also makes creating waves a doddle, and the results during my tests were always polished and consistent.

T3 SinglePass Smooth X straighteners, viewed from above, on reviewer's marble dressing table

(Image credit: Future)

Sadly I was underwhelmed with how my hair looked after being straightened. This is partly due to how thin my hair is, but also, ironically, because of how well the plates glide and flatten frizz. As my hair is naturally curly, I usually only use a flat iron to knock out this frizz. I don't like to create super sleek, straight styles as they tend to leave my thin hair looking limp, flat and greasy. This was the case with the Smooth X, unfortunately.

It almost straightened my hair into submission and there was very little movement. It is possible to bring movement to straight hair without having to sacrifice a smooth finish – as I experienced with the mdlondon Strait – but the Smooth X did not achieve this balance. That said, if you have thicker hair or love sleek looks, the Smooth X will likely work exactly as you expect, and want.

Reviewer holding T3 SinglePass Smooth X flat irons with a turquoise background

(Image credit: Future)

Plus, moving the tool around my head was always comfortable, no matter which style I created. The swivel cord gives plenty of room and movement, and the weight of the straightener is balanced enough that it didn’t feel too heavy, even after styling for a while. The heat-up time is fast too, reaching setting 5 in just 10 seconds and setting 9 in 15 seconds.

I found that the power button, though convenient for switching settings before styling, can easily be pressed during use, which can be a bit annoying mid-styling. Some online reviewers have also said that the hinge tension can loosen over time, which can make it harder to maintain even pressure across the plates. I didn’t experience this myself during my review, but it’s something to keep in mind for long-term use.

  • Performance score: 3.5 out of 5

Should I buy the T3 SinglePass Smooth X?

Buy it if...

You have long or thick hair

The extra-long plates coupled with the wide range of temperatures available make the Smooth X a great choice for people with thick, long hair.

You like to curl your hair with straighteners

The Smooth X's biggest strength is the way it creates curls and waves. The long plates, streamlined shape and even heat make it quick and easy to curl your hair in minutes.

You prefer or need multiple heat settings

With nine temperature settings, you can easily adjust the heat on the Smooth X to suit your hair type and avoid damage.

Don't buy it if...

You're on a budget

While you get a lot of tech, and quality with the Smooth X, its $150 price tag may push it out of the reach of people on a budget.

You need a travel-friendly tool

While compact, the Smooth X's extra length means there are other, smaller stylers that may be better for travelling. It's also not dual-voltage, which can be limiting for international travel.

You have short or mid-length

The Smooth X's extra-long plates are welcome for long and thick hair but if you have a style that takes little effort, you may not need the longer plates.

How I tested the T3 SinglePass Smooth X

  • Tested a range of temperature settings
  • Created a range of straight and curly looks

For my T3 SinglePass Smooth X review I spent a month using it as my main hot styling tool. I created a series of different looks for different occasions including straight, curly and wavy styles and put a range of temperature settings to the test. I timed how long the styles took to complete and monitored the finish and condition of my hair.

First reviewed: September 2024

Smeg Combi Steam Oven review: a multi-functional countertop oven that looks stunning and cooks well
3:00 pm |

Author: admin | Category: Air Fryers Computers Gadgets Home Small Appliances | Comments: Off

Smeg Combi Steam Oven: one-minute review

There’s no denying that the SmegCombi Steam Oven is a sleek and beautiful piece of kitchen technology that cooks food well in a variety of ways. I tried out the bake, convection bake, air fry, and steamer functions as well as a number of the preset recipe functions. Every single item I made came out perfectly delicious, though I did need to keep an eye on my food and I took a couple of items out early to prevent overcooking.

However, there is one major issue I had with the Smeg Combi Steam Oven. I cannot figure out exactly who this countertop oven is for or what it might replace in one’s kitchen. I already own an oven and a toaster oven and the Combi can’t replace either of those. It’s too small to replace an oven, unless you live in space that doesn’t have room for a full-sized oven. I suppose it could replace a toaster oven, but it has a much larger footprint than the (similarly-sized on the inside) toaster oven I already own. And while I’m sure you can make toast in it, like in any kind of oven, there is no designated toast feature on the Combi.

Smeg Combi Steam Oven: price and availability

  • List price: $999.95 (about £770 / AU$1,500)

That’s right, the Smeg Combi Steam Oven is over $1,000 once you pay sales tax. It’s available at upscale kitchen stores like Williams-Sonoma and Crate and Barrel.

The Smeg Combi Steam Oven is only available in the US at the time of writing, but it may become available internationally at a later date.

  • Value score: 3/5

Smeg Combi Steam Oven: specifications

SMEG Combi Steam Oven: design and features

  • Beautiful mid-century aesthetic
  • Two knobs to access a variety of functions
  • Bake, air fry, steam, and more

The Smeg Combi Steam oven is advertised as a 10 in 1 oven. Just don’t call it a toaster oven! It’s a countertop oven that cooks in a whole bunch of different ways. According to Smeg, the oven uses "Galileo Multicooking technology: innovative airflow patterns and professional algorithms for outstanding results in a compact design.” It offers traditional cooking functions like bake and convection bake along with steam and air fry functions to perform a variety of cooking tasks.

The Combi has 33 automatic chef recipes that take the guesswork out of cooking meat, fish, vegetables, bread, pizza, and desserts. Just choose your preset, pop in your food, and get ready for some deliciousness.

Smeg Combi Steam Oven with accessories

(Image credit: Karen Freeman / Future)

The enamel mid-century design is sleek and gorgeous. You can choose from five different colors: black, white, red, cream, and light blue. It comes with the following cooking accessories: two grill racks, an enameled cooking tray, and a perforated cooking tray. The guides along the sides of the oven have two different positions so you can cook on the upper level, lower level, or both at once. The guides can also be removed so you can easily access the sides of the oven for easier cleaning. The window is large and the light inside is always on while cooking so you can keep a close eye on your food’s progress.

The top of the Combi opens up to reveal a water compartment, where you pour in water for the steam function. The interior of the lid has a cheat sheet with all of the chef presets listed as well as a QR code so you can access the owner’s manual, how-to videos, and other information. This water tank is why the Combi is so large - much larger than any toaster oven I’ve ever seen. However, the interior is virtually the same size as my large toaster oven, just two inches wider.

Smeg Combi Steam Oven open water compartment

(Image credit: Karen Freeman / Future)

There are two dials for controlling the SMEG Combi Steam Oven and a screen between them. There are three menus you can access via the left dial: Traditional Cooking Menu, Steam Cooking Menu, and Chef Menu. The Traditional Cooking Menu lets you choose broil, air fry, bake, convection bake, convection bottom bake, warm, and defrost.

Within the Steam Cooking Menu, you can choose convection (for pure steam cooking), convection bake (for bake plus steam), and convection broil (for broil plus steam).

When you enter the Chef Menu, you can choose from among 33 presets for a variety of meats, fish, vegetables, desserts, and breads. The use of the dials definitely takes some studying of the user manual and some practice. It’s not necessarily intuitive.

  • Design score: 4.5/5

Smeg Combi Steam Oven: performance

So how did the Combi perform? Overall, excellent. I cooked a bunch of meals in the Combi and there wasn’t a dud in the bunch.

There was definitely a weird smell the first couple of times I used it, even though I performed the one hour burn off (empty oven on highest setting) to get rid of any residues left from the manufacturing process. And it’s quite noisy, getting up to 65 dB(A) at times.

However, unlike every toaster oven I’ve used, it doesn’t get hot on the outside. Even when going full tilt, it only reached a very touchable 76 degrees on the outside. The fan stays on while the oven cools down after cooking is complete, presumably to help it cool down faster. It does take some time to cool down, and a progress bar on the screen lets you know how the cool down is progressing.

SMEG Combi Steam Oven cooking homemade sweet potato fries

(Image credit: Karen Freeman / Future)

I made two different kinds of (sweet potato) french fries: from scratch and pre-made frozen. For the scratch variety, I cut up a sweet potato and coated the wedges in oil and seasonings.

SMEG Combi Steam Oven just cooked sweet potato fries from frozen

(Image credit: Karen Freeman / Future)

The frozen ones I just dumped out on the tray. I used the French Fry Chef Menu preset for both, which was actually a traditional baking mode rather than an air fry mode as you might expect. In both cases, the fries came out crisp on the outside, soft on the inside, and totally delicious. I also baked a sweet potato whole using convection bake as I typically would and that also came out great.

SMEG Combi Steam Oven muffins

(Image credit: Karen Freeman / Future)

I baked blueberry muffins using the Muffin preset from the Chef Menu, which includes steam. The muffins came out moist and delicious. I’d say the browning was a bit uneven; I took them out one minute early because I was afraid some of them might overcook. I probably didn’t need to do that, though.

SMEG Combi Steam Oven roasts brussels sprouts and peppers

(Image credit: Karen Freeman / Future)

I used the Roasted Vegetables preset many times, since I eat them just about every day. The most challenging vegetables I made in the Combi this way were brussels sprouts. I make them all the time; when I make them on the stovetop they tend to be slightly soggy but when I make them in the oven they tend to dry out (unless I use a ton of oil.) In the Combi, I used a minimal amount of oil, just a quick spritz all over. They came out crisp, tender, and amazing.

Smeg Combi Steam Oven air fried vegetables and veggie burger

(Image credit: Karen Freeman / Future)

I also tried making vegetables in Air Fry mode, using a recipe I found online. I put broccoli, red peppers, and a frozen veggie burger patty in for 10 minutes at 390 degrees. Again, the veggies were delicious: crisp and tender. The burger was fully cooked, just right.

SMEG Combi Steam Oven cooks up a frozen pizza

(Image credit: Karen Freeman / Future)

I had to make pizza in the Smeg Combi Steam Oven. There is a dedicated Pizza preset in the Chef Menu, but since Smeg is an Italian company, I know it was talking about homemade pizza. I wanted to make frozen pizza. In fact, I made two different ones over the course of my testing period.

In both cases, I followed the directions on the box. I did one in convection bake mode and ended up taking it out a couple of minutes early so it didn’t burn. I did the second one in regular bake mode, and actually had to add a couple of minutes to the bake time. In the end though, both pizzas came out perfect: lightly browned, fully cooked in the middle, not burnt anywhere.

Smeg Combi Steam Oven steams pierogies

(Image credit: Karen Freeman / Future)

I steamed frozen pierogies (potato dumplings) using the steam mode. The pierogies came out fully heated through, moist, and delicious.

I didn't make toast. Why? Because there is no dedicated toast function. Obviously you can Google how to make toast in any oven, but I cannot for the life of me figure out why Smeg didn’t include a toast setting in the Chef Menu.

Cleanup isn't exactly a breeze, because everything is hand wash only. The trays definitely take some elbow grease, but I was able to get them completely clean every time. The oven itself is another story. The instructions say to let the oven cool and then use a regular cleaner, nothing abrasive, to clean the Combi. I did exactly that, using Dawn Powerwash and a Scrub Daddy (gentle sponge).

When that wasn’t enough, I went out and bought some Dawn Professional Heavy Duty Degreaser. That didn’t do it either, despite plenty of elbow grease. I don’t want to damage it with an abrasive cleaner or steel wool, so it just isn’t as clean as I’d like.

  • Performance score: 4.5/5

Should you buy the Smeg Combi Steam Oven?

Buy it if

You want a sleek and stylish countertop oven

The Smeg Combi Steam Oven is a beauty for sure. Since it comes in five different colors, at least one of them will look amazing in your kitchen.

You want a multi-functional mini oven

The Combi lets you air fry, bake, steam, and more with a flick of the dials.

You want an easy way to cook quick and delicious food

I’m all about getting a good meal on the table without a lot of fuss and the Combi definitely helped make that happen.

Don't buy it if

Money is a consideration.

At over a grand (with sales tax) this costs more than some full-sized ovens and far more than a toaster oven.

You want to replace one of your current appliances

The Combi takes up a lot of counter space and I don’t know what appliance this would replace. Maybe your toaster oven, but only if you have no need of a dedicated toast function.

You want easy cleanup

I’ve cleaned and cleaned the Combi but it remains stained at the bottom. An abrasive cleaner might do the trick, but Smeg warns against using abrasives.

Smeg Combi Steam Oven: also consider

If you're not sure about the Smeg Combi Steam Oven, here are some other options to consider...

Ninja Double Oven Air Fryer

Cook two different items two different ways at the same time in this two-compartment air fryer oven. While not cheap, it’s a lot cheaper than the Smeg Combi Steam Oven, and earned a place in our roundup of the best air fryers.

Read our full review here.

Ninja Combi Multi-Cooker

This ultra-flexible countertop oven bakes, steams, air fries, and more. While it’s not nearly as pretty as the SMEG Combi Steam Oven, it has a lot of the same functionality for a lot less money.

Read our full review here.

How I tested the SMEG Combi Steam Oven

  • I used multiple Chef Menu functions
  • I tested air fry, bake, convection bake, and steam modes
  • I cleaned it after each use

I’ve tested quite a few kitchen appliances over the years, both for review purposes and in my private life as the primary cook in my family for several decades. I love a cool cooking gadget and anything that lets me get a nutritious meal on the table fast.

I tested the Smeg Combi Steam Oven for about two weeks. I cooked a variety of foods using a variety of cooking modes, as detailed in the Performance section above. I used a few different presets in the Chef Menu section, as well as the bake, convection bake, steam, and air fry modes. I cooked a variety of fresh vegetables, french fries (both fresh and frozen), muffins, pierogies, veggie burgers, and frozen pizzas. After each cooking session, I cleaned all the accessories and the oven itself to assess how easy it was to clean.

Read more about how we test.

Deals: price drops for Galaxy S24+, A16 5G, CMF Phone 1 and Surface Pro (with SD X Elite)
1:19 pm |

Author: admin | Category: Mobile phones news | Comments: Off

A couple of weeks ago, the Samsung Galaxy S24+ was down to £800 for a 12/256GB model, now that same unit will cost you £50 less. You can also pick up a 512GB phone, but that is a £100 upgrade. The S24+ has a 6.7" QHD+ LTPO display, an Exynos 2400 chipset and a 4,900mAh battery with 45W/15W charging, plus a 50+10+12MP camera. Samsung Galaxy S24+ £250 off£10 Galaxy Store credit Read our review 12/256GB - £750 at Amazon UK 12/512GB - £850 at Amazon UK The...

Hands-on with Infinix’s E-Color Shift 2.0 concept phone
9:41 am |

Author: admin | Category: Mobile phones news | Comments: Off

Back in 2018, Dai Nippon Printing unveiled an e-ink dress that could create new designs on the fly. Last year, BMW showed off the i Vision Dee concept car, which similarly had color-changing e-ink panels. Wouldn't it be a shame to have such things if your phone couldn’t change its look to match them? Infinix loves experimenting with technology like this. The Infinix Concept Phone 2021 had both a solid electrochromic film that could change colors and an electroluminescent film that could light up. Earlier this year we got hands-on time with another prototype device, which used E-Color Shift...

Weekly poll: the OnePlus 13 will be available near you soon, will you buy one?
6:14 am |

Author: admin | Category: Mobile phones news | Comments: Off

Unlucky number or the best one yet? The OnePlus 13 is one of the best performing Android phones for October, thanks to its Snapdragon 8 Elite chipset. The new model also boosts battery capacity to 6,000mAh (600mAh more than the 12). OnePlus 13 Also, it leaves optical fingerprint readers behind in favor of an ultrasonic reader. Plus, it finally brings a dust and water resistance rating worthy of a flagship (IP68/69 vs. IP65). It can’t be all good news, though, the OnePlus 13 is slightly more expensive than its predecessor – the base 12/256GB model starts at CNY 4,500, while...

Weekly poll results: the small Xiaomi 15 beats the Xiaomi 15 Pro in the polls
2:44 am |

Author: admin | Category: Mobile phones news | Comments: Off

Small phones – well, smaller phones – have ardent supporters and it is quite evident in last week’s poll. The Xiaomi 15 is not exactly tiny, but it is smaller than the majority of Androids, especially the high-end ones, which rarely dip below 6.7” displays. The Xiaomi 15 had a very positive reception that can only improve with strong reviews. There was a sentiment that the phone is too expensive (indeed, it costs a bit more than the Xiaomi 14 last year), but the overall impression is a good one. Xiaomi 15’s chief rival may be the vivo X200 Pro mini, but we’re yet to see each company’s plan...

Weekly poll results: the small Xiaomi 15 beats the Xiaomi 15 Pro in the polls
2:44 am |

Author: admin | Category: Mobile phones news | Comments: Off

Small phones – well, smaller phones – have ardent supporters and it is quite evident in last week’s poll. The Xiaomi 15 is not exactly tiny, but it is smaller than the majority of Androids, especially the high-end ones, which rarely dip below 6.7” displays. The Xiaomi 15 had a very positive reception that can only improve with strong reviews. There was a sentiment that the phone is too expensive (indeed, it costs a bit more than the Xiaomi 14 last year), but the overall impression is a good one. Xiaomi 15’s chief rival may be the vivo X200 Pro mini, but we’re yet to see each company’s plan...

« Previous PageNext Page »