Organizer
Gadget news
I tested Dyson’s impossibly compact new vacuum, and it was a revelation – here’s why
9:30 am | February 2, 2026

Author: admin | Category: Computers Gadgets Home Small Appliances Vacuums | Comments: Off

Dyson PencilVac: two-minute review

The Dyson PencilVac looks nothing like any vacuum I've seen before. All the mechanisms – the motor, filters, battery, and even the dust cup – are hidden within the handle, which measures just 1.5 inches / 3.8cm in diameter. That isn't the only unique thing about the PencilVac: the floorhead is also very quirky, with its four, fluffy, conical rollers rotating in opposite directions to lift dirt and buff your floors clean.

In use, it's the most nimble vacuum I've tested. The head appears to hover across the floor; it can be used forwards or backwards, and lie completely flat to the ground. With a bit of practice, you can make the floorhead do figure eights.

Those fluffy rollers are specifically meant for use on hard flooring – there's nothing to agitate carpet fibers to release trapped dirt. The suction power is in line with what I'd expect for a hard floor-specific vacuum, too: a relatively low 55AW of power, when most of the best Dyson vacuums have at least double that.

That power proved plenty to whisk away dog hair and dust from my hard floors, however. I could see it was doing a good job, because lasers installed in the front and back of the floorhead do a stellar job of illuminating any lingering dirt.

There are a couple more compromises for that ultra-streamlined, super-light build. The battery life is rather limited, topping out at 30 minutes per charge. The dust bin is small, too, although air compression helps maximize the amount you can fit into the physical space.

Dyson Pencilvac

(Image credit: Future)

The only issue I think is a genuine mistake on Dyson's part is that the floorhead comes to a slight point, which means it can't sit flush to a wall. This makes it really tricky to get a thorough edge clean. It's extra-annoying here given the emphasis on maneuverability and thoroughness of coverage. This shape is dictated by the tapering rollers, which are designed to prevent hair wrap, but I've found Dyson's Motorbar and Fluffy floorheads do this perfectly well without the need for a tapering roller.

It's a relatively minor complaint in what is a genuinely impressive feat of engineering – and a useful one at that. If you have mostly hard floors and want a nimble, lightweight vacuum that will and highlight hidden dust as you clean, you'll struggle to find something better than this. Read on for my full Dyson PencilVac review.

Dyson PencilVac review: price & availability

  • List price: US TBC / £429.99 / AU$949
  • Available: US TBC / UK 10 Dec / Australia August 2025
  • Launched: Summer 2025

The PencilVac was announced in June 2025 and went on sale in Australia in August. A UK launch followed in December 2025. At time of writing, it isn't yet available in the US. At the list price it costs £429.99 / AU$949 (discounted to AU$798 at time of writing). That's equivalent to around $590 in the US, although actual pricing is unknown.

That puts the PencilVac in the premium price bracket for vacuums. You're paying extra for the unique design here (and a little bit for the Dyson name). In terms of specs such as suction power, runtime, and even special features and accessories, it doesn't compare favorably to other models on the market. However, if you want something ultra-light and maneuverable, there's nothing else like it (for now, at least...). The build quality is excellent, as I'd expect from Dyson.

  • Value for money score: 3.5 out of 5

Dyson PencilVac specs

Weight (no attachments):

2.1lbs / 0.94kg

Weight (with wand and main floorhead):

4lbs / 1.8kg

Bin size:

0.08L

Max runtime:

30 mins

Charge time:

2hrs

Size (H x W x L):

46.5 x 6.3 x 8.9in / 118 x 15.9 x 22.6cm

Max suction:

55AW

Modes:

Eco, Med, Boost

Dock size (H x W x L):

10 x 10 x 11.5in / 25.5 x 25.4 x 29.3cm

Dock cable length:

5.4ft / 1.6m

Dyson PencilVac review: design

  • Lightweight, compact build, with all mechanisms hidden in handle
  • Extremely maneuverable, can be used either way around
  • Small dust cup, but uses air compression to maximize space

The design here is unique. There's no visible battery, motor, filter, or dust cup section. Instead, all that is packed within the wand, which measures 1.5 inches / 3.8cm in diameter. To achieve that, Dyson has had to re-engineer its motor to one that's incredibly compact – the Hyperdymium 140k motor is just 1.1 inches / 2.8cm wide, and hidden entirely within the handle.

The PencilVac in general is very lightweight, at 4lbs / 1.8kg (by comparison, the V8 is 5.5 lbs / 2.5kg with wand and floorhead attached), and extremely nimble.

Dyson Pencilvac

(Image credit: Future)

The battery forms the top section of the wand, and can be removed and swapped. Moving down you'll find the controls – there are just two buttons: an On/Off, and a second button to switch modes (Eco, Med and Boost; there's no auto-adjustment here). A small screen displays the mode you're using and how much time you have left on the clock.

Dyson Pencilvac

(Image credit: Future)

Move down further and you'll find the dust cup behind a transparent casing; this allows you a view as it fills up. Rather unusually, the dust collects at the top of the bin section. Not surprisingly, the capacity is rather limited, at 0.08L (most of Dyson's stick vacuums have a 0.8L bin). However, the PencilVac apparently uses air to squish down the particles, so that they take up as little room as possible. As such, Dyson says that this cup will hold up to five times its physical volume.

To empty the bin, you remove the floorhead and slide the whole casing down. The dust and dirt then shoots out of the bottom. This process is straightforward and works well, although I did find particles got stuck in and around the bin casing.

Dyson Pencilvac

(Image credit: Future)

At the end of the wand you'll find the new Fluffycones floorhead – another unique part of the PencilVac. This a kind of hybrid between the All Floors Cones Sense floorhead introduced with the Dyson V16 Piston Animal, and the Fluffy cleaner head that made its debut with the Dyson V15 Detect.

Instead of having one or two tube-shaped rollers, the Fluffycones head has four conical ones. The tapering shape is designed specifically as a way to deal with long hair: rather than becoming tangled around the brush roll, the strands should make their way down to the small end of the cone where they drop off in a clump, and can be vacuumed up in a single pass. It's an idea that Dyson first used in its Hair screw tool.

Dyson Pencilvac

(Image credit: Future)

However, unlike the All Floors Cones Sense head, the rollers here are entirely covered with soft, fluffy fabric. This is perfect for use on hard floors, where it can get right up close to the flat surface without risking scratches. It isn't well-suited to carpet, though, because there's nothing to agitate the fibers and release embedded dirt.

Dyson has also added a green laser to both the front and back of the Fluffycones floorhead. This is designed to highlight specks of dirt that might otherwise be missed.

The cones extend a little way past the hard plastic casing, and rotate in opposite directions, which means the PencilVac can pick up debris when pushed forwards and when pulled backwards. In fact, because it's basically symmetrical, you can use it either way around.

Dyson Pencilvac

(Image credit: Future)

Since the "wand" contains all the inner mechanisms, the PencilVac isn't quite as versatile as a traditional stick vacuum. You can't remove the wand part and use it like a hand vacuum. However, you can swap out the floorhead for a detail tool. There was one included with my review model: a "Rotating combi-crevice tool" that can be used like a traditional Crevice tool, or with the brush section engaged to sweep up dirt (NB: it doesn't actually rotate).

  • Design score: 4.5 out of 5

Dyson PencilVac review: performance

  • Excellent and very efficient pickup on hard floor, even in Eco mode
  • Not designed for use on carpet, and not sucky enough for ingrained dirt
  • Laser light is effective and useful

So how does the Dyson PencilVac perform in practice? The first thing to emphasize is how comfortable it is to use. Although it takes a moment to get used to the different grip – you hold this cleaner like a broom, rather than like a traditional stick vacuum – it's very light in the hand and maneuvers incredibly well. You can use it forwards or backwards, and the floorhead pivots with ease. With the detail tool attached, it's also super easy to clean up high or in tight spaces.

Unfortunately, the design of the floorhead isn't quite as impressive. Since it comes to a slight point at the front, it can't sit flush to a wall. This was one of my main complaints with the similarly shaped All Floors Cones Sense floorhead, and it's no less annoying here. If you can't approach an edge side-on, it's tricky to achieve a thorough clean. This kind of vacuum should be perfect for the stairs, say... except the reality is that using the PencilVac to clean along all those straight edges is a nightmare.

Dyson Pencilvac

(Image credit: Future)

This isn't the most powerful Dyson vacuum – you're getting a maximum 55AW of suction, where most Dyson stick vacs have double that. Also, the design of the floorhead doesn't lend itself to being ultra-sucky, either. Usually, the casing around the edges would descend to the floor around all four edges, creating a "vacuum" (in the original sense of the word) underneath. That isn't the case here. And because the rollers are soft all over, there's nothing to agitate embedded dust.

None of that is an issue if you're just using the PencilVac on hard flooring, which is its intended use. You don't need a ton of suction to clean hard floors, because all the dust and dirt is sat right there on the surface. But if you're seeking something for carpet, or even a vacuum that will pull the dirt from the cracks and crevices in your floorboards, this isn't it.

Dyson Pencilvac

(Image credit: Future)

To get a more objective view of how well the PencilVac cleans, I ran a series of tests using dry, loose tea (to represent fine particles) and a dry couscous/oat mix (to represent chunky debris) on the large tiles of my kitchen floor. The results were very impressive: the vacuum picked up everything in a single pass, even on the lowest Eco mode. There was minimal pinging of large particles, and the fact that the head cleans from both sides meant I could clear the spillage in half the time.

In general use, the PencilVac was a dream to use in my kitchen. The Fluffycones head seemed to hover across floors, moving smoothly and with minimal effort on my part, whisking away dirt and pet hair as it went. The lasers did a great job of illuminating dust in dingy areas, and I could easily direct the vacuum into tight corners – down the side of a sofa, for example. The only annoyance was that awkwardly angled floorhead.

Although this vacuum isn't really built for carpets, I still ran my standard carpet tests to see how it would cope. It pulled up a decent amount of chunky debris in a single forward pass in Medium mode, although it did flick other bits about.

Medium mode wasn't enough to pull many of the flecks of fine dry tea from my mid-pile carpet, and even after several passes I could still see a shadow where the tea had been sprinkled.

I also decided to try the PencilVac on the canvas-style mat in my kitchen. It pulled up a good amount of debris, and there was less pinging than there had been on the carpet. It's certainly capable of pulling surface dirt from this kind of flooring, and perfectly fine for everyday cleaning.

  • Performance score: 4 out of 5

Dyson PencilVac review: battery life

  • Promises 30 mins in Eco, 20 in Medium, and 5 in Boost
  • 2 hours recharge time
  • Battery removable and swappable

The main compromise you're making for the lightweight, compact build is a smaller battery. Larger, heavier Dyson vacuums last over an hour in their lowest-powered mode, but the runtimes on the PencilVac are much shorter. Dyson promises 30 minutes in Eco mode, 20 in Medium and 5 in the most powerful Boost mode. The battery recharges in a relatively speedy 2 hours.

Medium mode is the one I'd typically default to, and it lasted for 18 minutes at the power (less than Dyson's listed specs). That's really quite short for a middle mode, although it did give me enough time to clean three bathrooms, a large kitchen and utility room, so maybe it isn't too much of an issue. I'd also say that for hard flooring, Eco mode will actually usually be sucky enough for most situations.

I've been testing vacuums for a while now, and with the PencilVac I missed having a dirt-detecting Auto mode, although I can see why it wasn't included here. I'm pleased to see that despite the battery taking a different format, it's still removable and replaceable, which should help with the longevity of the PencilVac overall.

  • Battery life score: 3.5 out of 5

Should you buy the Dyson PencilVac?

Attribute

Notes

Rating

Value

Premium bracket – mainly because of the innovative, unique design.

3.5 / 5

Design

Almost impossibly streamlined and nimble – the only real annoyance is the angled floorhead.

4.5 / 5

Performance

Not designed for carpet, but excellent pickup on hard flooring. Dirt-illuminating lasers are useful and effective.

4 / 5

Battery life

Relatively short (as required by the streamlined design). Recharge is fairly speedy.

3.5 / 5

How I tested the Dyson PencilVac

I used the Dyson PencilVac regularly for a couple of months, to get a general feel for its performance and usefulness. I also ran specific cleaning tests including chunky particles (dry couscous/oat mix) and fine particles (dry, loose tea) on my hard floor, thin mats and carpet. I compared my findings with other vacuums I've tested, and assessed if it offered strong value for money.

Read more about how we test vacuum cleaners

  • First reviewed November 2025
vivo Y31d unboxing
8:23 am |

Author: admin | Category: Mobile phones news | Comments: Off

Let's get back to basics - great battery life, reliable build, reasonable price - that's the vivo Y31d! Even its name is far removed from the modern trends. The Y31d quietly launched this week and we're just in time for an unboxing. The phone ships with a full set of accessories - a case, a 44W charger, and a USB-A to USB-C cable. Unboxing the vivo Y31d You have a choice of Glow White and this subdued Starlight Gray. The phone is pretty reasonably sized at 166.6 x 78.4 x 8.39mm and weighs only 219g. Those dimensions don't reflect the massive 7,200mAh power pack hidden inside,...

iQOO 15R’s battery capacity and software support duration revealed
6:01 am |

Author: admin | Category: Mobile phones news | Comments: Off

The iQOO 15R is launching on February 24 for under INR50,000. iQOO has already confirmed that the 15R will be powered by the Snapdragon 8 Gen 5 SoC, run OriginOS 6, and have two color options. Now, the brand has revealed some more details about the iQOO 15R, including its battery capacity. iQOO has set up a promo page for the iQOO 15R on its Indian website, with some footnotes, and one of them reveals the 15R will pack a 7,600 mAh battery. The smartphone will receive OS updates for up to four years and security updates for up to six years. Additionally, the iQOO 15R will have the Q2...

Top 10 trending phones of week 5
3:21 am |

Author: admin | Category: Mobile phones news | Comments: Off

Xiaomi unveiled two new Redmi phones this week and they are clearly soaking in the spotlight. The Redmi Turbo 5 Max topped our trending chart, while the Turbo 5 took the third spot. Between them is the Samsung Galaxy S26 Ultra, which also made plenty of headlines as leaks kept pouring in. The Galaxy A56 took fourth, ahead of another Xiaomi pair - the Redmi Note 15 Pro+ ranking just ahead of the Redmi Note 15 Pro. [#InlinePriceWidget, 14326, 1#] We then have the vanilla member of the upcoming Galaxy S26 lineup, followed by the outgoing Galaxy S25 Ultra. Another new...

Google Pixel Buds 2a TWS earphones surface in new colors
12:59 am |

Author: admin | Category: Mobile phones news | Comments: Off

Google unveiled the Pixel Buds 2a TWS earphones last August in Iris and Hazel colors, which are expected to be joined by two new color models that have surfaced online. The new color versions of the Google Pixel Buds 2a are expected to be called Fog and Berry. The charging cases of both models are white from the outside, while the inside matches the color of the earbuds. Google Pixel Buds 2a's Fog model The differences between the Iris and Hazel models launched last year, and the upcoming Fog and Berry versions are only cosmetic since the specs and features remain the same....

Google Pixel Buds 2a TWS earphones surface in new colors
12:59 am |

Author: admin | Category: Mobile phones news | Comments: Off

Google unveiled the Pixel Buds 2a TWS earphones last August in Iris and Hazel colors, which are expected to be joined by two new color models that have surfaced online. The new color versions of the Google Pixel Buds 2a are expected to be called Fog and Berry. The charging cases of both models are white from the outside, while the inside matches the color of the earbuds. Google Pixel Buds 2a's Fog model The differences between the Iris and Hazel models launched last year, and the upcoming Fog and Berry versions are only cosmetic since the specs and features remain the same....

Xiaomi Pad 8 Pro prepares for its global debut by running Geekbench
10:31 pm | February 1, 2026

Author: admin | Category: Mobile phones news | Comments: Off

Xiaomi launched the Pad 8 Pro in China last September, and if you've been wondering whether it will get a global release ever since, we have some great news. The global version of the tablet has been spotted in the Geekbench database with the model number 25091RP04G. That "G" at the end confirms that this is in fact the model meant for markets outside of China. As you can see from the screenshot above, the tablet managed a single-core score of 2,940 and a multi-core score of 8,759 in Geekbench 6.5. Like the Chinese variant, it's powered by the Snapdragon 8 Elite chipset. The...

Oppo K14x 5G’s chipset and price bracket leak
8:01 pm |

Author: admin | Category: Mobile phones news | Comments: Off

A few days ago, Oppo started teasing an upcoming K-series device in India, and the URL for the teaser microsite revealed that the phone in question is the K14x. As the name implies, this should be the successor to the K13x, which made its debut in June of last year. Oppo hasn't shared any official specs of the K14x, nor any other information aside from the teaser image you can see below. However, a new leak today claims the K14x will be powered by the Dimensity 6300 SoC. This is the same chipset used by its predecessor, so if there are any upgrades, they will be elsewhere. No other...

The Razer BlackShark V3 gaming headset might blend in with Razer’s existing crowd, but the second you set it up, you just know it’s something special
7:00 pm |

Author: admin | Category: Computers Gadgets Gaming Gaming Accessories | Tags: | Comments: Off

Razer BlackShark V3: One-minute review

The Razer BlackShark V3 wireless gaming headset is a truly fantastic piece of kit, which has finally convinced me to move on from the same headset I've been using for years. The sleek black design strays from the tacky-looking appearance of a lot of gaming headsets without losing the iconic branding of Razer products, but it never feels garish.

Controls on both earcups are straightforward and easy to use, too, giving you all the power you need in one convenient place rather than having to mess around with additional software. Plus, with 70 hours of battery life when fully charged, you're able to sink into all your favourite games with no threat of interruption.

Its crystal clear audio when gaming, paired with the outstanding microphone quality, makes it the only headset you need for your gaming setup too rather than needing platform-specific products.

The detachable microphone also makes it adaptable to suit your style, whether you're playing with friends over Discord or roaming around in-game while listening to some tunes. It's hard to want to use another headset once you've spent time with the BlackShark V3, which is high praise coming from a creature of comfort who doesn't like to change their peripherals often.

Razer BlackShark V3 wireless headset

(Image credit: Future)

Razer BlackShark V3: Price and availability

  • List price: $149.99 / £149.99 / AU$350
  • Not exactly a budget-friendly headset, but quality makes it worth investing
  • Has almost identical features to the (more expensive) BlackShark V3 Pro

The Razer BlackShark V3 wireless headset launched in July 2025, so a reasonable two years after the previous version: the BlackShark V2 HyperSpeed. Having also used the V2 HyperSpeed in the past, I can safely say those two years of extra baking time definitely paid off, and there are some noticeable differences to make the additional $20/£20 cost worthwhile. Such as a new set of Razer Triforce Titanium 50mm Drivers, a lightweight ergonomic design which really feels as if it's putting comfort first, and a shiny new HyperClear Super Wideband 9.9mm Mic to make sure none of your audio gets missed.

Compared to other premium wireless gaming headsets on the market, like the SteelSeries Arctis Nova Pro 7P Gen 2 or Astro A20 X, the BlackShark V3 isn't an extortionately priced product. In fact, the $149.99 price tag is a reasonable ask for what you're getting, considering how many premium wireless gaming headsets fall closer to the $200 mark.

It's not an eyewatering asking price compared to something like the SteelSeries Arctis Nova Elite, yet it still feels like a worthy upgrade if you're used to rocking budget-friendly gaming headsets. Having launched alongside the Razer BlackShark V3 X Hyperspeed, a tempting $99/£99/AU$179.95 headset, you may be convinced to cut costs and go for something that sounds almost identical in name. But you'd be doing yourself a complete disservice in doing so, which I need you to trust me on.

Razer BlackShark V3: Specs

Razer BlackShark V3

Price

$149.99 / £149.99 / AU$350

Weight

9.5oz / 270g

Compatibility

Xbox Series X|S, Xbox One, PlayStation, Nintendo Switch, PC, Mobile

Connection type

2.4 GHz Wireless / USB Wired / Bluetooth

Battery life

Up to 70 hours

Features

THX Spatial Audio, detachable Razer HyperClear Super Wideband 9.9mm mic,

Software

Razer Audio

Razer BlackShark V3: Design and features

  • Black design is more elegant than RGB-intense gaming headsets
  • Super lightweight design for long-term comfort
  • Despite its middle-ground price tag, it definitely feels like a high-end product

The Razer BlackShark V3 wireless gaming headset looks practically identical to the other Razer BlackShark V3 sets: the V3 Pro and the V3 X HyperSpeed. It's got a sleek black design with subtle Razer branding on the earcups and headband, which I appreciate since so many gaming headsets would take any opportunity to shove colours and logos in your face, which is somewhere I found the Astro A20 X fell short, since its design verged on slightly too in-your-face. But it doesn't need an interesting or quirky design to be a good product. In fact, it's a perfect example of something being so simple yet so incredibly satisfying.

Razer BlackShark V3 wireless headset

(Image credit: Future)

Both the headband and the earcups have firm cushioning and padding, and aren't made of that horrible glossy material a lot of cheaper headsets use, similar to a headset like the SteelSeries Arctis Nova 5, which boasts a similar build quality and black design. The headband used a breathable, almost netted fabric, and each earcup is made from breathable Sportsweave memory foam. Since the headset almost prides itself on being for esports, these elements have clearly been carefully designed to cater to being comfortable for competitive players. But for more casual gamers like me, they just feel like a nice treat.

Despite the firmness of the cushioning on both the headband and earcups, I was surprised at how comfortable they were in use. Usually, firmer earcups make wearing glasses when gaming uncomfortable as they push the arms into the side of your head, so I was shocked when I never experienced this discomfort.

All the controls you need are located on the ear cups too, which reduces the need for external software if you don't fancy downloading, with the left featuring all the important buttons like a textured power button alongside a smooth mic mute, so there's no chance of pressing the wrong thing when wearing the set.

Razer BlackShark V3 wireless headset lying down on a wooden surface

(Image credit: Future)

In addition, a dial on the front of the ear cup is where you control your audio level, which is far easier to use than a scroll wheel on the bottom - something that most of the headsets I've used in the past specialise in. Now that I've had the convenience of a larger dial, I never want to go back to relying on these wheels, which are so easily knocked and altered.

The left cup is specifically for optimising your audio setup to suit what you're playing. Here, you've got a configurable roller which you can use for footsteps scaling in games like Battlefield 6 or Arc Raiders, game-chat balancing so you can sort out your game audio and Discord audio without having to open your audio mixer, and mic monitoring. This convenient wheel is accompanied by a smart switch button, too, in case you need to change your connection in an instant. Basically, the entire headset has been designed to make your life a lot easier and give you more game time rather than wasting precious minutes on sorting your peripherals.

Razer BlackShark V3 wireless headset lying down on a wooden surface with the microphone pointing up

(Image credit: Future)

The mic plugs into the right ear cup, too, which in itself boasts a sturdy build quality and matches the same sleek black design of the rest of the headset. If I had one complaint, it would be that the size of the foam cover is quite large, and it does feel pretty invasive given the short length of the mic as a whole.

That, and you can't conveniently store the microphone on or around the headset if you don't want to use the mic - you're at the mercy of your own ability to keep it safe when unplugged. Again, if you're used to the convenience of a compact headset like the SteelSeries Arctis Nova 5, then this may be a frustration. But these are such minor inconveniences that were almost instantly outweighed by the joy of using the headset.

Razer BlackShark V3: Performance

  • Seamless setup, which means you can jump straight into use
  • Might as well be noise-cancelling
  • Customisable to suit whatever sort of gamer you are, competitive or not

Given I'd been using the SteelSeries Arctis Nova Pro headset until now, which I really praised as my holy grail, I thought the audio quality of a cheaper headset wouldn't be as impressive, and I couldn't be more mistaken. In fact, it's hard to express how impressive the sound quality of this mid-range headset really is without you hearing it for yourself.

The SteelSeries Arctis Nova Pro headset is by no means of bad quality. In fact, I was amazed by it when I first tested it and kept using it long after. However, I often found myself frustrated by all the wires that accompany it. After meeting the BlackShark V3, I feel as though I've got all the same sound quality as the Arctis Nova Pro with the satisfaction of a wireless headset.

Razer BlackShark V3 wireless headset

(Image credit: Future)

From the second you set it up and start using the BlackShark V3, you're met with rich, deep audio, whether that's in-game or if you're just listening to some tunes while you do something else. For music-oriented games like Sword of the Sea and Herdling, two games I played during my testing of the BlackShark V3, the clear audio and almost noise-cancelling capabilities (though not actually part of the design) helped me to really sink into the game and experience each and every note in their soundtracks.

Even just watching YouTube videos or listening to in-game dialogue feels more intense, especially given the headset's ability to block out external audio without being completely noise-cancelling. The memory foam earcups really help in this regard, and they really help you from getting distracted by any noise around you.

This is also helped by the almost 70-hour battery life when fully charged, since you're rarely interrupted by those tedious beeps that remind you to plug it in. Battery life is a huge selling point with wireless headsets, which is another place the SteelSeries Arctis Nova 5, or any SteelSeries headset for that matter, becomes a close competitor with the BlackShark V3. If you do find yourself listening to these obnoxious reminders, what makes the Razer BlackShark V3 wireless headset worth investing in alone is the fact that a 15-minute charge provides you with an additional 6 hours of battery life.

Razer BlackShark V3 wireless headset's dongle on a wooden surface

(Image credit: Future)

You don't need to do any sort of additional setup to get an incredibly solid performance from the headset, though the option is there if you want it, courtesy of the additional Razer Audio software you can download. I don't usually bother with messing around with many settings, especially since I don't often find myself needing to enhance my audio to hear things like footsteps or distant gunshots, but it felt rude not to at least try it out in a game of Arc Raiders.

So, I downloaded the Razer Audio app and started playing around, and was once again pleasantly surprised with how easy it was to take your audio customisation that one step further. Paired with the configurable wheel, it feels as if the Razer BlackShark V3 headset really has been designed to enhance your gaming. Even though the packaging blatantly says it's an esports headset, all these details and ways to make your gaming experience that little bit easier by utilising all the audio cues of other players certainly reinforce that factor.

Although you can use Razer Synapse to customise things like your EQ settings and play around with THX Spatial Audio, the dedicated audio app definitely feels easier to use. Plus, having it conveniently on your phone rather than a desktop means you can more seamlessly customise your settings across platforms rather than having one setup on PC, and then others programmed in the app for console.

Razer BlackShark V3 wireless headset lying down on a wooden surface with the ear cups facing toward the camera

(Image credit: Future)

The buttons are incredibly well-positioned on both earcups, too. Unless you're a frequent connection switcher or a competitive gamer, you rarely need to use the left cup. And, the added texture on the power button makes using the buttons a breeze rather than having to go through that awkward fiddly phase of hitting the wrong thing when you change your headset, and you're not quite used to where everything is. Yes, I'm definitely projecting, but it's one of those little things that you don't really appreciate until you experience it.

Its impressive performance doesn't stop at its stellar button placement and crystal clear audio either. The 9.9mm HyperClear Super Wideband detachable mic offers astounding quality given its mid-range price tag, so much so that I actually received compliments on the "noticeable upgrade" compared to my old headset when jumping into a Discord call with my friends.

Should I buy the Razer BlackShark V3?

Buy it if...

You find that comfort is key to a good session
The BlackShark V3 wireless gaming headset has been designed to be just as comfortable as it is impressive. If you often find yourself tethered to your setup for hours on end, having a comfortable headset is a must, and not once did I find any part of the headset uncomfortable, even as someone who wears glasses when gaming.View Deal

You're looking for a way to really get the most out of your audio
If you've ever been intimidated by all the additional software that comes with gaming headsets these days, the Razer BlackShark V3 and Razer Audio app do everything they can to make it more accessible. It's got all the flourishes you need to really make the most of the headset without being inundated with options and not knowing where to start. View Deal

You feel like your current headset isn't offering you the richest sound quality
What separates a good headset from a great headset is its audio quality, so if you're underwhelmed with what you're currently receiving, the BlackShark V3 is bound to impress with its audio quality. Even without tampering with any of the sound settings, this headset is built to offer you crystal clear audio from the moment it is fresh out of the box and switched on. View Deal

Don't buy it if...

You constantly jump in and out of calls, but don't want a massive mic in your face
It's hard to advise against the BlackShark V3, but the fact that there isn't any way to keep the mic safe and sound on the headset could definitely put some players off. If you like the convenience of how a SteelSeries mic tucks into the earcup, or a Turtle Beach headset mic slides neatly up the side of the headband, this set might feel like more of an inconvenience.View Deal

Also consider...

Still not sold on the Razer BlackShark V3 wireless gaming headset? Here's how it compares to two similar sets.

Razer BlackShark V3 wireless

Astro A20 X

SteelSeries Arctis Nova 5

Price

$149.99 / £149.99 / AU$350

$179.99 / £169.99 / AU$349.99

$129.99 / £129.99 / AU$139.95

Weight

9.5oz / 270g

10.23oz / 290g

9.5oz / 266g

Compatibility

PS5, Xbox Series X|S, Xbox One, Nintendo Switch, PC, Mobile

PS5, PS4, Nintendo Switch, Nintendo Switch 2, PC, Android, iOS

PS5, PS4, Xbox Series X|S, Xbox One, Nintendo Switch, PC, Mac, Mobile

Connection type

2.4 GHz Wireless / USB Wired / Bluetooth

Bluetooth / Lightspeed Wireless / Wired USB-C

Wireless (2.4GHz via dongle), Wired (USB-C), Bluetooth 5.3

Battery life

Up to 70 hours

40 hrs (default lighting), 90hrs (RGB off)

Up to 60 hours

Features

THX Spatial Audio, detachable Razer HyperClear Super Wideband 9.9mm mic,

Detachable 48kHz / 16 bit omni microphone, Lightsync RGB, Playsync Base

360-degree spatial audio, retractable ClearCast 2.X mic

Software

Razer Audio

Logitech G Hub (PC) / Logitech G app (mobile)

SteelSeries Arctis Nova 5 Companion App (mobile), SteelSeries GG

Astro A20 X
The Astro A20 X is a similarly priced product to the BlackShark V3, but it packs a bit more personality in its design through its RGB. If you don't fancy its flashy appearance, turning the RGB off ensures a battery life of up to 90 hours, beating the BlackShark, and this headset also boasts impressive audio quality alongside a fantastic detachable microphone.

For more information, check out our full Astro A20 X review.View Deal

SteelSeries Arctis Nova 5
The quality of gaming audio that the SteelSeries Arctis Nova 5 offers is what makes it a suitable competitor against the BlackShark. With this SteelSeries headset, you're also getting a crystal clear mic, alongside a plethora of customisation options to ensure you're getting the very best out of your audio.

For more information, check out our full SteelSeries Arctis Nova 5 review.View Deal

How I tested the Razer BlackShark V3

  • Compared with my beloved SteelSeries Arctis Nova Pro headset
  • Used every day for gaming and other media
  • Mic tested in Discord calls and Google meets

As soon as I realised just how quality the BlackShark V3 was, I ditched my old SteelSeries Arctis Nova Pro headset. So, for two weeks, I've relied on this bit of kit to carry me through all sorts of adventures in games like Sword of the Sea, Once Upon a Katamari, and even made the most of its customization in a couple of rounds in Arc Raiders. Outside of gaming, it's also accompanied me for hours upon hours of Spotify sessions and the odd evening watching Netflix. If anything, these almost all-nighters definitely put the battery life to the test, too.

I also spent around 10 hours testing the BlackShark V3 with the PS5 in a decent session of Red Dead Redemption 2. I will admit, I wasn't jumping in for the fast, gunslinging combat, so I can't comment on how immersive that is. But, I must say the BlackShark V3 is phenomenal when it comes to showing off the natural sound design. Birdsong is clear as day with this headset, and I could've quite happily spent a lot longer riding around on my horse and tracking down every bird I could hear - something that I'd missed out on entirely when just relying on my TV's default speakers.

To test the microphone, I used the BlackShark V3 for meetings, voice calls, and multiplayer games like Peak, R.E.P.O., Outlast Trials, and shouting at my friends over Discord. Although I'd already put my old SteelSeries headset to one side, I did dust it off for a quick comparison, alongside my wireless Razer Kraken Hello Kitty and Friends edition Bluetooth headset, and they just don't compare.

First reviewed December 2025-January 2026.

Read more about how we test

Galaxy A37, A57 renders, S26 prices leak, Realme P4 Power official, Week 5 in review
5:31 pm |

Author: admin | Category: Mobile phones news | Comments: Off

The Samsung Galaxy A37 and A57 are coming soon, though we don't know when exactly. But their official-looking renders have given us their design and hint at their specs. The A57 will measure 6.9mm and weigh 182 grams - both slimmer and lighter than the A56. Upfront, it packs a 6.6-inch TCL SCOT flexible OLED. Expect Samsung’s Exynos 1680 chipset and a 5,000mAh battery with 45W charging. The S26 series pricing leaked. The S26 could see a price increase due to the move to a starting point of 256 gigs. The S26+ will likely be the same price as its predecessor, specced the same. Finally, the...

« Previous PageNext Page »