Organizer
Gadget news
I tested out the LG UltraFine 6K Evo 32U990A – a 6K monster of a monitor with 21 million pixels but also a few flaws
6:22 pm | February 9, 2026

Author: admin | Category: Computers Gadgets Pro | Tags: | Comments: Off

If you think more pixels makes for a better PC monitor, you're going to love the new LG UltraFine 6K Evo 32U990A. This 6K monster of a monitor has over 21 million of them. For context, a 4K display has just eight million. It's a massive step up.

What you don't get, at least not compared with a regular 32-inch 4K monitor, is more actual display size. Instead, those 21 million pixels are crammed into essentially the same 32-inch diagonal, resulting in much, much higher pixel density. Where 4K on a 32-inche monitor comes in around 140 pixels per inch, the LG UltraFine 6K Evo 32U990A clocks in at 224 pixels per inch.

In other words, this is a true high-DPI display. It's a pretty high-performance display by several other metrics, too, at least for an IPS as opposed to an OLED monitor. There's good colour coverage and true 10-bit fidelity, for instance.

Less impressive is the 60Hz refresh. It's perhaps inevitable given the epic resolution and this monitor's productivity rather than gaming remit. But here in 2026, 60Hz seems a bit sluggish, as does the quoted 5ms pixel response time. Countering that is excellent connectivity, including dual Thunderbolt 5 ports and plenty of further USB-C inputs and outputs.

As for value, well, it all depends how you're coming at this LG. Compared to the near-enough $6,000 Apple Pro Display XDR, which is also 6K and 32 inches, it's a bargain, if less capable in some important ways. But at $1,999 or £1,799, it's also way more expensive than most of the best 4K monitors available today. So, you'll really want to appreciate those extra pixels.

LG UltraFine 6K Evo: Design and features

LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
  • Minimalist design
  • Mediocre build quality
  • Excellent connectivity
Specs

Panel size: 32-inch

Panel type: IPS Black

Resolution: 6,144 x 3,456

Brightness: 450 nits SDR, 600 nits HDR

Contrast: 2,000:1

Pixel response: 5ms GtG

Refresh rate: 60Hz

Colour coverage: 98% DCI-P3

HDR: VESA DisplayHDR 600

Vesa: 100mm x 100mm

Connectivity: DisplayPort 2.1 x1, HDMI 2.1 x1, 2x Thunderbolt 5 with 96W PD upstream, 1x Thunderbolt 4 downstream,1x USB-C upstream, 2x USB-C downstream, 1x USB-C upstream

The LG UltraFine 6K Evo 32U990A is a slick display that looks like it's been designed to please Apple Mac users. In terms of pure aesthetics it will do just that, thanks to its minimalist vibe, slim bezels and engineering elements like a display hinge that mimics Apple's Pro Display XDR.

However, it's not as nicely built as either of Apple's own monitors, the Studio Display or the aforementioned Pro Display XDR. The mix of plastic and metal used here doesn't feel even nearly as premium as the lush alloys of the Apple alternatives. The huge external power brick is also a little untidy compared to monitors with integrated power supplies.

Still, by PC monitor standards, this LG is well enough screwed together and offers a decent range of adjustability from its stand. It also boasts excellent connectivity. You get dual Thunderbolt 5 ports with 96W of power delivery, just for starters.

To that you can add DisplayPort 2.1, HDMI 2.1 and another three USB-C ports. Together, that ensures pretty much all your connectivity needs are covered, including single-cable connectivity with a laptop, sharing the display with multiple PCs and even daisychaining with full 6K support.

Of course, the main event is the 32-inch 6K panel. It's an IPS Black item, so has heightened contrast compared with most other IPS monitors. But when it comes to not only contrast but also HDR performance, its specs still fall miles behind an OLED display.

That's no surprise given this monitor is only rated for DisplayHDR 600 certification. In other words, it lacks full-array local dimming. That said, colour coverage is good, extending to 98% of the DCI-P3 gamut and there's also true 10-bit per channel colour support without dithering.

LG UltraFine 6K Evo: Performance

LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
  • Incredibly sharp visuals
  • Good colour accuracy
  • Poor contrast and HDR performance

The LG UltraFine 6K Evo 32U990A is both stellar and disappointing in almost equal measure. But let's start with its finest quality, which is surely the incredible pixel density enabled by full 6K resolution on a 32-inch panel.

The resulting 224 pixels per inch makes for incredibly sharp visuals and fabulously clear and crisp text. It also allows for a huge amount of space for professional workflows. The appeal here compared to a mere 4K monitor, for instance, is that you can view 4K content in a window at full resolution and still have significant space left over for timelines, toolbars and more.

However, the 6K resolution and outstanding pixel density is compromised by the IPS panel's slightly old-school anti-glare coating, which introduces a touch of visible sparkle. Moreover, the step up from a 4K panel in terms of visual detail also isn't entirely earth shattering. Yes, this display is sharper and the text is crisper. But you're paying quite the price premium for those benefits.

The very fact that this is an IPS panel as opposed to OLED also makes it feel rather old fashioned. Sure, the colour accuracy at factory settings is good in both SDR and HDR modes. But even with the latest IPS Black panel tech and 2,000:1 claimed contrast, this monitor looks a bit watery and washed out compared to the latest OLED monitors. The black levels in particular look poor next to any OLED display.

In part that's thanks to the fact that this LG only has DisplayHDR 600 certification. That means it's specified with mere edge-lit backlighting, likely with around 16 zones, not full-array local dimming with hundreds or thousands of zones. In short, this is not a true HDR display.

The 60Hz refresh likewise adds to the sense of a slightly outdated display. Sure, this is no gaming monitor. But even for routine daily computing tasks, 120Hz or higher makes everything more pleasant. Of course, by IPS display standards, this is not a poor monitor. It's just, at this price point, you have so many options. What you gain in terms of 6K pixel density with this display you arguably lose in other areas.

LG UltraFine 6K Evo: Final verdict

LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future
LG UltraFine 6K Evo 32U990A in a home office during our review
LG // Future

LG's new 6K display is an exciting prospect, on paper. The combination of native 6K support using the latest IPS Black panel tech is very appealing, for sure. In practice, this premium pro display somewhat disappoints.

For sure, you get an outstanding high-DPI experience. But unless your specific workflows benefit from the extra desktop space, the subjective upgrade in terms of visual clarity and the quality of text rendering is more marginal than you might expect compared to a 4K display of the same size.

At the same time, the limitations of an IPS panel, even with improved contrast, are all too obvious at a price point that includes 4K OLED alternatives such as the Asus ProArt PA32UCDM. The comparatively poor contrast and black levels are all too obvious. There's a significant speed deficit, too, in terms of refresh rate and pixel response.

Admittedly, LG has given this display outstanding connectivity that extends to dual Thunderport 5 ports with support for 6K monitor daisy-chaining. So, in many ways, this is a very powerful productivity tool.

The problem is the 6K and connectivity upsides come with quite a few compromises. Long story short, what many will want is a display like this but based on OLED panel tech. Given the lofty pricing, that isn't an outrageous ask even if such a monitor doesn't currently exist. Until it does, if you are happy with an IPS panel and your workflows will benefit from the 6K resolution, LG's latest Ultrafine monitor probably adds up. But only barely.


For more high-resolution displays, we've reviewed the best 5K and 8K monitors.

I tested the Dell Pro Max Tower T2 – a powerful desktop workstation for engineering and AI
6:20 pm |

Author: admin | Category: Computers Gadgets Pro | Tags: | Comments: Off

The Dell Pro Max Tower T2 is not your usual business PC. It's not going to be the pick for casual users, or gamers, or admin work. And it's worth specifying that to begin with: this is a beast of a machine for professionals who need uncompromising power in engineering, AI, and all-around business performance, and who want a machine that is capable today and upgradable for the future,

Yes, it’s niche, and that’s okay. Dell doesn’t shy away from creating machines for a specific subset of users.

If you’re looking into this machine, there is a wide range in specs and pricing. The entry-level buildout is right around $1,000. But the high specs on my review unit are pushing $13,000. So, it may rank as one of the best workstations I've tested, but it certainly comes at a (hefty) price.

Dell Pro Max Tower T2: Price and Availability

The Dell Pro Max Tower T2 is available from both Dell US and Dell UK in a range of configurations.

The entry configurations are priced at around $1,000 and still include a Core Ultra 7, 16GB of RAM, a 512GB SSD, and an AMD Radeon Pro GPU.

As I mentioned, my buildout is pretty high-tier. My exact buildout is priced at $12,787 and features an Intel Core Ultra 9 285K vPro with 128 GB of RAM, an NVIDIA RTX PRO 6000 Blackwell with 96GB, 4 TB of storage, and a massive 1500W PSU… oh, and a DVDRW drive.

Dell | Pro Max T2 Tower

(Image credit: Collin Probst // Future )

Dell Pro Max Tower T2: Unboxing and First Impressions

The Dell Pro Max Tower T2 brings me down memory lane; it makes me remember the PCs I grew up on, the one I learned my fascination with computers on, and then I turned it on.

The machine that once reminded me of dial-up and waiting for a simple PDF or low•res photo to fully render is no longer reminiscent of my past at all, and simply reminds me that this is 2026 and this machine means business for today, and tomorrow. That’s exactly how this machine feels. Granted, it‘s no small casing, but for the amount of power packed into this chassis, the power-to-size ratio is wild.

Another thing that quickly surprised me is the port offering. There are great DisplayPorts, USB-A and USB-C ports, a disk drive for crying out loud, and other great ports that make this a spectacular machine all around. What‘s awesome too is that the build quality is spectacular, yes, it is a big machine, but it's a big machine that is built to last, and built to be re-built as new components are released, keeping the desktop workstation around for quite some time to come.

Dell Pro Max Tower T2: Design & Build Quality

Dell | Pro Max T2 Tower

(Image credit: Collin Probst // Future )

This desktop has a classic tower design with a. 32L Chassis that offers great cooling, space to expand and change out parts in the future, and it fits the mold of what pro-level users are used to, which is a bigger deal than some may think.

For those who are not necessarily enthusiasts but are just pro-users, they may not care about the fancy new doohickeys, gadgets, and gizmos. They want a machine that will work the way they need it to, every time, without fail or downtime, and they want it to work right away. They don‘t want to have to learn a new system or rebuild their setup.

The form factor helps with that, but so does the port location, the simple DisplayPort out, the IEC power connection, not some proprietary cable, and the all-around business-first focus. It’s simple things like this that help business users.

Beyond the design, the build quality is great. It’s rugged enough that you can get work done without worrying about your machine breaking, and it looks and feels professional enough that it never passes as a gaming machine, keeping this strictly business.

The internals of this blast-from-the-past-looking tower are nothing close to those with which I grew up. It’s rocking an Intel Core Ultra 9 285K with 24 cores, up to 5.7GHz boost, and built-in NPU AI Acceleration. It has an NVIDIA RTX PRO 6000 Blackwell with 96GB, plus a total of 4TB of blazing-fast SSD storage, 128GB of RAM, and a power supply with plenty of headroom to add other components in the future.

This computer is fine-tuned down to the component selection for AI models, training, 8K video editing, large-scale rendering, massive database manipulation, CAD, simulations, and more. This machine is a powerhouse. Plain and simple.

Dell Pro Max Tower T2: In use

Dell | Pro Max T2 Tower

(Image credit: Collin Probst // Future )

I work alongside engineers, those who work with large data warehouses, those who work with AI, those who work in 3D modeling, 4K and 6K video editors, professional photographers, those who run massive visual events, those who run full custom applications, and so on. I was able to work alongside all of those individuals with this computer to see just how powerful the Dell Pro Max T2 Tower truly is.

It is important to note that this is not a gaming PC; those are also highly spec’d, but in different ways. You could upgrade the GPU to a more gaming-focused one to get closer, but right now this machine is built for work, not play.

I'd happily use this machine as my workhorse for serious work. In high-performance roles like data engineering and architecture, tower PCs are common. This machine is spectacular for that. If you already have a monitor and keyboard setup you love, you're just looking for a more powerful engine for your ecosystem. That's exactly what this delivers.

It’s snappy, has great ports, doesn’t slow down, and stays quiet even during benchmarking tests.

Dell Pro Max Tower T2: Final verdict

Dell | Pro Max T2 Tower

(Image credit: Collin Probst // Future )
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future
Dell | Pro Max T2 Tower
Collin Probst // Future

The Dell Pro Max Tower T2 is a powerhouse workstation designed for real productivity. It’s not your everyday gaming PC; it’s more than that. Yes, it’s not the most advanced gaming GPU, but it is among the most powerful for raw performance and processing.

For AI, data models, data-intensive work, massive productivity, and beyond, this will handle it. And thanks to the old-school tower form factor, this machine can be upgraded with other components as you desire, without breaking solder joints or cramming parts in.

In short, this isn’t the PC for most, but for those who know they need incredible power in a Windows machine to handle these kinds of tasks, then this may just be the enterprise-grade machine you’ve been dreaming of.


For more powerful options, we've tested the best business computers and the best mobile workstations.

YouTube Music now limits how many song lyrics you can see on a non-Premium account
6:16 pm |

Author: admin | Category: Mobile phones news | Comments: Off

Google continues to lock down YouTube features as it moves them behind the Premium subscription. First, it disabled background playback loopholes. Now it wants to charge you for song lyrics on YouTube Music. Several posts on the r/YoutubeMusic subreddit show the YouTube Music UI with a warning – “You have X views remaining, unlock lyrics with Premium”, where X starts at 5 and counts down to zero each time you hit the Lyrics tab. YouTube Music now requires a Premium subscription if you want to look at (more than a few) song lyrics This has been in the works for a while now – it...

YouTube Music now limits how many song lyrics you can see on a non-Premium account
6:16 pm |

Author: admin | Category: Mobile phones news | Comments: Off

Google continues to lock down YouTube features as it moves them behind the Premium subscription. First, it disabled background playback loopholes. Now it wants to charge you for song lyrics on YouTube Music. Several posts on the r/YoutubeMusic subreddit show the YouTube Music UI with a warning – “You have X views remaining, unlock lyrics with Premium”, where X starts at 5 and counts down to zero each time you hit the Lyrics tab. YouTube Music now requires a Premium subscription if you want to look at (more than a few) song lyrics This has been in the works for a while now – it...

I spent more than 50 hours smashing through Yakuza Kiwami 3 & Dark Ties, and it’s a solid action-filled remake with significantly improved combat — but it can’t quite compare to its predecessors
6:00 pm |

Author: admin | Category: Computers Gadgets Gaming | Comments: Off

Yakuza Kiwami 3 is a remake of what is perhaps the most divisive game in Ryu Ga Gotoku Studio’s Like A Dragon franchise. It comes with overhauled graphics, refreshed combat, a more fleshed-out narrative, and, of course, a new separate story – dubbed Dark Ties – which follows the path of antagonist Yoshitaka Mine.

Review info

Platform reviewed: PS5
Available on: PS5, PS4, Nintendo Switch 2, Xbox Series X and Series S, PC
Release date: February 11, 2026 (Steam); February 12, 2026 (other platforms)

Having recently gone back to the Yakuza 3 Remastered on PlayStation 4, I can say that Kiwami 3 is a very comprehensive remake, and changes to its visuals, combat, and story certainly feel striking.

But are all of these changes for the better? Does this remake continue the high standard that RGG Studio set with the first 2 Kiwami games? Well, the answer to those questions may not be particularly straightforward.

A Dragon reborn

Kiryu, Haruka, and Izumi together in Yakuza Kiwami 3

(Image credit: Sega)

Let’s start by discussing the main game: Yakuza Kiwami 3. This follows the story of Kazuma Kiryu – also known as the Dragon of Dojima – a former Yakuza and Tojo Clan Chairman. Following the events of Kiwami 2, Kiryu decides to run an orphanage on the island of Okinawa. But it doesn’t take long before he’s embroiled in yet more drama.

His orphanage is under threat, due to it being situated on land that's needed for a government-backed resort plan. The new Tojo Clan chairman is shot by a mysterious figure. And a succession dispute is erupting among the Tojo family patriarchs. The narrative is still gripping, although this revisit does make a couple of changes.

As some fans may already know, there’s been a shake-up to the finale, which is undoubtedly going to ruffle some feathers. I won’t go into details, but in my view, this change isn’t executed very well. It takes some of the emotion and impact away from the original Yakuza 3, causing the game to fall short of the very best RPGs, narrative-wise.

Something else that may reduce the impact of the narrative is the newly added English voice acting. I know I’m far from the only one who’s said this, but some of the English voices are poor, especially that of Kiryu himself. There’s a lack of maturity and gruffness to the protagonist’s voice, meaning his iconic personality doesn’t shine through. As a result, I played through the game in Japanese.

Best bit

Kiryu wins the bug catching contest in Yakuza Kiwami 3

(Image credit: Sega)

One of the highlights for me was playing through the various mini-games at Morning Glory. So when I defeated the grand-champion of bug catching – Mame the dog – I was absolutely over the moon. That pooch puts up one hell of a fight, believe me.

Still, a lot of the other adjustments feel largely positive. For instance, combat feels far better than it did in the original. The new Ryukyu style – which is inspired by Okinawan weapon arts – is brutal and optimized for wiping out swathes of enemies at once. There’s a wide variety of weapons that Kiryu can use in this style, and learning new combos makes it truly devastating.

The Dragon of Dojima style feels excellent too, and perfectly personifies the classic brawler combat Kiryu is known for. You can learn new abilities, including heat action finishers and grabbing techniques – usually, you’ll have to use points earned in battle to do so. Other aspects, like health and strength enhancements, require you to use cash instead. In my opinion, this feels more streamlined and polished than the original upgrade system, and I really enjoyed enhancing my build as the game progressed.

Just generally, combat feels more refined in Kiwami 3. The issue of enemies continually blocking has been significantly improved, battles feel a bit faster-paced, and Kiryu’s movement feels more fluid. I did find that the game was considerably easier than other Yakuza games – at least playing on standard difficulty. As a result, I reduced my use of healing items in battle – but you can select a harder difficulty option instead, if you’d prefer a greater challenge.

Another significant addition is the Lalala Phone, which you can customize to improve Kiryu’s abilities – or just for aesthetic reasons. This is surprisingly fun and provides a real throwback to the late noughties. You can also add friends in Tokyo or Okinawa, and eventually unlock rewards for doing so, giving an actual incentive to use your phone. This has seemingly replaced the original’s Revelations feature, though, which was a source of quirky and often funny cutscenes.

Kiryu gets a new phone in Yakuza Kiwami 3

(Image credit: Sega)

But before I move on to Dark Ties, I want to talk about two other major changes – one that I loved, and one that I was less hot on.

I’ll start with the good: Life At Morning Glory. Here, you can complete a bunch of mini-games, like helping the children with homework, sewing, harvesting crops, and fishing. I was absolutely addicted to these – especially the latter two, as they’re necessary for cooking meals requested by the kids. Cooking is a blast, and it’s really wholesome watching Kiryu bond with the orphans over food. More generally, you see so much more of Kiryu’s relationship with the children in this remake – and although he may be a punch-first, ask-questions-later kind of guy, you get a window into the softer, more sensitive side of him, which is a joy to watch.

Unfortunately, I wasn’t in love with the other major addition, Bad Boy Dragon. In this story, Kiryu becomes chairman of the Haisai Girls and supports them in their aim to protect Okinawa, crush the oppressive Tokyo Night Terrors, and become Japan’s leading girl gang. You’ll fight in turf wars and large-scale battles in order to achieve all of this, and frequently recruit new members along the way.

Personally, I found this part of the adventure to be a little tedious. Fighting in turf wars feels same-y after a little while, and the trope of helping a group of underdogs win against the odds – as seen with Four Shine in Yakuza Kiwami 2 and Real Estate Royale in Yakuza 0 – just felt a little uninspired. The environments you battle through also lack differentiation, making this part of Kiryu’s campaign less compelling than others.

Enter the underworld

Mine and Kanda fist bump in Dark Ties

(Image credit: Sega)

Kiwami 3 definitely adds a lot of good stuff, but not all of its additions work out for the best. But my suspicion is that a lot of players – especially returning fans – will be more interested in the Dark Ties content, which follows Tojo Clan newbie Yoshitaka Mine. Here, you uncover the origins of Mine’s Yakuza career, explore his relationship with the brutish Tsuyoshi Kanda, and explore his desire to learn about genuine human bonds.

This is a shorter style of game, with just three chapters. Dark Ties clocked in at under 8 hours for me after I completed the story, as well as a healthy dollop of side-content. But there’s still plenty of fun to be had.

Firstly, I want to talk about combat. We already gushed about Mine’s moves in our Dark Ties preview, and for good reason. Mine’s shootboxing style is truly vicious and brilliantly reflects his character – especially when you’re using the souped-up Dark Awakening mechanic. But even his normal moveset – made up of Intense knee smashes, rapid-fire jabs, and acrobatic grabs – makes Mine’s new campaign a blast to blitz through. Seriously, I even found myself enjoying random encounters with street thugs.

Mine battles through Hell's Area in Dark Ties

(Image credit: Sega)

I really took a shine to Kanda Damage Control as well. This sees Mine attempt to boost the reputation of his aniki, Kanda – a man who I’d describe as a disgusting pig if I were feeling generous. In order to do this, Mine has to do good deeds around Kamurocho – after which he always claims to be Kanda himself. It never gets old, honestly. These often involve high-octane battles, but sometimes descend into the typical wackiness that Yakuza is loved for. I spent a lot of time with this, and plan to max out Kanda’s rank in the coming days for sure.

But it’s not all sunshine and rainbows. Because the other major part of the game – Hell’s Arena – did not do it for me at all. This is basically a dungeon crawler where you have to avoid death, loot treasure chests, and destroy your enemies with the help of various mercenaries and weapons. In a similar vein to Bad Boy Dragon, the dungeon-crawling in Hell’s Arena can feel tedious, and the setting didn’t feel varied or interesting enough to draw me back in.

Story-telling is pretty good throughout Dark Ties, though. Mine is fixated on Tojo Clan Chairman, Daigo Dojima, and the way that the latter’s men will risk their very lives in order to save their boss. I was engaged with Mine’s pursuit of human connection, his conflicting relationship with Kanda, and his rise through the Tojo Clan, ensuring that Dark Ties felt like a worthwhile addition overall.

The Dragon and the Kirin

Kiryu, Mine, Florist, and Date stand around a table in Yakuza Kiwami 3

(Image credit: Sega)

We’ve spoken in depth about Yakuza Kiwami 3 as well as Dark Ties now, but it’s time to bring them together and look at the package as a whole.

Now, something that has whipped up a lot of discussion online is the graphical quality of the game – especially with regards to Kiwami 3. An update was released during my review, intended to fix “a lighting issue” and “other quality concerns”. This will be available for all players at launch.

Using version 1.11 of the game, I didn’t have some of the lighting issues encountered by other players, and with HDR active and a few tweaks, I had Kiwami 3 looking pretty solid. RGG Studios’ attempt at ‘tropical lighting’ can make some in-game elements appear oversaturated, though. Some street signs, for instance, looked almost too bright, creating quite the contrast against the original’s grittier color palette.

Just generally, I wasn’t bowled over by the visuals across both campaigns, actually. Some of the in-game textures – stuff like cars and walls, say – just look a bit dated, and lacked the sharpness I’d expect from a 2026 release. Sure, you’re still getting an upgrade overall from the remaster of Yakuza 3, and the game’s visuals aren’t ugly or anything – they’re just not especially impressive.

But back to the good stuff. I was really pleased with the performance of Yakuza Kiwami 3 & Dark Ties on PlayStation 5. With 4K visuals and a smooth framerate, you can expect pretty seamless gameplay with very few hiccups.

I was also loving the soundtrack once again. Yakuza always brings together an eclectic mix of aggressive battle music, smooth jazz, and upbeat tracks to suit every mood or setting, and Kiwami 3 & Dark Ties is no different. You can even listen to tunes from other Sega titles, like Rhythm Thief & The Emperor’s Treasure, Persona 3 Reload, and Metaphor: ReFantazio using Kiryu or Mine’s phone, which I adored.

Mine on the phone in Dark Ties

(Image credit: Sega)

But now I want to return to the questions that I posed at the beginning. Are all of the changes made in Yakuza Kiwami 3 for the better? Well, the short answer is no. On the whole, you’re getting an improved experience, with better combat, a shiny new battle style, and boatloads of new content. However, changes to the finale and the slightly tedious Bad Boy Dragon side-story felt less positive.

Does Kiwami 3 maintain the high standards set by its remade predecessors? On the whole, yes. The more streamlined upgrade system, good performance, and quality of life adjustments are most welcome. But I think RGG Studio could’ve made a more visually impressive game. A few other choices – like redesigning a major character named Rikiya and removing Revelations – may also upset some hardcore fans.

With that said, I was a fan of Dark Ties overall, in spite of a couple of flaws. I wouldn’t say that this helps to propel the overall package to the dizzying heights that other entries in the series have reached, though. And ultimately, I feel that Yakuza Kiwami 3 & Dark Ties sit in the ‘good category’, rather than the ‘great’ one.

Should you play Yakuza Kiwami 3 & Dark Ties?:

A man talks to Mine in Dark Ties

(Image credit: Sega)

Play it if...

You’re looking for action-packed combat
The combat in both Yakuza Kiwami 3 and Dark Ties is very enjoyable. Smashing through enemies with the new Ryukyu style with Kiryu or viscerally attacking foes with Mine never gets old. I love using new skills against bitter ex-Yakuza called reapers in Yakuza Kiwami 3 or troublesome opponents in Kanda Damage Control in Dark Ties.

You want to learn more about Mine
Mine is a villain with quite a bit of depth, and Dark Ties is a great way to discover more about him. In this separate story, you’ll learn about the end of his business career and descent into the underworld, and it’s pretty gripping from start to end.

Don't play it if...

You’re a stranger to the series
If you’ve not played a game in the Yakuza series before, I strongly advise against starting with this one. By the time you find Kiryu in Okinawa, you’ve just missed out on too much lore. Go back to Yakuza Kiwami, or even better, Yakuza 0, and work your way up to this one.

You’re expecting amazing next-gen visuals
If you’re looking for a real spectacle to enjoy on your PS5, Xbox Series X, or PC, then Yakuza Kiwami 3 & Dark Ties may not hit the spot. Some textures look a bit dated, and the lighting may not do it for those seeking out a more realistic, natural-looking game.

Accessibility features

There’s a pretty comprehensive set of accessibility features to explore in Yakuza Kiwami 3 & Dark Ties. You can set auto quick-time events, swap the left and right sticks, choose between rapid or hold button controls, and customize the camera to your liking. You can also alter subtitle language and text size, map controls to different buttons, and utilize color vision assistance.

Kanda emrges from the water in Yakuza Kiwami 3

(Image credit: Sega)

How I reviewed Yakuza Kiwami 3 & Dark Ties:

For this review, I spent more than 50 hours playing through Yakuza Kiwami 3 & Dark Ties. During this time, I rolled credits on both Kiryu's and Mine’s campaigns, defeated all of the reapers, and completed the Life At Morning Glory and Bad Boy Dragon storylines.

I played the PS5 version of Yakuza Kiwami 3 & Dark Ties on my Sky Glass Gen 2 TV, which is connected to a Marshall Heston 120 soundbar. On occasion, I dipped into the Yakuza 3 remaster in order to compare performance, graphics, and gameplay.

I’m a long-time fan of the Yakuza series, and recently reviewed the Nintendo Switch 2 versions of Yakuza Kiwami and Yakuza Kiwami 2. More generally, I’m a massive JRPG fan, and have written about titles such as Dragon Quest I & II HD-2D Remake, Raidou Remastered: The Mystery of the Soulless Army, and Trails in the Sky 1st Chapter.

First reviewed February 2026

I’ve tested dozens of robot vacuums, and this model has some of the best carpet cleaning I’ve ever seen
5:16 pm |

Author: admin | Category: Computers Gadgets Home Robot Vacuums Smart Home | Tags: , , | Comments: Off

Roborock Qrevo Curv 2 Pro: two-minute review

The Roborock Qrevo Curv 2 Pro is a premium, feature-rich, hybrid floor-cleaning robot that delivers an impressive 25,000 Pascals of suction – great for lifting fine dust, debris and pet hair from hard floors and even deep-pile carpet. With its ultra-slim profile. retractable LiDAR navigation turret and clever AdaptiLift chassis with omnidirectional wheels, this bot can clean under very low furniture and scale especially tall thresholds.

Those 'AdaptiLift' stilts also enable this robot vacuum to hover at exactly the right height over thick carpet and rugs. In practice, this worked extremely well – the Curv 2 Pro offers some of the very best carpet cleaning performance I've experienced.

While the Qrevo Curv 2 Pro's navigation is robust and reliable (it uses a combination of lasers and an RGB camera), its Reactive AI obstacle avoidance isn't quite up to the accurate standards of some of its premium stablemates.

Given that this is a hybrid robot, it comes with a dual-spinning mop system that exerts 12 Newtons of downward pressure for tackling everyday messes though it will struggle with liquid spills and some ingrained stains. These mops also automatically detach or lift up whenever the bot is on carpet or crossing a rug.

The chunky, curvy look of Roborock's newly updated Hygiene+ 3.0 docking system may not be to everyone's liking but there's no doubting its efficiency at maintaining the robot on a daily basis. Like most of today's hybrid models, the dock charges the bot after every cleaning session, automatically empties the contents of the robot's diminutive bin into the dock's large 2.7-liter dust bag, and washes the robot's two spinning mop pads with hot water before wafting hot air over them to prevent smells and mould. In other words, it's mostly hands free.

Overall, the Qrevo Curv 2 Pro is an exceptionally capable everyday floor cleaning solution that offers excellent suction, intelligent navigation and a highly self-sufficient dock. Granted, it doesn't have the best obstacle avoidance I've ever encountered, but for everyday household cleaning of both hard floors and especially carpet, it's an efficient workhorse that shouldn't let you down.

Roborock Qrevo Curv 2 Pro robot vacuum in reviewer's home

(Image credit: Future)

Roborock Qrevo Curv 2 Pro review: price & availability

  • List price: €899 (about $1,060 / £780 / AU$1,520)
  • Available: Europe and Asia – US, UK and AU to follow
  • Launched: September 2025

The Roborock Qrevo Curv 2 Pro sits toward the premium end of the robot vacuum spectrum and generally delivers solid value for money, if your priorities are advanced automation and cleaning performance. High-end features like expert LiDAR-based mapping and decent obstacle avoidance justify the price for users who want a mostly set-and-forget cleaning solution rather than a basic scheduled robot.

That said, there are similar robots at lower cost that may suit some households just as well. For instance, in the UK the standard Roborock Qrevo S5V with a decent 12,000Pa of suction power, self-cleaning dock and similar mopping system retails at a smidge under £500 for the black model and £425 for the white. Or, for just £549, the excellent Dreame L40 Ultra with 19,000Pa is an equally good bet.

No question, the Qrevo Curv 2 Pro offers very decent value for those who want maximum convenience and features (including AdaptiLift), but there are some less expensive robots out there that are on a par for typical floor cleaning tasks.

As of writing, the Roborock Qrevo Curv 2 Pro is only available in select territories, including most of Europe (where it's selling for around €899) and some Asian and Middle East countries. The rest of the world, including the USA, UK, Canada and Australia, will see staggered launches throughout 2026.

  • Value for money score: 4 out of 5

Roborock Qrevo Curv 2 Pro specs

Max suction:

25,000Pa

Robot diameter:

13.8 x 13.9in / 35 x 35.2cm

Robot height:

3.1 in / 8cm

Dock dimensions (W x D x H):

17.7 x 17.7 x 17.7 in / 45 x 45 x 45cm

Mop type:

Dual spinning discs

Max threshold clearance: 

1.6 in / 4cm (double-layer)

Dust bin volume (base):

2.7L

Water tank volume:

3.2L (clean), 3L (dirty)

Base functions:

Charge, empty dust, wash mop pads with hot water, dry mop pads with hot air, self-clean

Roborock Qrevo Curv 2 Pro review: design

  • Excellent suction power, with split rollers to avoid hair tangle
  • Retractable LiDAR puck and 'AdaptiLift' legs for deep carpet and tall thresholds
  • Large but fully-featured cleaning dock

As I mentioned in my review of the Roborock Q5 Pro+ in March 2025, there's a proliferation of robot vacuum brands on the market right now, each with a huge roster of models. This makes it a challenge for any journalist writing about a specific robot vacuum cleaner that is, in many ways, very similar to other models on the market, and it must be even more confusing for the consumer when faced with so many options.

Take Roborock, for instance. There are currently five different models in its Saros range, five in the Qrevo Curv Series, eight in the standard Qrevo range, five in the S Series, four in the Qrevo Edge Series and seven models in the lower-priced Q Series. And that's without even having a sniff at all the other brands like Dreame, Ecovacs, Eufy, Narwal, EZVIZ, Switchbot and iRobot. It seems that the world is awash in robot vacs at the moment and the same thing is already beginning to happen with robot lawn mowers.

But I digress – let's look at the Qrevo Curv 2 Pro in more detail and see if it's as good as the myriad of other premium models I've reviewed from the Roborock stable.

Robot vacuum design

On the surface, Roborock's Qrevo Curv 2 Pro adopts the same design principles as many other premium robot vacuum cleaners. The robot itself – 13.8 in / 35cm in diameter – is circular in shape with a centrally-located roller brush, an expandable side sweeping brush for edge and corner cleaning, two circular mops that are automatically ejected in the dock or raised whenever the robot is working on or crossing over carpet, a LiDAR turret for expert navigation, plus a full gamut of other navigational and obstacle avoidance aids. The Full Monty, in other words.

Roborock Qrevo Curv 2 Pro robot vacuum in reviewer's home

(Image credit: Future)

As one might expect from a renowned manufacturer like Roborock, build quality is exceptional throughout and well up there with the best in premium robot vacs. I've reviewed many Roborock products over the years and have never once experienced any issues aside from the odd clogging of a dust bag or some cotton tangled around a spindle. In the main, they have all performed reliably and efficiently. As a consequence, Roborock is the brand I always recommend whenever asked.

Given the popularity of Roborock's retractable LiDAR turrets that allow many models from its current roster to venture beneath low-slung furnishings, it's no surprise that Roborock has opted to fit the same RetractSense system to this particular model. As a result, when the Qrevo Curv 2 Pro's turret is retracted, the height of the robot measures a squat 3.14in / 7.98cm.

That means it can scuttle under most wardrobes, TV stands and low sofas as long as there's a minimum of 3in / 8cm of clearance. This is a major boon for anyone who has struggled to clean such inaccessible areas using a standard stick vac, especially one that isn't equipped with a Shark-inspired bendy suction tube.

Roborock Qrevo Curv 2 Pro robot vacuum in reviewer's home

(Image credit: Future)

The Qrevo Curv 2 Pro uses the aforementioned tried-and-trusted LiDAR system for its primary navigation, a VertiBeam lateral laser system for accurate edge cleaning around furniture, an upward-facing Range Finder for measuring overhead clearance, a top contact sensor to prevent the robot from jamming itself and, importantly, a combination of 'structured light' and a front-facing RGB camera with LED light for expert obstacle avoidance in all lighting conditions.

According to Roborock the Qrevo Curv 2 Pro can recognise over 200 objects, 'from tangled cables to pet surprises' but presumably only when the 'Pet' switch in the app is activated. Incidentally, the Pet setting also ensures that the robot's brush roller stops working the moment the sensors detect a furry friend.

While I personally prefer the idea of a dual counter-rotating brush head system as introduced by iRobot, Roborock has quite recently started fitting some of its bots with single split rubber brushes that meet with a small gap in the centre, and that's the case with this model. According to Roborock, the so-called 'DuoDivide' layout helps deal with hair tangles by moving the hair towards the suction gap in the middle to prevent it from getting tangled around the roller's spindles. I vouch that this system works very well and I have no issues to report regarding pet hair tangles.

Roborock Qrevo Curv 2 Pro robot vacuum in reviewer's home

(Image credit: Future)

However, as mentioned in my article on overdue robot innovations I want to see, I really do wish robot manufacturers would adopt D-shaped bodies to their products, because the circular ones of norm require fitting a short 6.3in / 16cm roller brush between the robot's wheels, which leaves as much as 3.5in / 9cm of unused space on either side of the roller.

I cite iRobot's very early S9+ as an example. This D-shaped robot came onto the market in 2019 and featured a long 9in / 23cm rubber roller positioned near the front, almost across the entire width of the machine. This meant it was not only better at collecting dust along edges, but it also picked up a wider band of detritus with every sweep. Perhaps there's a valid technical reason why the vast majority of robot vacs are circular, so answers on a postcard please.

Roborock Qrevo Curv 2 Pro cleaning a thick, cream carpet

(Image credit: Future)

Let's look at this bot's suction power, because suction strength is one of the only differences between the Qrevo Curv 2 Pro and its sibling, the Qrevo CurvX. Where the Roborock S8 MaxV Ultra TechRadar reviewed in July 2024 featured a then 'industry-leading' 10,000 Pascals of suction power, this one hits the 25,000Pa mark; 3,000Pa more than the Qrevo CurvX. Mind, even this lofty stat is still 5,000Pa shy of the Dreame Matrix10 Ultra I recently reviewed, but it just goes to show how fast robot vacuum technology has advanced in such a short space of time. For the record, the Qrevo Curv 2 Pro offers five levels of suction, from quiet to MAX+.

Given that this robot is of the hybrid variety, it also comes with a full mopping system comprised of twin spinning mops on the rear, with the ability to extend the mop on one side for cleaning around furniture legs and in corners. These mops are only used for hard floor cleaning and are therefore either raised when the robot is crossing carpet or rugs, or left behind in the dock if the robot is only performing a vacuum task. Like all decent mopping bots, the Qrevo Curv 2 Pro's mops are given a thorough wash and dry after each working session, and you can read more about this in the Dock Design chapter directly below.

Roborock Qrevo Curv 2 Pro cleaning a spillage from a hard floor

(Image credit: Future)

Finally, those with single or double thresholds up to 1.6in / 4cm in height will be thrilled to learn that the Qrevo Curv 2 Pro has been fitted with Roborock's clever AdaptiLift technology. Rather than relying on fixed-height wheels like traditional robot vacuums, AdaptiLift gives the Qrevo Curv 2 Pro the ability to dynamically raise and lower its chassis and wheels to adapt to complex floor environments.

The robot's two articulated wheels literally allow the robot to automatically lift and tilt its body to clear high thresholds and even maintain optimal brush and suction contact across different floor types, including carpets with up to 1.2in / 3cm of pile. It also helps free the robot when encountering an obstruction. By intelligently sensing floor transitions and responding in real time, AdaptiLift reduces the need for manual intervention while expanding the robot's practical reach within a home. What's not to like?

Dock design

Roborock's Qrevo Curv series is defined by the curvature of its newly updated Hygiene+ 3.0 dock design. Available only in white, this rounded design aesthetic differs from the rectangular norm and looks shiny, minimalist and, dare I say, rather swish when installed in a modern home. However, its rotund shape may not be to everyone's taste.

Roborock Qrevo Curv 2 Pro robot vacuum in reviewer's home

(Image credit: Future)

Like the majority of robot docks, this one charges the robot after every task (it takes approximately 3 to 4 hours to charge from 0%) as well as emptying the contents of the robot's small 270ml bin into the dock's much larger 2.7-liter dust bag. If you don't have pets, expect about a month or so to pass before the dust bag is full and ready for disposal. However, if you have hairy pets like me, then be prepared to fit a new bag every couple of weeks or so. To save on the cost of extra bags, I often remove the hair and muck in the bag using a pair of long-nose pliers. It's messy, yes, but it saves money in the long run.

Roborock Qrevo Curv 2 Pro robot vacuum in reviewer's home

(Image credit: Future)

Given that this robot also mops hard floors, the mops always go through a thorough cleaning regime in the dock after every cleaning session. This involves scrubbing them using water at 212F / 100C followed by a 122F / 50C hot-air drying session to prevent mould and nasty odours. All you have to do is occasionally fill the dock's 3.2-liter reservoir with fresh water and dispose of the contents in the 3-liter dirty water tank.

Various levels of moisture can be added to the mops depending on the type of flooring you have. Simply go to the Roborock app and select the level of moisture required – for vinyl flooring I would suggest a higher level, and for wooden flooring I'd opt for one of the various levels well below the midway mark. This is especially pertinent for thin laminated flooring which can easily warp if too damp.

  • Design score: 4 out of 5

Roborock Qrevo Curv 2 Pro review: performance

  • Exemplary carpet cleaning performance
  • Acceptable mopping performance
  • Slightly disappointing obstacle avoidance

I have no major anomalies to report regarding this bot's navigation which is generally very good, though it might take the long way round to get to its place of work rather than a direct path. I've noticed a lot of robot vacs do this but then I've also noticed that some models, specifically those from Roborock, appear to learn over time and eventually take the shorter, direct route. I would expect this model to start doing the same over the next few weeks.

While the Qrevo Curv 2 Pro's first mapping run of my open-plan area was a success, it didn't initially name the rooms in my home as accurately as the Dreame Matrix10 Ultra. While it correctly named the kitchen, it treated the open-plan lounge and dining area as one large room and called it the sunroom. It also named the hallway as the living room and the hall passage as a bedroom. By comparison, the Matrix10 Ultra not only named every room correctly, but all areas were divided correctly, too.

Roborock Qrevo Curv 2 Pro returning to its dock, with a dog asleep in the backgroun

(Image credit: Future)

Mind, this slight hiccup in the Qrevo Curv 2 Pro's room recognition was easily rectified by using the Roborock app to divide, merge and rename all rooms correctly. The key takeaway here is that this bot has never not found its charging dock, has never got lost under a sofa and has never stranded itself under the dining table. Every cleaning task has generally gone without any navigational hitches, and that's all you need to know.

Obstacle avoidance

For my obstacle avoidance test I laid out an assault course of dog toys, including two small items to replicate the size of average dog waste. While the robot deftly avoided the larger obstacles over two inches in height, it twice ran over one of the smaller items, a one-inch tall nylon bone. In the Qrevo Curv 2 Pro's defence, this item often flummoxes robots though I'll admit that I was surprised that the Curv 2 Pro didn't avoid it given the Roborock website's poo-dodging claim.

Roborock Qrevo Curv 2 Pro avoiding obstacles including a wire and dog toys, on a patterned rug
Future
Roborock Qrevo Curv 2 Pro avoiding obstacles including a wire and dog toys, on a patterned rug
Future
Roborock Qrevo Curv 2 Pro avoiding obstacles including a wire and dog toys, on a patterned rug
Future

I then added a phone cable to the mix and, despite adjustments in the app, I was surprised to see the robot run over the cable on three separate occasions, even wrapping the cable around the brush head in one instance. This one really surprised me so I checked the multitude of parameters in the app – I had 'Pet' selected for extra overall sensitivity – and I couldn't see any conflicting settings. The upshot is that, while I consider this model's obstacle avoidance to be generally acceptable, I wouldn't rely on it to avoid all clutter in the home. More importantly, I would never rely on it to avoid dog mess of any shape or form.

Vacuum performance

Roborock has been marketing this bot as one of the best for carpet cleaning and, on evidence of my test using oats, muesli and crushed biscuits, I'd say the claim is spot on. I was blown away by how well it tackled the test.

I admittedly selected two passes in the app and MAX+ mode for 25,000Pa of suction, but I needn't have bothered going that far because pass number one was enough to remove the vast majority of detritus. That's an exceptional result, and one of the best I've seen for carpet pickup. I also tried it on a thick pile carpet upstairs and was equally impressed that it a) it managed to collect a sprinkling of oats and b) it didn't get bogged down in the pile.

Roborock Qrevo Curv 2 Pro on a patterned carpet rug, with oats and crumbs sprinkled in front of it
The carpet rug before the vacuuming testFuture
Roborock Qrevo Curv 2 Pro in the process of clearing oats and crumbs from a patterned carpet rug
... during the test...Future
Roborock Qrevo Curv 2 Pro on a patterned carpet rug, with no oats or crumbs remaining after the vacuuming test
... and the results afterwardsFuture
Roborock Qrevo Curv 2 Pro on a patterned carpet rug, with its onboard bin open to reveal oats and crumbs that it has just sucked up
The contents of the bin following the testFuture

For the hard floor test, I used the same ingredients but changed the suction one level down to Max. I was generally very pleased with the results though, as is often the case with robots, the edges weren't completely cleaned and some of the debris was scattered by the robot's spinning side brush – which just goes to show why having a cordless stick vac to hand is always advisable.

Roborock Qrevo Curv 2 Pro robot vacuum before the suction test on hard flooring
The Qrevo Curv 2 Pro before the suction test on hard flooring...Future
Roborock Qrevo Curv 2 Pro robot vacuum during the suction test on hard flooring
... during the test...Future
Roborock Qrevo Curv 2 Pro robot vacuum after the suction test on hard flooring
... and the results afterwardsFuture
Remains of oats and crumbs in the corner of a room following the suction test on hard flooring
As with many bots, the Curv 2 Pro didn't do a perfect job of the cornersFuture

Mopping performance

In terms of its bi-weekly mopping ability, I've been impressed by the Qrevo Curv 2 Pro's overall performance. It has dealt with light stains and general footfall marks very well, including regularly extending one of its articulated mopping pads when traveling along skirting boards, in corners and around chair and table legs.

However, there's only so much one can ask of a twin-pad mopping system like this because, unlike some roller-based models which rinse the roller while it's cleaning, the pads on this aren't cleaned during the mopping task. And that means that any gunk that appears to have been cleaned off the floor actually remains on the mops – which is then spread around the rest of the floor. It's the nature of the beast, which is why it's never advisable to let a robot with spinning pads loose on a large-ish liquid spill.

To prove this, I created a small 'zone' in my kitchen, squirted some tomato ketchup over my wooden floor and commanded the Qrevo Curv 2 Pro to go and clean it up, having set the mop moisture setting to medium. On initial evidence it did a fine job at removing the mess, though it did leave one small smear behind. However, on closer inspection in the right reflective lighting, I could clearly see some clear but slimy swirls on the floor which would invariably dry, leaving a tacky residue behind.

Roborock Qrevo Curv 2 Pro cleaning a spillage from a hard floor
Before the mopping test...Future
Roborock Qrevo Curv 2 Pro cleaning a spillage from a hard floor
...during... Future
Roborock Qrevo Curv 2 Pro cleaning a spillage from a hard floor
... and the results afterwardsFuture
Roborock Qrevo Curv 2 Pro cleaning a spillage from a hard floor
Another look at the mopping resultsFuture

Had I not had the excellent Roborock F25 Ultra to hand to completely finish the job, I would have had to reach for the good old mop and bucket to fully remove all residue. This is no slight on the Qrevo Curv 2 Pro since all mopping robots of this nature behave the same way. You just need to choose your battles carefully.

Dock performance

While I don't mind the look of the Qrevo Curv 2 Pro's dock, it's not a patch on its stylish stablemates, the Roborock Saros 10 and 10R, which both come with black mirrored docks that meld into the background of any room. By contrast, this one is larger in appearance and much more noticeable.

From an operational point of view, the dock itself has proved faultless over the past few weeks with no anomalies to report. Yes, the bin emptying process is quite noisy but it's been powerful enough to always empty the robot's bins even when packed with dog hair. It has also washed and maintained the mops very well leaving no residue behind.

Roborock Qrevo Curv 2 Pro dock

(Image credit: Future)

Is there anything negative to report about the dock? Well I'm not keen on the design of the dock's dust bag container, since its deep and narrow, downward-facing chamber entails having the dust bag hang and bend at the top where it connects with the inlet. When filled with detritus, the weight of it could feasibly cut off airflow into the bag. I should add that I haven't had any issue to date with the emptying process but I still maintain that it's an odd design that appears to go against simple physics. But what do I know?

  • Performance score: 4 out of 5

Roborock Qrevo Curv 2 Pro review: app

  • Exceedingly comprehensive
  • Well laid out
  • Easy to use

The Roborock app is an essential companion that elevates the Qrevo Curv 2 Pro's overall cleaning experience from the moment you open it. Cleanly designed and intuitively laid out, this app makes both initial setup and day-to-day control extremely straightforward, whether you're a first-time robot vacuum owner or a seasoned user who requires a plethora of customization options.

Screenshots from the Roborock companion app
Roborock / Future
Screenshots from the Roborock companion app
Roborock / Future

Mapping is mostly accurate, with detailed floor plans that are highly editable, allowing you to label rooms, set no-go zones, define virtual walls and customize cleaning routines with surprising precision. Moreover, the ability to adjust suction power, mopping intensity and cleaning sequences on a per-room basis gives users a level of control that few competitors can match, Dreame notwithstanding.

The Roborock app also supports a raft of scheduling options, self-created routines and multi-level home management, making it easy to tailor cleaning to your lifestyle. Combined with its stable connectivity and regular firmware updates, this app feels genuinely mature and thoughtfully engineered. Which is why it's still my favorite robot app of all.

  • App score: 4.5 out of 5

Roborock Qrevo Curv 2 Pro review: scorecard

Attribute

Notes

Rating

Value

A premium robovac (although a step below most flagship models). Advanced specs and features justify the price tag.

4 / 5

Design

Sleek, ultra-slim profile and packed with features. Dock is comprehensive but quite chunky.

4 / 5

Performance

Excellent vacuuming and especially impressive on carpet. Mopping very acceptable but obstacle avoidance a bit underwhelming.

4 / 5

App

The Roborock app is the gold standard for design and features.

4.5 / 5

How I tested the Roborock Qrevo Curv 2 Pro

With so many similarly-specced robot vacs on the market, it's becoming quite difficult to detect the differences between them. But in this day and age, specs mean nothing if the bot doesn't perform to the high standards that TechRadar's writers expect.

We always strive to get the best out of the products we review and always push them to the limits of their functionality. In this case I tested the robot vac on different floor types, watched it navigate a room, set up an obstacle course and put it to four performance tests – carpet vacuuming, hard floor vacuuming, general mopping and messy mopping. Half points out of five are then awarded for each category and averaged out for a final score. Five stars are only given to a product that unequivocally impresses on all fronts but four-stars products, too, are absolutely worth investigation.

Read more about how we test robot vacuum cleaners

  • First reviewed February 2026
Sony: “no change in status” for Xperia phones, Xperia 1 VIII and 10 VIII found in IMEI database
5:13 pm |

Author: admin | Category: Mobile phones news | Tags: | Comments: Off

Xperia fans may have been biting their nails after Sony put its prestigious Bravia TV brand under TCL control, but during the recent earnings call Sony Corporate Executive Officer and CFO Lin Tao said that there will be “no change in status” for the Xperia phones. Further, Japanese site S-Max did some digging and discovered the model names for the Sony Xperia 1 VIII and Xperia 10 VIII in the GSMA IMEI database. These models go in sequence, e.g. the Xperia 1 VII and 10 VII were the PM-150X-BV and PM-151X-BV, respectively (X is a digit denoting regional variants). Sony Xperia 1 VIII...

I wore the Amazfit T-Rex 3 Pro for a month, and at half the price of an Apple Watch Ultra 3, it gets top marks for value
4:17 pm |

Author: admin | Category: Computers Gadgets Health & Fitness Smartwatches | Tags: , , | Comments: Off

Amazfit T-Rex 3 Pro: One minute review

Amazfit has been on a hot streak recently. Fresh off the release of the Bip 6 and Active 2, the company has now released the latest version of its most capable outdoor watch, the Amazfit T-Rex 3 Pro. The watch is showcased by the super successful ultrarunner and official commercial partner Ruth Croft, who says that Amazfit “gives her the tools she needs without getting in the way of the run."

The Amazfit T-Rex 3 Pro is pitched as a value alternative to premium rugged watches like the Garmin Fenix 8 and Apple Watch Ultra 3. While it costs significantly less, it packs very competitive hardware, making it a compelling option for outdoor athletes and budget-conscious consumers.

With a military-grade (MIL-STD-810H) rating, a titanium bezel, and sapphire crystal glass, the T-Rex 3 Pro is seriously rugged, built to withstand extreme temperatures and is 10 ATM water-resistant, certified for scuba diving up to 45 meters. In addition to its already excellent diving features, the T-Rex 3 Pro has a dedicated dive computer mode like the Garmin Fenix 8 and Apple Watch Ultra 3.

The 1.5-inch AMOLED display is also impressively specced, with 3,000 nits of peak brightness to compete with the latest crop of Apple Watches. Beyond that, the watch offers up to 25 days of typical use on a single charge, a very good feat considering Garmin’s battery lives have been creeping downwards. When tracking outdoor activities, it still delivers up to 38 hours of continuous, high-accuracy dual-band GPS (which connects to six satellite systems). This endurance sets it apart and makes it ideal for multi-day treks or ultra-races.

The main trade-off is the software. It runs on Amazfit's proprietary Zepp OS. While Zepp OS is smooth, fast, and feature-rich for health and fitness tracking, it operates on a closed ecosystem. This means there are no major third-party apps, including Spotify, Google Maps, or Strava. There's a lot to commend the T-Rex 3 Pro, but this lack of integration is its most egregious downside.

Amazfit T-Rex 3 Pro

(Image credit: Future / Paul Hatton)

Amazfit T-Rex 3 Pro: Price and availability

  • $399 USD / £399 UK / $600 AUS
  • Incredibly affordable given its rugged qualities
  • Cellular connectivity will require upgrading to a more expensive smartwatch

At sub-$400 / £400 / $600 AUS, the T-Rex 3 Pro is an incredibly affordable alternative to the more expensive Garmin Fenix 8 and Apple Watch Ultra 3 (the Ultra 3 costs $799 in the US, so the T-Rex 3 Pro is fully half the price). It’s missing a number of features, including ECG support, crash detection, third-party apps and other integrations. If you’re not concerned about this, then the T-Rex 3 Pro delivers an awful lot of smartwatch for not a lot of money.

Value score 5/5

Amazfit T-Rex 3 Pro: Design

  • Rugged and premium build
  • High-end AMOLED display
  • Two size options

The Amazfit T-Rex 3 Pro is a rugged and outdoors-focused smartwatch that embraces a deliberately chunky and robust aesthetic. You could even call it a delightful homage to the classic digital sports watch, the Casio G-Shock.

The overall design aesthetic is probably more reminiscent of the Garmin Fenix 8 series, with both watches boasting circular, rugged designs and a blend of physical buttons (four on the Amazfit, five on the Garmin) and touchscreen operation. Personally I don't think you can beat the tactile experience of physical buttons.

The fiber-reinforced polymer case is combined with a Grade 5 titanium bezel and buttons for a tough yet lightweight construction. The case contains a high-resolution 1.5-inch AMOLED display that is capable of an impressive 3,000 nits. As a result, I had absolutely no problems using it out in direct sunlight. The display is inset slightly and protected by scratch-resistant sapphire glass.

Amazfit T-Rex 3 Pro

(Image credit: Future / Paul Hatton)

In addition to everything you'd expect from a typical smartwatch, the T-Rex 3 Pro features a built-in LED flashlight located at the top of the case, just like the best Garmin watches. This offers adjustable brightness and a dual-color mode, with the red light designed to preserve night vision during camping or late-night navigation.

While the T-Rex line used to be one-size-fits-all, and that size was huge, the Pro 3 introduces a second option. As a result, you can now choose from the original 48mm model (tested and photographed) and a more compact alternative 44mm model. The latter retains the rugged titanium/polymer build but fits much better on smaller wrists or under jacket sleeves.

Design Score: 4/5

Amazfit T-Rex 3 Pro: Features

  • 180 sports modes including skiing
  • 10ATM water resistance
  • NFC enabled

The Amazfit T-Rex 3 Pro offers an extensive set of features covering over 180 sports but with a distinct leaning towards more adventurous activities, including skiing and snowshoeing. The ski mapping feature enables users to find their nearest ski resort and navigate with detailed maps. According to Amazfit, these maps include "cable cars, color-coded slopes, and clear route guidance for groomed runs as well as off-piste, backcountry, or telemark routes."

While taking part in icy-cold endeavors you'll be glad to know that the T-Rex 3 Pro is resistant to temperatures as low as -40℃ and includes a smart Low Temperature Mode that keeps vital software functions of the watch operational in environments as cold as -30℃.

Amazfit T-Rex 3 Pro

(Image credit: Future / Paul Hatton)

If you're planning on showing the water who's boss, then the 10 ATM water-resistance capabilities will come in handy. That means the watch is certified for diving to a depth of 45m and therefore ready for all your freediving and scuba diving excursions.

Tracking is taken care of by the new BioTracker sensor that delivers highly accurate heart-rate tracking even in challenging outdoor conditions. For pro-grade precision, the watch can also be paired with an Amazfit Helio Strap.

When you fancy a coffee or high-protein shake while on the slopes or on a long run, the inclusion of Zepp Pay takes advantage of NFC technology so you don't need to go rifling through your stuff in search of your phone or bank card. Up to eight bank cards can be stored with password-protected contactless payment, keeping your transactions secure.

Features Score: 4/5

Amazfit T-Rex 3 Pro: Performance

  • Excellent health and activity tracking
  • Fantastic battery life
  • Poorly implemented AI assistant

The T-Rex 3 Pro performs well when it comes to health and fitness tracking. I tested it alongside the more expensive and trusted Huawei Watch Ultimate 2 and found it reported very similar health metrics, including measuring heart rate to within a single beat. It also measured the same 96 percent reading for blood oxygen, which is very impressive considering the Watch Ultimate 2 features a dedicated X-Tap sensor for accurate readings.

I used my normal cycle route to test the GPS accuracy of the T-Rex Pro. This route includes both rural and built-up environments, which makes it an ideal test for GPS performance. GPS locking was almost instant, even when still in my house. GPS lock was maintained throughout the 4km ride, with no dropouts experienced. I compared the distance on both the Huawei Watch Ultimate 2 and onthegomap.com and found that the watch was within an impressive 50m of both, a statistically insignificant 1.25% difference.

The watch also delivers exceptional battery performance, lasting 9 to 10 days in my testing even with the Always-On Display and continuous health tracking active, which would qualify as ‘heavy use’. For those prioritizing longevity, disabling the AOD stretches performance to nearly 3 weeks. During high-accuracy GPS tracking, the battery proves its rugged credentials by draining only about 3% per hour, making it a reliable companion for multi-day adventures.

Amazfit T-Rex 3 Pro

(Image credit: Future / Paul Hatton)

I’ve tested a few Amazfit watches now but haven’t yet delved deep into the Zepp Flow AI functionality. Getting hold of the T-Rex 3 Pro provided the ideal opportunity to change that. Zepp Flow is a conversational AI assistant and one of the first tools of its kind for smartwatches. I’ve always found navigating through smartwatch menus a bit laborious, and so I was eager to see if Amazfit was able to deliver a more intuitive hands-free experience.

After checking online for some of the commonly accepted commands, I began by saying, “I want to go for a run.” Zepp Flow recognised my words perfectly and immediately launched the run activity. There was no need to select “Go” as the activity began straight away. With my impressed face on, I then asked Zepp Flow if it will rain this afternoon. The watch responded with “I cannot provide weather information for past times” even though it was only 1.30pm.

A little more unsure than I was after launching the run activity, I set about seeing if Zepp Flow could help me access the watch’s smart features. I therefore gave the device access to my contacts and asked it to call my wife. Unfortunately, it kept thinking that I was saying Hutton rather than Hatton. I understand that these misunderstandings can happen, but rather than asking me to say it again or “Did you mean Hutton” it just stopped listening, end of conversation.

I find that if my experience of an AI assistant stutters a few times, then I quickly stop using it, and that was very much the case with Zepp Flow. Alongside a lack of third-party apps, I was left a little disappointed by the limited smartwatch features on offer.

Performance score: 4/5

Amazfit T-Rex 3 Pro

(Image credit: Future / Paul Hatton)

Amazfit T-Rex 3 Pro: Scorecard

Category

Comment

Score

Value

At this price point it doesn’t get much better than this.

5/5

Design

A solid titanium-built case featuring a 3,000-nit display and pro-dive durability.

4/5

Features

A set of impressive features aimed at outdoor enthusiasts and adventurers.

4/5

Performance

Highly accurate health and fitness tracking, but Zepp Flow lets the watch down.

4/5

Amazfit T-Rex 3 Pro

(Image credit: Future / Paul Hatton)

Amazfit T-Rex 3 Pro: Should I buy?

Buy it if...

You want a rugged build and great battery life on a budget

At sub-$400/£400, the T-Rex 3 Pro offers a very impressive set of specs.

Specialized outdoor and safety utilities

With advanced navigation, a built-in speaker and microphone, and an integrated flashlight, you'll have everything you need when you need it most.

Don't buy it if...

You need cellular connectivity (LTE)

For that you’ll need to upgrade to something like the Garmin Fenix 8.

You rely on third-party app integration

As is the case with all Amazfit watches, you won’t find the likes of Spotify, Google Maps, or WhatsApp.

Also consider

Garmin Fenix 8

This is the ultimate watch for adventure enthusiasts, with a smorgasbord of hardware and software features and a battery that lasts for weeks.

Read our full Garmin Fenix 8 reviewView Deal

Apple Watch Ultra 3

A powerhouse of a wearable, adding 5G, satellite connectivity and new screen technology to an already-winning formula. The Low Power Mode can stretch its runtime to a remarkable 72 hours, and its fitness metrics are accurate against a leading chest-mounted heart rate monitor. 

Read our full Apple Watch Ultra 3 reviewView Deal

How I tested

During my month-long testing of the T-Rex 3 Pro, I took part in a range of different activities, including cycling, running, football, aerobics, and more. Unfortunately I didn’t have a skiing holiday planned during the testing phase, so I wasn’t able to try out the dedicated skiing features. There were plenty of other features to keep me occupied, though, including health tracking, water resistance, Zepp Flow, messaging, and battery life.

First reviewed: February 2026

Lenovo teases its upcoming Y700 gaming tablet, some leaks also emerge
3:46 pm |

Author: admin | Category: Mobile phones news | Comments: Off

Lenovo is expected to announce the 5th-generation Lenovo Y700 gaming tablet next month and the company started teasing the device on Weibo. The teaser was quickly followed by a tip from Digital Chat Station, revealing more details. Lenovo Y700 (Gen 5) The official posters on Weibo confirm an 8.8-inch display with a 3040 x 1904px resolution, 165Hz refresh rate, 2640Hz touch sampling rate for faster response during gaming, 800 nits maximum brightness, and 12-bit color depth. This will likely be the same display as last year's model. And even though the poster doesn't say...

Lenovo teases its upcoming Y700 gaming tablet, some leaks also emerge
3:46 pm |

Author: admin | Category: Mobile phones news | Comments: Off

Lenovo is expected to announce the 5th-generation Lenovo Y700 gaming tablet next month and the company started teasing the device on Weibo. The teaser was quickly followed by a tip from Digital Chat Station, revealing more details. Lenovo Y700 (Gen 5) The official posters on Weibo confirm an 8.8-inch display with a 3040 x 1904px resolution, 165Hz refresh rate, 2640Hz touch sampling rate for faster response during gaming, 800 nits maximum brightness, and 12-bit color depth. This will likely be the same display as last year's model. And even though the poster doesn't say...

« Previous PageNext Page »