Gadgets - Organizer

iRobot Roomba Combo Essential robot vacuum review

7:46 pm | November 22, 2024

Roomba Combo Essential: two-minute review

The Roomba Combo Essential is a basic, budget robot vacuum that's designed to be effective, yet simple to use. iRobot bills it as a good choice for recent graduates, new homeowners, or anyone unfamiliar with the world of robot cleaners, while also being a worthy replacement for the Roomba 600 Series – an ultra-popular budget range that launched in 2012 and which is no longer available to buy. I put it the Combo Essential to the test, and while I've found that it can't begin to compete with the very best robot vacuums on the market, it compares pretty well to today's best cheap robovacs.

It arrives with a list price of just $274.99 / £269 / AU$499, but the current Black Friday deals mean it can be picked up for much less. Regardless, even for its listed price, the Roomba Combo feels well made and good quality, and for cleaning performance it's solid, too. The bot tackled light vacuum cleaning without issue, and when bumped up to Max suction mode it cleared both small and large debris tests pretty effectively. Even more impressive was the mopping facility – which proved more efficient than other, far pricier robovacs I've tested.

When it comes to customization options, you're limited: essentially, you can pick from three suction levels and three water levels; choose either a vacuum-only or combination vac-mop run; and opt for either a spot clean or a whole-home clean. More advanced alternatives will let you clean a room or area, and auto-adjust suction when moving from hard floor to carpet, for example. The lack of No-Go Zone option means you'll also need to manually block off any soft flooring areas when running a combination vac-mop run, or you better believe it will attempt to mop those carpets for you.

Mapping, too, is basic – I'd politely describe the general behavior as "erratic". You're also limited in what you can achieve remotely. You can pause or resume cleaning; but the app doesn't offer a return to dock option, for example, in the even the bot ends up doing something that it shouldn't during a cleaning run – and based on my experience, this could happen. This does mean that it's probably best to avoid setting the Roomba Combo off on a clean unsupervised, which is a little annoying since most folk are likely to prefer to have their robovac complete duties while they're out of the house, for minimal disruption.

Note, too, that there's no option to add an auto-empty dock, which will result in an irritating amount of manual emptying if you have pets or a large, high-traffic household. However, for small homes, emptying is perfectly manageable and the tiny, charge-only dock is actually a benefit. (Note: the newer, similar Roomba Combo 2 Essential does have an auto-empty dock).

Despite having had a somewhat frustrating time testing this spirited little robovac, I'd still actually recommend it to some people. If you have a small home and just want to do whole-home cleans once or twice a week, the Roomba Combo will perform just fine. The small dock won't get in your way, and if you're happy to manually empty it every couple of weeks, then it could be a major time- and effort-saver for very little outlay. That's the short version; read on for my full Roomba Combo Essential review.

Roomba Combo Essential robot vacuum, dock and mop pad in reviewer's home — (Image credit: Future)

Roomba Combo Essential review: price & availability

List price: $274.99 / £269 / AU$499
Launch date: April 2024
Available: US / UK

The Roomba Combo Essential robot is widely available around the world. It comes with a list price of $274.99 in the US, £269 in the UK and AU$499 in Australia, but I've already seen it discounted heavily – at time of writing, the Black Friday robot vacuum sales are in full swing, bringing the price down closer to $150 / £150.

Even at the list price it's in the budget bracket, and performance is roughly what I'd expect at that price. You don't get the extensive features and hands-off dock functionality of pricier bots, but build quality is good, and there are some thoughtful design features. As a basic model it offers decent value for money, especially if you can snag a discount.

Value for money score: 4 out of 5

Roomba Combo Essential specs

Roomba Combo Essential review: design

Combination vacuum and mop with a low-profile design
Basic charge dock; no self-empty features
Single bristle roller rather than iRobot's usual dual rubber rollers

The Combo Essential is a combination model, which it offers vacuuming and mopping capabilities. Many (pricier) robovacs have a raised central puck to house a camera; because the Combo Essential comes without, it has a relatively shallow profile, enabling it to clean under low furniture without issue.

There are three physical buttons on the bot itself: a Clean button (with power icon) to start, pause and resume cleaning tasks; a Home button to send the Roomba Combo back to its dock; and a Spot Clean button for tackling small, targeted mess. On other robovacs I've tested, these have been superfluous; but on the Roomba Combo Essential, I did find myself having to use them fairly regularly (more on that in the Performance section).

Flip the bot over, and you'll find a V-shaped bristle brush. It's described as "multi-surface", so presumably built for use on both hard floors and carpet. This is the only Roomba to not feature iRobot's patented dual rubber rollers. These rubbery rollers are excellent at pulling hair and debris from carpets, so I was interested to see how this alternative design compared. There's the usual triple-pronged edge brush, designed for tackling dirt at the edges of rooms.

Roomba Combo Essential robot vacuum flipped over to show brushroll and side brush — This is the only Roomba to have a single bristle brushroll rather than two rubbery ones (Image credit: Future)

Annoyingly, iRobot refuses to release its suction stats, arguing that other design elements also play a part in the overall effectiveness of a robovac's dirt pick-up. While that is true, a figure in Pa does provide an easy point of comparison when sussing out your various options.

What I do know the Roomba Combo offers the same "standard" cleaning offered by the majority of other Roombas (bar those right at the top of the range), and that it has 18x more suction power than the Roomba 600, which perhaps isn't surprising given that series launched in 2012. You can select from three different suction levels in the app.

Dust bin and water tank for Roomba Combo Essential robot vacuum — This section houses the filter, dust bin and water tank, plus a handy cleaning brush and hair-cutting tool (Image credit: Future)

Housed at the back of the robot is a removable section that includes both the dust cup with filter and the water reservoir. This is very well designed, with a brush/slicer tool clipped in, for clearing any stuck debris from the bin, and removing tangled hair from the brushroll. The inlet for the water reservoir is found beneath the rubber stopper bearing a water droplet icon.

Roomba Combo Essential robot vacuum flipped over to show brushroll and mop pad — The D-shaped mop pad clips on and off (Image credit: Future)

The mop is a D-shaped microfiber pad. These are pretty common (even on far pricier models), although I tend to find dual, spinning mop pads do a better job of scrubbing. Some budget models simply drag a wet wipe across the floor, so the Roomba Combo's offering is at least a big step up from that approach. In fact, I was pretty impressed with this model's mopping capabilities, but I'll get into that in more detail below.

The mop pad is fed from the small onboard water tank, and there are three water level options, which you set manually. This robot can vacuum and mop simultaneously, thus taking care of your hard floor cleaning in a single pass, although I probably wouldn't recommend doing this.

Some more affordable Roombas, such as the Combo j5, require you to manually swap over the whole back plate when you want to change from vacuuming to mopping. Here, the tank stays in place; but if you want to send the bot on a vacuum-only run (or avoid damp carpets), you'll need to remove the mop pad. It clips on easily, on top of where the bin and water tank sit.

iRobot Roomba Combo Essential dock — The dock is very compact (Image credit: Future)

The dock is a minimalist unit that simply charges the bot. In fact, it's teeny-tiny compared to other robovacs I've come across. Most pricier Roombas have the option of adding a more advanced base (sold as "Plus / +" versions) – the simplest of these just empties the bot's small dust cup into a larger one in the dock, while the most advanced options can also refill the water tank and wash/dry the mop pads.

There are no alternative dock options here, so you'll have to take care of all that maintenance manually. For people like me who have a small home, that's a worthwhile compromise not to have a bulky dock cluttering up the space. However, if you have a large home with lots of people traffic, or pets, it's probably worth choosing an option that can be used with a self-empty dock, to save you the hassle of constant manual emptying.

One minor complaint is that I found the cable a little short (41in / 105cm long). That, together with the requirement that the dock sit on a hard floor and have half a meter of clear space either side and 1.2 meters in front (this is pretty normal for a robovac dock) meant I had to get an extension lead out. There is a cable tidy at the back of the dock to prevent the bot becoming tangled in any spare cable on its travels.

Roomba Combo Essential robot vacuum packaged up and in its box — The Combo Essential came with clear setup instructions (Image credit: Future)

Setup was straightforward, simply involving removal from the packaging, snapping on the side brush and mop pad, plugging in the dock and charging. There are clear instructions in a booklet, plus a QR code to download the app, and a further one to link the bot to your app. This app then walks you through the final stages of getting ready to clean, before (in my case) launching a software update.

Since the Combo Essential works on a 2.4GHz network, the official advice is that you'll need to make sure both the bot and your phone are also on 2.4GHz Wi-Fi during setup. After that, you can switch back to 5GHz, if you have it. However, I thought I'd try setting up my bot without changing the settings on my Wi-Fi and it managed just fine.

This is a more basic model, so don't expect a long list of smart features. It's powered by iRobot OS, promises up to two hours of cleaning on a single charge. It can be controlled via the iRobot Home app or with your voice, provided you have an Alexa-, Siri-, or Google Assistant-enabled device.

Design score: 4 out of 5

Roomba Combo Essential review: performance

Decent vacuuming, surprisingly good mopping
Erratic behavior
Requires more manual involvement than most

Having set up and charged the Roomba Combo Essential, I set it off on a whole-home vacuum of my one-bedroom flat. This did not go very smoothly. On the first run, the bot bumped its way around a bit before finally becoming stuck in a cycle cleaning back and forth in front of my fireplace (there were zero obstacles preventing it from leaving the area).

After around 25 minutes or so completing this same short route, I decided to send it back to dock to try again. There was no option to send it back to the dock via the app, so I had to press the button on the machine itself. On its way to the dock, it took a detour into my bathroom for the first time, and simply stopped there – again, for no apparent reason. A second attempt at a full-flat clean yielded slightly better results, but still far from perfect.

Screenshots from Roomba Combo Essential companion app — The bot's first (center) and second (right) attempts at mapping my apartment (Image credit: iRobot / Future)

After the initial mapping process was as complete as I could hope for, I started with our standard vacuuming tests: a sprinkling of oats and (separately) blitzed up biscuit crumbs, sprinkled on the floor, to see how the robotic would cope with fine and chunky debris.

I started on carpet, using the Spot Clean function and the medium vacuuming setting. The Roomba Combo Essential flicked around a fair bit of debris, but sucked up most of the spillage on the first go. I then bumped up the settings to maximum suction, and ran the test again, after which there were only a few remnants remaining.

Image 1 of 4

iRobot Roomba Combo Essential before the vacuuming test on carpet, with lines of cookie dust and oats on the floor in front of it — Before embarking on the vacuuming test on carpet (Image credit: Future)

Image 2 of 4

iRobot Roomba Combo Essential during the vacuuming test on carpet — During the first pass (Image credit: Future)

Image 3 of 4

iRobot Roomba Combo Essential after a single pass of the vacuuming test on carpet — Results after the first pass, on medium suction (Image credit: Future)

Image 4 of 4

iRobot Roomba Combo Essential after completing a spot clean on carpet — After a second spot clean pass, in maximum suction mode (note the spiral pattern in the carpet) (Image credit: Future)

On hard floors the bot's performance was a little better. Still a fair bit of flicking mess around, but medium mode was enough to pull up most of the debris on the first pass.

Image 1 of 2

iRobot Roomba Combo Essential, vacuuming test on hard floor — Before the suction test on hard floor (Image credit: Future)

Image 2 of 2

iRobot Roomba Combo Essential after a single pass on hard floor, vacuuming test — After a single pass on hard floor, medium suction mode (Image credit: Future)

In fact, the issue on hard floor wasn't so much with suction but navigation. On carpet, the Roomba Combo made its way out from where I had placed it in a neat outward spiral shape, thus gathering most of the debris on its travels. However, on my lino floor, for seemingly no reason, it decided to adopt an arc-based route. As a result, it was tricky to get it to even pass over the debris.

Since there's no auto-empty, you'll need to manually empty the onboard dustbin. This mechanism is straightforward, and feels well designed, with chunky clips to detach the bin. If you're cleaning a relatively small home (and don't have pets), this isn't too much hassle.

When you want to mop, you'll need to attach the mop plate onto the bot. This is simply a case of clicking it into place. iRobot suggests dampening the mop pad before attaching it, for best mopping results. You'll also need to fill up the onboard water tank before you launch any "combo" job. If you try to launch a vacuum-only task, it will helpfully inform you that the mop pad is attached.

iRobot suggests removing rugs before launching a combo run, and you'll also need to physically block off any areas where you don't want the bot to venture with its mop. I don't have a door between my (lino) kitchen and (carpeted) lounge, so I had to create a physical barrier before each combo run.

iRobot Roomba Combo Essential in reviewer's home — (Image credit: Future)

I had low expectations for the Roomba Combo Essential's mopping skills, but I was pleasantly surprised. Again, navigation was erratic, but I could see from the damp stripes on my floor that it was doing an efficient job – in fact, better than some far pricier robot vacuums I've tested.

My only real complaint was that it really tried hard to escape into my carpeted lounge – if you don't have doors you can close, you'll need to be prepared to put some sturdy barriers in place.

I also tested to see how well the Roomba Combo Essential coped with sticky mess (tomato ketchup) and liquid mess (apple juice). It sucked up the juice with no issues, and smeared the ketchup about a bit; but ultimately, after a couple of passes, the robot vacuum had cleared it.

Having said that, I wouldn't actually recommend using a robovac on spillages such as ketchup, because the condiment will get on the wheels and track around the house. Here, it ended up on the tracker wheel, which isn't removable and thus proved a pain to clean.

Image 1 of 3

Ketchup and juice on the floor before mopping tests on hard floor with iRobot Roomba Combo Essential — Spillages before the test (Image credit: Future)

Image 2 of 3

iRobot Roomba Combo Essential during mopping tests on hard floor — During the mopping test (Image credit: Future)

Image 3 of 3

iRobot Roomba Combo Essential after mopping tests on hard floor — After a single pass (Image credit: Future)

This robovac vacuums and mops at the same time, but I'd actually recommend running over surfaces in vacuum-only mode first. I did my combo run while there were still remnants of the vacuuming test on the floor, and it ended up in a disgusting gunk in the dust bin.

In general, it's worth stating that no robot vacuum will do as good a job of mopping as a manual mop option. They're really just for light cleaning, and for this, I found the Roomba Combo Essential more than adequate.

After each combo run, you're advised to empty the water tank of any unused water, while also rinsing the mop pad and leaving it to dry. Since there's no spare pad included, you'll need to make sure you have time to do this (spares are available to buy via iRobot, alongside other replacement parts). It's machine-washable for occasional deeper cleaning.

Performance score: 3.5 out of 5

Roomba Combo Essential review: app

Well designed, but limited options
Can't do some basic things remotely
Compatible with popular voice assistants

iRobot's companion app is well designed and intuitive. It offers only basic customization / control options: essentially, you can choose from three vacuum and three mopping modes, and you can choose to vacuum-only or combo vac-and-mop. Pricier models offer far more control over what they clean and how they do it.

After a task is complete, the app will provide a time summary of recently completed tasks and an outline of its journey. You'll need to figure out where the bot has and hasn't been from just a shape – there's no labelling of rooms here. That's expected at this price point, but I do struggle to understand why iRobot has opted an almost impossible to see yellow/green color for said maps.

Screenshots from the iRobot Roomba Combo Essential companion app — (Image credit: iRobot / Future)

There are limits to what you can achieve remotely. You can start and pause cleaning, but there's no return to dock button. As such, if you need to cut a job short for whatever reason, you'll need to find the bot and press the button on top. For spot cleans, you'll need to manually pick up the bot and take it to the bit that needs cleaning, then press the Spot Clean button.

You can't instruct the bot to clean just one room, and because no-go zones aren't an option, if you want to stop it from going somewhere, you'll need to physically restrain in (using doors).

There is a Clean While I’m Away automation option, where the bot will automatically start cleaning when you leave the house – although, personally, I wouldn't leave this bot to clean unsupervised. Finally, the app offers suggested schedules based on previous jobs.

App score: 3 out of 5

Roomba Combo Essential review: alternatives

Within the "cheap Roomba" remit, there are a few options. If you want to see what you could get if you shelled out a little more, my Roomba range guide should help.

Roomba Vac Essential

In some countries, including North America, there's a vacuum-only model called the Roomba Vac Essential. This is very similar to the Combo Essential, but without any of the mopping capabilities. However, it isn't available direct from iRobot and can be hard to find elsewhere now, too.

Combo 2 Essential

In October 2024, iRobot added the Roomba Combo 2 Essential robot + AutoEmpty dock. The big difference compared to the original Essential is that it has an auto-empty dock, which will be a big benefit for those dealing with high levels of dirt or hair. It also apparently has "2x the cleaning power of the original Essential series". No specifics are given on this, but note that it's not "twice the suction power", so I'm thinking probably design tweaks. It also has an improved bumper design, and the ability to recharge and resume during cleaning missions. In short, a better choice for bigger homes and higher dirt levels.

Should you buy the iRobot Roomba Combo Essential?

Buy it if...

You have a small home
This vacuum has a dinky dock that won't clutter up your space. And if you're dealing with relatively low amounts of dust, it isn't much hassle to manually empty the bin.

You're on a budget
This model is very wallet-friendly, and even more so if you can snag a deal. It delivers decent value for money, too.

You want mopping capabilities
The mop here is surprisingly good for the price. The caveat is that you'll need to be able to close off the areas you don't want mopping, because you can't set no-mop zones.

Don't buy it if...

You want a hands-off option
Basic navigation and limited in-app control mean you'll need to manually intervene to the point it probably isn't a good idea to leave this bot to clean unsupervised. Not to mention you'll need to take care of all maintenance yourself, including adding and removing the mop pad when swapping from vacuuming to vac-mopping.

You have pets or a large home
The small onboard bin and absence of self-empty dock option mean this isn't a good choice for anyone dealing with lots of dust or debris. If that's you, the Combo 2 Essential will be a better choice, as that one has a self-empty dock.

You want full control over your clean

This model is best suited to basic, whole-home cleans. For precise control – for example, the ability to send the bot to clean a specific room – you'll need to shell out a little more for a more advanced model.View Deal

How I tested the Romba Combo Essential

I used it for a week as my regular vacuum
I ran specific vacuuming and mopping tests
I tested the app and any special features

For this Roomba Combo Essential review, I used this model as my main vacuum for a week. I ran the standard TechRadar suction and mopping tests, seeing how well it coped with fine debris (cookie crumbs), larger debris (oats), wet spillages (juice) and sticky spillages (dried tomato ketchup). I also noted how well it coped with my collarbone-length hair on its travels. I tested the spot clean function, mapping, and general usability.

Read more about how we test robot vacuum cleaners.

First reviewed November 2024

Oppo Find X8 Pro review: don’t call it an iPhone

5:37 pm |

Author: admin | Category: Computers Gadgets Oppo Phones Phones | Tags: GPU, US | Comments: Off

Oppo Find X8 Pro: Two-minute review

The Oppo Find X8 Pro is built on truly excellent hardware. It sports a sleek premium design, a luxurious 6.78-inch display, and the best mobile camera system I’ve ever used. Its snappy performance and innovative UI animations also make it one of the smoothest-feeling phones on the market, and this combination of great hardware and slick software is reflected in the Find X8 Pro's high (but arguably competitive) retail price.

However, the Find X8 Pro has clearly taken one or two (or ten) design cues from the iPhone 16 Pro, and at several points during this review, I found myself asking how much originality counts for. In many ways, the Find X8 Pro blazes past its inspiration, with smoother software, more powerful cameras, and – to my eye – a more interesting design. But Oppo can only take so much credit for a phone so substantially built on another phone maker’s ideas.

Philosophizing aside, the Oppo Find X8 Pro is full to the brim with impressive tech. Its display is sharp, colorful, and immersive, and at 6.78 inches is about as large as I’d want a phone screen to get. The back of the phone is where the real magic happens, though – the quad-camera system on the Oppo Find X8 Pro is truly class-leading, with four 50MP snappers at various levels of optical magnification.

Internally, the phone is just as solid, with a MediaTek Dimensity 9400 chipset and 16GB of RAM. The Find X8 Pro handled everything I threw at it with aplomb. I felt like I was gliding through the ColorOS 15 Android wrapper in day-to-day tasks, and no game or app seemed to vex the system at all. This software experience is unfortunately marred by a large amount of bloatware.

Overall, whether the Find X8 Pro is for you comes down to how much you care about originality. People who want an iPhone will always get an iPhone, and because of that, I'm drawn to the idea that Oppo isn't so much chasing Apple customers as it is interpreting Apple features, which might even be a boost for those who prefer Android to iOS. However you feel about that debate, though, this is a great Android phone loaded with top-flight features; with a specs sheet like this, perhaps an identity crisis is forgivable.

@techradar
♬ original sound - TechRadar

Oppo Find X8 Pro review: Price and availability

Costs £1,049, available in one configuration
Not available in the US

The Oppo Find X8 Pro costs £1,049 in the UK. It comes in two colors – Pearl White or Space Black – and ships with a non-configurable 512GB of storage and 16GB of RAM. As with all Oppo phones, it's very unlikely that the Find X8 Pro will launch in the US, though the upcoming OnePlus 13 could offer similar (if not identical) specs.

At this price, the Oppo Find X8 Pro is directly challenging premium flagships like the iPhone 16 Pro and Samsung Galaxy S24 Plus, both of which start at £999. Matching these established brands on price is a bold move from Oppo – Chinese manufacturers have traditionally sought to undercut Western competitors on price to compensate for weaker reputation. The Find X8 Pro is full of premium hardware, however, so the value is definitely there.

Oppo Find X8 Pro review: Specs

Oppo Find X8 Pro review: Design

The Oppo Find X8 Pro side-on against some bushes — (Image credit: Future / Jamie Richards)

Comes in two colors – Pearl White and Space Black
Rounded frame with new Quick Button – a shutter button for the camera app
Rounded quad-camera housing

The Oppo Find X8 Pro is a strikingly beautiful device. The unit I tested came in Pearl White, which casts a unique pearlescent pattern on each individual handset (there's also a muted Space Black option). It’s subtle in all but the most direct light, which for me strikes the perfect balance between understated and fascinating. Both color options are rated at both IP68 and IP69 for water resistance against both immersion and jets.

The Find X8 Pro is otherwise simple-looking, but keeps things feeling premium with well-chosen materials and attention to detail. The phone is weighty, at 215 grams, but doesn’t feel overly heavy. The camera housing on the Pearl White model is made of polished metal, rather than the glass found on premium OnePlus models, and I have to say, I’m a fan. It gives an industrial contrast to the artsy rear cover and everything on the rear panel a pleasant muted sheen.

The front panel hosts a 6.78-inch screen, curved slightly on each edge. The selfie camera is a reasonably inconspicuous punch-hole design that serves as the midpoint of the software-only Dynamic Cloud – which is, as it sounds, very similar in form and function to Apple’s Dynamic Island.

Ergonomically, the Find X8 finds a nice balance between the ultra-thin curved phones of five or so years ago and the blocky flagships of today. It feels great to hold, but is a little slippery. The phone also seems plenty durable, with weighty buttons and aluminum rails, and comes with a screen protector pre-installed.

On the topic of buttons, the new Quick Button can be found on the lower right-hand side of the frame. The Quick Button is a camera button in all but name, and currently only supports functions and shortcuts directly related to the camera. It’s a nice addition to have and sits flatter than the iPhone’s Camera Control, feeling overall less obtrusive as a result.

Design score: 4 / 5

Oppo Find X8 Pro review: Display

The Oppo Find X8 Pro against some buildings, with the display on and lockscreen visible — (Image credit: Future / Jamie Richards)

1264 x 2780 resolution (19.8:9 aspect ratio)
120Hz refresh rate
Ludicrous peak brightness of 4500 nits

The display on the Oppo Find X8 Pro is a sharp 1264 x 2780 panel with a 120Hz refresh rate that works in tandem with Oppo’s new animation technology to offer a truly fluid experience. At 6.78 inches, this is as large as I’d want a phone screen to be, and this size lends itself to dual senses of openness and immersion.

The display on the Find X8 Pro isn’t the highest resolution on the market, but it’s certainly enough to make images and video look razor-sharp. There’s plenty of color, and though I’ve definitely seen panels with richer contrast, the Find X8 is well beyond serviceable. The large size and overall sharpness of this panel lends itself well to all types of games, from the landscape shoot-em-up Call of Duty Mobile to charming vertical RPGs like Mousebusters.

The Find X8 Pro’s screen can reach a respectable 800 nits of brightness in typical use, with an absolute maximum of 4500 nits. That is ludicrously bright and far past the realm of actual usefulness. I found the phone to be reasonably bright in normal use, though colors can appear slightly blown out at the higher end of the brightness slider. I never found myself struggling to read the display outside, though the auto-brightness can sometimes make the screen a little too dim indoors.

Display score: 4 / 5

Oppo Find X8 Pro review: Software

The Oppo Find X8 home screen — (Image credit: Future / Jamie Richards)

Android 15 with ColorOS 15
Unacceptable amount of bloatware
Google Gemini-powered AI

ColorOS 15 is one of the smoothest experiences I’ve had with a smartphone operating system, neck-and-neck with OxygenOS 15 – which adds up, considering they’re basically the same thing. AI is provided courtesy of Google Gemini, with support for Circle to Search, writing tools, document summarization, voice memo transcription, and photo editing tools.

Oppo has imbued ColorOS with some of the highest quality animations I've ever seen on a mobile OS. This translates into exceptionally smooth navigation, and in combination with Oppo’s other fantastic UI animations, depth of field effects, and other visual tricks, gives the operating system a playful sense of elasticity and responsiveness I’ve seen nowhere else in the smartphone market, bar maybe the iPhone.

That leads us to an unavoidable fact about ColorOS 15 – the liberal inspiration it's taken from iOS. Everything from the default wallpapers to the way the date and time sit on the lock screen to the layout of the settings app feels like an echo of the iPhone. The Dynamic Cloud, while useful, is barely distinct from the iPhone's Dynamic Island, and the Quick Settings tab is almost a one-for-one recreation of the iOS 18 control center. Oppo is clearly well-versed in making fantastic software that runs like it's being chased, but it’d be nice to see more of the company’s own personality come through.

Another unfortunate mark on an otherwise exceptionally fast software experience is the absolutely unacceptable amount of bloatware the phone ships with; a ridiculous inclusion on a device of this price that regrettably tarnished my first impressions of the phone. I also couldn't get Google Wallet to enable contactless payments – unrelated, but important.

Software score: 3 / 5

Oppo Find X8 Pro review: Cameras

The Oppo Find X8 Pro's camera housing — (Image credit: Future / Jamie Richards)

50MP wide camera
50MP ultra-wide camera
50MP telephoto with 3x optical zoom
50MP telephoto with 6x optical zoom

The camera system on the Oppo Find X8 Pro is absolutely superb. This is a robust, flexible, and staggeringly powerful camera setup that excels in most situations, particularly with its optical zoom and night photography. While there are a wealth of modes, features, and shooting options built into the Find X8’s camera app, the phone is truly brilliant at offering a fast and reliable point and shoot experience – I never had to consciously consider choosing night mode, or portrait mode, as the default photo tab worked so well. The new Quick Button – a shutter button in all but name – elevates this phone to something closer to a traditional digital camera, and the hardware is certainly there.

Each of the four cameras affixed to the Oppo Find X8 Pro has a 50MP sensor, ensuring consistent quality across its wide optical zoom range. You get an ultra-wide camera, main wide camera, 3x telephoto, and 6x telephoto. All of these cameras feel like powerful tools rather than tacked-on gimmicks, and despite my noted disdain for ultra-wide snappers I must say that this is the best one I’ve come across. Zooming in to the telephoto cameras feels like a natural extension of the main camera, and some excellent software trickery means the transition between lenses when zooming in and out is rarely noticeable.

The Find X8 Pro's optical zoom range of 6x is close to class-leading at this point, now that Samsung no longer fits its phones with 10x lenses. The Find X8 also offers a ludicrous digital zoom range of 120x, which is impressive up to about 40x and then serviceable up to 60x. Past that point, you’re relying on post-processing or an optional AI Telephoto Zoom mode to fill in the gaps and sharpen the blurry original image. The AI zoom isn't great at details, but can guess the outline of shapes and text with decent accuracy.

The camera system’s post-processing is very active overall – some people will prefer a less edited look, but I think it adds a nice amount of color depth, contrast, and sharpness, which directly opposes the brightened style favored by the iPhone and Galaxy flagships. As for video, the phone shoots in 4k at 60fps with the ability to shoot in slow-motion at up to 480fps in 720p.

And, of course, there’s a new way to control the camera system on the Find X8 Pro. The Quick Button appears in the same position and does some of the same things as the iPhone’s Camera Control – it’s seemingly a haptic-sensitive button that supports swiping touch gestures. The Quick Button only does a few things, though – a double press opens the camera app, wherein a single press takes a photo, a long press either takes a burst of photos or a video, and swiping back and forth in landscape mode zooms in and out.

Sure, this isn’t as deep a feature set as Apple’s version, but I still found the Quick Button to be massively effective in reducing the time from thought to photo. The only complaints I have are that the scroll-to-zoom can be a little ‘sticky’ sometimes or occasionally just not work, and that there’s no half-press-to-focus function (Oppo missed an open goal with that one).

Camera score: 4.5 / 5

Oppo Find X8 Pro Camera Samples

Image 1 of 5

The Eiffel Tower, at night, illuminated — (Image credit: Future / Jamie Richards)

Image 2 of 5

Epping Forest — (Image credit: Future / Jamie Richards)

Image 3 of 5

Offices along the Seine — (Image credit: Future / Jamie Richards)

Image 4 of 5

A Parisian street — (Image credit: Future / Jamie Richards)

Image 5 of 5

The Moon — (Image credit: Future / Jamie Richards)

Oppo Find X8 Pro review: Performance

The Oppo Find X8 Pro running Call of Duty Mobile — (Image credit: Future / Jamie Richards)

MediaTek Dimensity 9400
GPU: Immortalis G-925
16GB of RAM

Day-to-day, the Find X8 Pro performs admirably, powered by the MediaTek Dimensity 9400 chipset. I encountered no slowdown at all in general usage, and found I could swiftly switch between apps and games with no fuss from the hardware.

The phone also performs well across its array of AI tools, with reasonably fast load times and no real lag or slowdown. The Quick Button lives up to its name in accessing the camera app, which opens near-enough instantly from anywhere in the OS.

The Find X8 Pro comes equipped with 16GB of RAM, a generous allotment that means the phone has plenty of headroom for multitasking and AI. The phone's combination of strong internal specs and a large display also makes it a capable gaming machine, and I had no issues booting up games like Atom RPG or Call of Duty Mobile for sessions on the go, with little noticeable warming.

To put it simply, the Oppo Find X8 Pro just feels efficient. I didn’t notice anything putting more strain on the battery, and the phone seems happy to sustain a variety of concurrent processes. The phone excels in shaving milliseconds off of the hundred-a-day tasks: switching apps, opening files, installing software, and so on. This all adds up and makes using the Oppo Find X8 a fluid and satisfying experience.

Oppo Find X8 Pro review: Battery

The USB-C port of the Oppo Find X8 Pro — (Image credit: Future / Jamie Richards)

5,910mAh battery
80W wired charging
50W wireless charging

The Oppo Find X8 Pro sports an all-day battery life, with power to spare. The 5,910mAh silicon-carbon battery gives the Find X8 Pro exceptional longevity. It handles busy days of mixed use with no issue, and doesn’t seem to drain too drastically during gaming sessions or when playing back longer videos.

The real magic comes when it’s time to plug in the Find X8 Pro to recharge – the phone doesn't only come with a charger, which is itself a major win in today’s market, but an 80W charger using Oppo’s own SuperVOOC technology. What that means in practice is blisteringly fast charging speeds and more flexibility for battery top-ups. I almost never saw the Oppo Find X8 Pro run out of battery, as even a cursory 5-minute charge could net me an extra 10% or so of battery life. The phone also supports 50W wireless charging, and reverse wireless charging.

When I tested the charging speed of the Oppo Find X8 Pro, I found that the phone reached 50% charge in about 20 minutes and 100% in around 45 minutes. I started the test, as despite my best efforts I couldn't get the phone to completely run out in a reasonable amount of time.

Standby times are also exceptional, and the phone will do everything in its power to prevent this with warnings at 20%, 10%, 5%, and 2%, before launching into Super Power Saving mode at 1%, limiting your usage to just six apps.

Battery score: 5 / 5

Should you buy the Oppo Find X8 Pro?

Buy it if...

You want the best cameras

The Oppo Find X8 Pro has a simply fantastic camera system that rivals any of our present choices for the best camera phones. The new Quick Button adds even more control.

You want a truly premium design

The Find X8 Pro makes some bold choices with its design, but ultimately feels as luxurious as it does aesthetically fresh. It hits a home run with its ergonomics and is clearly built to last.

You want a beautiful display

The Find X8 Pro comes equipped with a beautiful and immersive 6.78-inch display that rarely looks anything less than great. It's large enough to be a serious contender for watching TV shows and movies on, too.

You want impressive battery life

The Oppo Find X8 Pro lasts a full day of mixed use with energy to spare, with a huge 5,910mAh cell that simply refuses to run all the way down. Charging is absolutely rapid, too.

Don't buy it if...

You're on a budget

The Find X8 Pro offers a lot of high-quality hardware, but you'll certainly pay for it. Chinese phone makers can no longer be relied on to undercut Western brands at the top end of their lineups, and Oppo has proved no different.

You value originality

The Oppo Find X8 Pro does some things better than the iPhone 16 Pro, but it's fairly obvious that the phone was designed with some serious Apple inspiration. If you're someone who likes to reward originality, you might want to look elsewhere.

Oppo Find X8 Pro review: Also consider

iPhone 16 Pro Max

The real thing, as it were. Those who want an iPhone probably won't be swayed by the Find X8 Pro, but nevertheless it's worth considering paying a little extra to scratch the Apple itch if it's one you find yourself stuck with.

Read our iPhone 16 Pro Max review

Samsung Galaxy S24 Plus

The Samsung Galaxy S24 Plus takes the premium design, exceptional cameras, and powerful AI tools of the base-model S24 and puts them into a larger frame, with a bigger display and even better battery life. If you want a large Android phone from a more recognizable brand, this is one to consider.

Read our Samsung Galaxy S24 Plus review

iPhone 16

If you're more intrigued by the Find X8 Pro's Quick Button than anything else, it could be worth taking a look at the iPhone 16. Sure, it's got a humbler specs sheet than Oppo's new flagship, but the Camera Control is far more powerful than the Find X8 Pro's shutter button. It helps that it's a fair bit cheaper, too.

Read our iPhone 16 review

How I tested the Oppo Find X8 Pro

My testing of the Oppo Find X8 Pro included several specifically chosen test scenarios as well as more general day-to-day usage over the course of about one week. The model tested came in the Pearl White color option and came with 512GB of storage.

I used the Oppo Find X8 Pro as my everyday smartphone for about a week to test it, using it to chat with friends and family, scroll through websites and social media, watch videos, listen to music, and play games. I went out to test all four of the phone’s cameras in a variety of conditions. I then considered the performance and value proposition of the Find X8 Pro using my knowledge of the smartphone market and journalistic training.

For more on our smartphone test process, be sure to check out our guide to how we test phones for review.

Lomo’Instant Wide Glass review: is it really the sharpest instant camera ever?

1:22 pm |

Author: admin | Category: Cameras Computers Gadgets Instant Cameras | Comments: Off

Lomo’Instant Wide Glass: One-minute review

Lomography has released an updated version of its popular Lomo’Instant Wide camera, with a new glass lens replacing the previous plastic one. The Lomo’Instant Wide remains one of the few and best instant cameras on the market that makes use of Instax Wide format film, but many Lomo fans will be glad that Lomography has listened to customer demand in launching the Lomo’Instant Wide Glass model. It's a direct rival to Fujifilm's Instax Wide 400 camera, which has also been given a modern upgrade and fresh design, (but which doesn't offer as much creative control).

The Lomo’Instant Wide Glass is being marketed as the sharpest instant camera on earth, and as a long-time fan of instant cameras, I was very eager to test this claim. Lomography sent me an early prototype of the Lomo’Instant Wide Glass for this review, and I've been hugely impressed.

Lomo’Instant Wide Glass review — (Image credit: Beth Nicholls)

Lomography has made only very minor design tweaks with the new model, and it's easy to see why – if it ain't broke, don't fix it. I love the retro suitcase-style design of the camera, though it's a shame that it still has the offset viewfinder, which has been a bugbear since the original Lomo’Instant Wide was first released in 2015. This can cause issues with framing your subject, though the viewfinder parallax markers do help.

In short, this camera takes beautiful and sharp photos with the 90mm glass lens (35mm equivalent) when focused correctly. It allows for creative shooting with a multiple-exposure mode, flash control, exposure tweaking, and bulb settings, while accessories like the splitzer and colored gels add to the instant fun. The remote-shutter lens cap is genius (just be careful not to accidentally trigger it), and the camera can be used in a studio setting too with external flash thanks to the PC sync port and tripod mount.

Lomo’Instant Wide Glass: Price and availability

The Lomo’Instant Wide Glass is available for $279 / £249 / AU$299, which I think is a very reasonable price given the image quality it produces and its gorgeous design – I'd buy this camera purely for it to sit on my camera shelf.

It's more expensive than Fujifilm's recent Instax Wide 400 model ($149.99 / £129.99 / AU$229.99), but isn't quite as premium-priced as other wide-format glass competitors like the Polaroid I-2 ($599 / £599 / AU$1,099), which uses i-Type film, or even the Mint InstantKon RF70 (approx $900 / £999 / AU$1,200), which has been considered for some time as the GOAT of instant cameras (sorry).

Anyone who's looking to buy an instant camera should know that film costs are still quite high, and you aren't guaranteed the same quality that you get with one of the best cameras for photography, or even from using a camera phone in most cases. Instant photography should be more about experimentation and having fun, rather than outright image quality. That said, Instax Wide film is one of the more affordable formats, and it's also very accessible and easy to source for most people.

Lomo’Instant Wide Glass: specs

Lomo’Instant Wide Glass: design

Lots of manual controls
The built-in flash can be on/off
Viewfinder is a bit of a mess

The design of the Lomo’Instant Wide Glass is one of my favorite things about it. I've seen some pretty ugly instant cameras come to market in the last few years, *cough, Instax Wide 400*, but I love the retro-style design of this Lomo, and the glass lens makes it look much more premium than its predecessor.

It's easy to see why Lomography hasn't changed much in the way of design from the Lomo’Instant Wide to the new Wide Glass model. Although, I did question why the selfie mirror has disappeared from the front of the camera with this latest model. I asked Lomography for some clarification, and a spokesperson told me: "We developed this camera more for professional, studio use in mind and less so for selfie shooting, which is why we didn't feel the need for this feature in this instance."

It's a fair point, and the camera does admittedly look much smarter without it. I managed to still take a selfie with this camera despite the lack of a selfie mirror, which you can see in the sample images section, and I'll talk more about how I captured it in the performance section below too.

Image 1 of 5

Image 2 of 5

Image 3 of 5

Image 4 of 5

Image 5 of 5

In terms of build quality, the Lomo’Instant Wide Glass does have a fair bit of weight to it, and it feels incredibly sturdy and premium thanks to the metal lens barrel and glass element. There are two buttons on the back of the camera, one for toggling the flash and the other for multiple-exposure mode, plus a switch for selecting the level of exposure compensation and a dial at the bottom for selecting modes.

I think it's great that the flash can be turned on and off, although be aware that it's always-on by default when you turn on the camera, so if you don't need it remember to turn it off once you're ready to shoot. There are two LED lights above the flash button, one to let you know when the flash is charged (it will light green or blue) and another to tell you it's on.

The shutter button is the striped rectangular button on the front of the camera, and I love that it not only looks cool but has a nice clicky feel to it. The viewfinder is a bit of a mess, though. I often had to triple-check that what I could see through the viewfinder actually lined up with the direction in which the lens was pointing. Inside the viewfinder there are close-up frames to help you compensate for parallax and get a more accurately composed shot, but you still need to keep an eye on this.

The only real gripe I had with the design in terms of handling was the lack of grip, and the width of the camera, which made it hard to carry around at times (Lomography doesn't include a camera strap accessory with this camera, and I didn't have a spare). I understand that instant cameras, and especially wide-format ones, tend to be on the large side, and this is something that can't really be helped.

I found it slightly annoying that the print counter on the back of the Lomo’Instant Wide Glass counts up from 1 to 10 once a new film had been loaded, and that when it shows 10 that means you have one print left to shoot. I'm used to instant cameras counting down from 10, so this took some getting used to.

However, I really like that Lomography included another little window on the back of the camera for you to see the yellow stripe on the film cartridge, as a quick way to tell if film is loaded. Not many film cameras I've used have this, and it's a nice touch.

Lomo’Instant Wide Glass: Performance

Can capture super-sharp shots
Selfies and portrait shots are tricky (use a tape measure)
Remote shutter-control lens cap

Testing the Lomo’Instant Wide Glass was my first experience of using a Lomography camera, and it took me some serious trial and error to get used to the zone-focusing modes for close-up shots. There are four zones – 0.3 m, 0.6m, 1-2m, and infinity – and you can switch between these by twisting the lens. The original Wide’s closest focus zone is 0.6m. I've used manual instant cameras before, like the Instax Mini 99, and had no issues. So I'm not sure why this particular Lomo camera was so tricky to shoot with – maybe it's just me.

I ended up wasting a ton of film during the testing process with the Lomo’Instant Wide Glass, but I learnt plenty. Pro tip: take a tape measure with you on shoots if you want to gauge the exact distance from the lens to your subject, and measure from the film eject slot, and not from the front of the lens.

Lomography says it plans to release an official camera strap with distance markers soon, to help with assessing the distance for zone-focusing, and this will be available from the Lomography online shop (it's not available at the time of writing).

Image 1 of 7

Image 2 of 7

Image 3 of 7

Image 4 of 7

Image 5 of 7

Image 6 of 7

Image 7 of 7

Speaking of accessories, the Lomo’Instant Wide Glass comes with possibly the coolest camera accessory I've ever used: a remote shutter-control lens cap. You just need to put in 1 x CR2025 (3V) battery, and you can click one side of the lens cap to act as a remote shutter, while the other side offers an additional button with a timer feature. It works really well, although you do need to be relatively close to the camera for it to pick up the signal, as I found when using it to take a selfie in 0.6m mode.

The Lomo also comes with colored gel filters to place over the flash, as well as a splitzer lens attachment for more control over multiple exposures. I wasn't sent these extra accessories with the prototype camera, only the lens cap, so I didn't get to test them unfortunately. I would have loved to use the splitzer for creating multiple exposures, which came out beautifully in most cases using the Lomo’Instant Wide Glass, and this kind of creativity paired with the unknown element of instant analogue photography gets very addictive.

The mode dial on the back of the camera has options for A (automatic), B (bulb), f/22 (for manually setting exposure – the prototype I was sent has an f/6 marking but just ignore this), and 1/30 (shutter speed) which is primarily useful for shooting in the studio or when using a tripod. I stuck with using 'A' a lot of the time, and switched to 1/6 (f/22) whenever I wanted a super-sharp shot.

I thoroughly enjoyed my time testing the Lomo’Instant Wide Glass, although I didn't manage to get a single clear macro image, despite many many attempts. With that said, for every blurry and out-of-focus macro shot I got a perfectly crisp landscape shot, so maybe this balances out.

I also found that the prints produced exhibited a lot of vignetting, even when the exposure compensation was set to zero. A bit of research has told me that this tends to be a common theme with Lomography cameras, and it's considered one of those love-it or hate-it aspects of instant photography. Not every print came out like this, and in a lot of cases it occurred when I didn't use flash, so perhaps this contributed to it.

Lomo’Instant Wide Glass: Sample images

You'll be able to see from the sample images below just how many tries it took for me to get a clear image of my dog surrounded by autumn leaves. What I thought would be within the 0.6m zone was actually sharper using the 1-2m mode – it was all very confusing. This is not an easy-focusing point-and-shoot instant camera like some others I've used, and you'll really need to work at it to get the focus right.

Image 1 of 16

Lomo’Instant Wide Glass sample images — (Image credit: Lomo’Instant Wide Glass review)

Image 2 of 16

Image 3 of 16

Image 4 of 16

Image 5 of 16

Image 6 of 16

Image 7 of 16

Image 8 of 16

Image 9 of 16

Image 10 of 16

Image 11 of 16

Image 12 of 16

Image 13 of 16

Image 14 of 16

Image 15 of 16

Image 16 of 16

Should I buy the Lomo’Instant Wide Glass?

Buy it if...

You love wider prints
The Lomo’Instant Wide Glass uses Instax Wide film, which is double the size of credit card-sized Instax Mini prints. If you're serious about showing off your photos there’s nothing like shooting on wider-format film for the maximum amount of detail in your images.

You care about quality
Instant cameras aren't typically known for being sharpshooters, but the Lomo’Instant Wide Glass changes things with a glass lens, and the option for pairing with an external off-camera flash for studio-quality prints.

You're looking for a speedy turnaround time and love the retro vibes
Instant cameras aren't for everyone, but those who appreciate the artistry and nostalgia behind analogue photography will love the gimmick of having an image appear before your eyes, as opposed to shooting with a film camera where developing can take weeks (and is more expensive than ever).

Image 1 of 9

Image 2 of 9

Image 3 of 9

Image 4 of 9

Image 5 of 9

Image 6 of 9

Image 7 of 9

Image 8 of 9

Image 9 of 9

Don't buy it if...

You're big into macro photography
I had a difficult time using this camera for close-up shots, and while this doesn't necessarily mean that you will too, instant cameras in general aren't typically used for macro shooting, and can be extremely fiddly to master, with zone-focusing and extra lens attachments to work with.

You hate spending money on film
Instant cameras are an investment. If you want to keep shooting with your camera, then expect to spend a fair amount on film costs (and accidentally waste a few shots), and ensure that you're stocked up. Instax film, and camera film in general, can be very expensive, but it's worth it if you ask me.

You want an easy point-and-shoot
Unlike some instant cameras on the market, the Lomo’Instant Wide Glass is aimed at more advanced users and is much more complicated to use than your standard point-and-shoot cameras. This is great if you're willing to learn and master the controls, but not if you want something quick and easy.

How I tested the Lomo’Instant Wide Glass:

I used five packs of Instax Wide film (50 shots), including one pack of the black-edition Instax Wide film (10 shots)
I shot with the camera in a variety of indoor and outdoor locations, and in cloudy, overcast, and sunny weather conditions
I experimented with self-portraits, landscape shots, multiple exposures, and closer subjects (which I didn't have much luck with).

I used the new Lomo’Instant Wide Glass instant camera for a few weeks, and I fell in love with it pretty quickly (it was hard to give it back) after putting in so much time and effort to get to grips with it. This involved learning how to master the focusing zones by shooting the same subject using different focus points, using a tape measure to accurately measure distances, and physically moving both myself and the subject to determine what worked at which distances.

I put the Lomo’Instant Wide Glass through its paces in most areas and settings, excluding studio use (I sadly didn't have access to one). I tested the performance of this camera by venturing around my home city of Bath in the UK to capture landscape images, and shot portraits and still lifes, using my dog and house plants as my primary test subjects. I got an all-around feel for the camera's handling and user-friendliness too, with the biggest pain point being the viewfinder.

First reviewed November 2024

IDrive Business review

11:53 am |

Author: admin | Category: Computers Gadgets Pro | Comments: Off

This review first appeared in issue 359 of PC Pro.

I Drive Business is a great cloud backup solution for SMBs concerned about hidden costs as its subscriptions are based only on cloud capacity. Available in a wide range of flexible plans, you can start small and scale up as and when you need to.

Prices start at only £56 per year for 250GB, rising to £838 for 5TB, with options to go up to 50TB and beyond. It has even more appeal as all plans include unlimited workstation and server support so you can secure Windows, macOS and Linux desktops, iOS and Android mobiles, Windows Server, Hyper-V and VMware hosts, and business apps such as Exchange, SQL Server, SharePoint and Oracle.

Features keep on coming as IDrive’s hybrid backups can secure data to local drives or network shares, apps are provided for protecting Qnap and Synology NAS appliances, and it offers disk image backups, cloning and continuous data protection (CDP). Cloud file syncing between IDrive computers is also included, and subscriptions enable an equal amount of sync space.

IDrive Business's desktop app — **The desktop app can protect all popular business apps and systems** (Image credit: Future)

The only optional features are cloud-to-cloud (C2C) backup services for Google Workspace and Microsoft 365. These are managed from a dedicated portal, with the MS365 component costing £16 per user per year to secure OneDrive, Exchange, SharePoint and Teams accounts.

Client deployment is simple: you send email invitations from the portal, which provide links for users to create backup accounts, select AES-256 encryption and download the desktop app. Businesses with remote workers will find a lot to like here as the price includes unlimited users, and admins can remotely access their desktop app, create or edit backup jobs, set schedules and run restore tasks.

The client opens with a default backup set for common files and documents. We modified file and folder sources by adding or deleting them in the Backup pane and scheduled tasks for regular intervals. Files and folders can be easily restored using the local agent or web portal, and IDrive provides ransomware protection by retaining up to 30 file versions.

To secure our VMware ESXi virtual machines (VMs), we provided the IP address and credentials of our vCenter host and selected VMs from the list presented. Jobs default to running hybrid local and cloud backups and, for the former, IDrive can use a storage location on the system running the app or a mapped drive.

The same procedures apply for securing local SQL Server databases, while Exchange Server and Hyper-V VM backups need the desktop app installed directly on the hosts. When restoring data to any of these hosts, IDrive requires access to the local backup folder and, if it isn’t available, you can copy the relevant files back from cloud storage using the client or web portal.

Online IDrive Business portal — **Remote users can be managed from the web portal** (Image credit: Future)

The Microsoft 365 protection service is just as easy to use; once we’d authorised access to our account, it immediately started full backups for the four suite components and all users. The dedicated portal can be accessed directly from the main IDrive web console or desktop app and provides an overview of all activities and protected items.

You can’t control the schedule as IDrive automatically runs incremental backups three times a day, but you can run extra manual backups for selected users and teams whenever you want. The portal’s recovery panel is easy to use, and we had no problems finding and restoring items such as emails for Outlook users, OneDrive files and Teams documents.

IDrive Business is a top cloud backup choice for SMBs that want to protect on-premises systems and remote workers. Platform and business app support is outstanding, it’s easy to use and the simple capacity-based subscriptions are incredibly good value.

We also ranked the best cloud CRM software.

HP All-in-One 27 cr-0014na PC review

11:49 am |

Author: admin | Category: Computers Gadgets Pro | Tags: Tomb Raider | Comments: Off

This review first appeared in issue 359 of PC Pro.

The first sign of any product’s quality comes when you unpack it from its box, especially when it’s honed to hit a budget. Does it feel too light, look too plasticky? Have corners been cut that make it horrible to use? In short, does it feel cheap?

So it was with an inward sigh of relief that I started assembling the HP All-in-One 27. Finished in all white, it looks classy, while the stand not only includes 100mm of height adjustment but a felt-covered base. That may sound trivial, but it shows the attention to detail often lacking in budget laptops and PCs.

HP has also taken account of this machine’s environmental impact, using 40% post-consumer recycled plastic, 10% recycled metal and even using “recycled” coffee grounds as speckles in the plastic. Sadly, that isn’t reflected in any kind of smell.

Rear view of the HP All-in-One 27 cr-0014na PC's monitor stand — **The stand includes 100mm of height adjustment** (Image credit: Future)

Another nice touch is the 1080p camera built into the top bezel. You slide this up when needed – I kept it up as it’s great for face recognition – and down if you’re worried about privacy. It isn’t the world’s finest webcam, capturing a grainy image with such a wide angle that I had to lean in close to fill the frame, but at least the mic works well.

A basic wireless keyboard and mouse set come in the box. The keyboard’s plastic keys have the same cushioning as a park bench, and it’s so light that it will be pushed out of position by an extra vigorous keypress. But it includes useful function keys, particularly the brightness up/down for the screen: I looked in vain for other physical controls for the display, or software control in the various HP utilities. The mouse is a simple two-button affair, unless you count the clickable scroll wheel, and both it and the keyboard connect to the PC via the same USB dongle.

This leaves three USB-A ports free, with a solitary USB-C port keeping it company. Aside from one USB-A 2 port, all these are limited to USB 3.2 Gen 1’s 5Gbits/sec transfers, which is unnecessarily mean. Especially when the supplied SSD offers only 512GB of storage. While you can theoretically get inside this device to replace the drive, as well as the 16GB of RAM (supplied via two 8GB DDR4 SODIMMs), you’ll need time, patience and skill.

Close-up of the HP All-in-One 27 cr-0014na PC's built-in camera — **The 1080p camera built into the top bezel is a nice touch** (Image credit: Future)

HP sticks to Wi-Fi 6 rather than 6E, but it’s always nice to see a physical Ethernet port (gigabit, not 2.5GbE), and there’s a bonus in the form of an HDMI 1.2 output. This spec is getting on for 20 years old, which is reflected in the fact that the highest-resolution screen you can connect at 60Hz is 1,920 x 1,080. Still, if you have a 1080p screen knocking around it could be useful.

I could be critical of the HP’s 27in panel, as it’s a non-touch 1080p unit with a pixel density of 82ppi. Not great, but at typical viewing distances I was never irritated by a lack of sharpness. It helps that colors are a strong point: it covers 95% of the sRGB space with good accuracy – its average Delta E is 0.68 – while a peak brightness of 275cd/m² is fine for use indoors.

The HP All-in-One is a surprisingly strong choice for films, too, with a pair of beefy 2W speakers that handle explosive scenes and music equally well. Not to the point of audiophilic delight, perhaps, but enough that you can listen to Spotify while working. Their only weakness is lack of volume, but there’s enough oomph to fill a study.

Some might criticize this PC’s power, too, as it includes a relatively timid Core i7-1355U. That’s now been usurped by Intel’s Core 7 processor 150U, but this would only give you a minor speed bump; they share the same basic design of two P-cores and eight E-cores, but the 150U’s peak frequency is higher (5.4GHz vs 5GHz). Besides, this machine is extremely nippy; you’ll only wish you had a more powerful CPU, such as the Ryzen 9 in the Geekom A8 opposite, is if you max out the cores when coding or editing.

HP All-in-One 27 cr-0014na PC benchmarks — (Image credit: Future)

HP relies on the Iris Xe graphics built into the processor, and that means any modern game is out of bounds. To make Shadow of the Tomb Raider playable I dropped to 720p resolution and Lowest settings for an average of 37fps; at 1080p, it was a shaky 23fps.

But this machine isn’t designed for games, and despite its year-old processor and elephant’s graveyard of old standards – HDMI 1.2, really? – I ended up enjoying my time with the HP All-in-One 27. Would I have liked it more if the screen was 1440p, the keyboard less Lego-like and there was a shade more power inside? Yes, undoubtedly. At this price, however, I’m willing to overlook such flaws. It offers quality where it counts – the design, the build quality, the screen, the speakers – and £799 is extremely competitive.

We also rated the best budget phones.

Apple EarPods USB-C review: sleek, stylish, yet sonically unremarkable wired earbuds

6:56 pm | November 21, 2024

Author: admin | Category: Audio Computers Earbuds & Airpods Gadgets Headphones | Tags: Apple Music | Comments: Off

Apple EarPods USB-C: Two-minute review

Reader, I want you to cast your mind back to the 2010s, maybe even the noughties – I’m sure many of you will have fond memories of plugging your wired Apple earbuds into your iPod, or perhaps even an early-gen iPhone. And my mind was cast back to this exact period as soon as I got my hands on the Apple EarPods USB-C. These wired earbuds may not fit your iPod anymore, but they’ll work with almost any modern handset – Apple or not – thanks to their USB-C connector. But do these buds merely open a window to the past, or do they craft a strong sonic experience in their own right?

Well, to find out, let’s start with sound quality. Perhaps unsurprisingly, you’re not going to get next-level performance from the Apple EarPods USB-C; after all, they only cost $19 / £19 / AU$29. But for the most part, they do still offer adequate audio. I rarely felt that treble was too grating or that overall sound was tinny – an issue that a lot of cheap competitors are guilty of. On top of that, you get a decent helping of bass – even if it’s not ultra-clear or able to stretch to extreme depths. Given these also support Apple lossless audio, at a glance they seem decent for general audio quality – but let’s drill into the details.

I tried listening to Young Blood by The Naked and Famous and quickly identified one key issue. The electric guitar that blares throughout the track is meant to have a well-defined position in the mix – in the lower-mid range, separated from the bass – to uphold the track’s powerful, full-sounding profile. However, it really didn't sound all too distinct, coming through slightly muddied with sounds in the low-end – an issue that you won’t experience with some of the best wired earbuds.

And speaking of that low-end, you’re not going to be blown away with incredibly clear quality. For instance, I played Ma quale idea by Pino D'Angiò and the iconic, funky bassline was uncharacteristically muddy. This muddiness almost smothered D'Angiò’s smooth, deep vocals, cluttering the soundstage. Despite that, actual bass levels are respectable – you get a solid amount of low-end weight for some super-cheap wired buds, even if clarity isn’t top-drawer. You won’t get tasty sub-bass though. I tried listening to The Boys Are Back In Town by Yung Gravy and although sub-bass was audible, it lacked its imposing, ground-shaking boom.

The lack of bite was also apparent with treble elements in Rains again by Solji and the vocalist’s high notes – despite avoiding the abrasiveness some cheap buds inflict – failed to reach their grandiose, showstopping potential, sounding slightly dulled and restrained.

Something that I feel diminishes the listening experience significantly is actually nothing to do with audio quality, though. That’s right: I’m talking about the fit of the Apple EarPods USB-C. These earbuds don’t have eartips, so you don’t get a proper seal with them. This looser fit means that sound isn’t perfectly concentrated and the buds will sometimes feel as if they’re falling out of your ears. This can be quite frustrating when you’re on the move; I found myself readjusting to get a more snug feel a little too often for my liking. It is worth noting, though, that some may find wearing buds with eartips for extended periods uncomfortable – so your impression of the fit itself will vary depending on personal preference.

A less debatable flaw of the relatively loose fit of the EarPods is that it allows a lot of external noise to seep through. Again, the lack of eartips removes what is typically a passive protective layer, so I often heard colleagues talking in my office or cars zooming by while on walks. If shutting out the wider world is a top priority, I’d simply recommend not grabbing these – there are better wired options for noise isolation, like the SoundMagic E80D or cheap wireless buds with active noise cancellation, like the Earfun Air Pro 3.

But on a positive note, these are a very elegant pair of wired buds – in fact, a lot of budget competitors can’t even come close in the style department. They are a fair bit heavier than a lot of competitors at 1.1oz / 30g, but they never felt heavy in-ear or irritating to wear for longer listening sessions. The drivers are encased in the classic white glossy housing that Apple fans will be well accustomed to. The wire is also slim, rounded and not too bad of an offender when it comes to cable noise – which is still noticeable, but not overwhelming. The USB-C connector here is also pleasingly compact and never got in the way when I was holding my phone.

Finally, the included controller is sleek and well-sized, though it did sit a little closely to my cheek – if it was slightly further down the wire it would be perfect. It includes volume and play/pause controls for music and taking phone calls, as well as a mic. And in terms of quality, the mic is pretty standard. Vocals were decently clear on a voice recording and phone call, although there is some noticeable static in the background – something that’s typical for cheap and even some less cheap buds.

So, at the end of it all, where do I stand on the Apple EarPods USB-C. Did they provide a fun, nostalgic ride for me? Sure, they still have the token Apple charm, sleek looks and minimalist design, and the wired look is aesthetically pleasing, in my view. But did they impress me in terms of audio quality? Well, not quite. The soundstage is a tad messy, with instruments often failing to find a defined pocket to play in. But having said that, there’s not too much tinniness or unpleasantly aggressive treble sounds that you get with a lot of cheap wired buds. Overall, then, the Apple EarPods USB-C are pretty solid given their low price – that is if you can deal with their lack of ear tips.

Apple EarPods USB-C plugged into iPhone 16 with Apple Music showing on the handset's display — (Image credit: Future)

Apple EarPods USB-C review: Price and release date

$19 / £19 / AU$29
Launched in 2023

The Apple EarPods USB-C released in 2023 and are the tech giant’s debut in the wired USB-C world. One of the most attractive things about these buds is their super-low price. They’re available for just $19 / £19 / AU$29 – that’s in-line, or cheaper than a lot of competitors. You can only get them in one color, White, but that was no issue in my book, given the glossy, bright look suits them to a tee.

Apple EarPods USB-C review: Specs

Controller of the Apple EarPods USB-C — (Image credit: Future)

Should you buy the Apple EarPods USB-C?

Buy them if...

You love the way Apple products look
If you typically like the white, glossy look of Apple’s peripherals, you’ll surely be a big fan of these buds – well, design-wise at least. If your top priority is style, these hit the right notes, thanks to a diminutive connector, sleek curved buds and a slim wire.

You’re on a tight budget
These buds subvert the preconception that many have of Apple products – they’re not expensive at all. At just $19 / £19 / AU$29, they’re ideal if you’re working with a limited budget.

Don't buy them if...

You’re an audiophile
If top-drawer audio quality is what you’re after, keep looking. I didn’t find these buds to produce grating, nasty sound, but I didn’t feel that they offered well-defined, separated or dynamic audio either. They’re just decent sound-wise – fine for cheap buds, but not good enough for the keenest of listeners.

You want decent noise isolation
Because of their shape and design, the Apple EarPods USB-C won’t keep sound out effectively whatsoever. If you want passive noise isolation, you’re better off choosing some buds with ear tips in order to form a sound-repelling seal.

Apple EarPods USB-C review: Also consider

Skullcandy Set USB-C
The Skullycandy Set USB-C offer a sleek, curved design, excellent color options and IPX4 waterproofing, making them a worthy budget pick. Audio isn’t going to wow and the controller lacks volume controls, but if you just want some stylish, cheap buds, that likely won’t be a real dealbreaker. Read our full Skullcandy Set USB-C review.

SoundMAGIC E80D
If you want to take a step-up on the Apple EarPods audio quality-wise, the SoundMagic E80D could be the perfect fit. They’re a fair bit more than Apple’s buds, but for less than $50/£40/AU$70, you still get detailed, balanced audio – partially thanks to a built-in DAC. You also get solid noise isolation and a comfortable fit. Sure, the controller is a little fiddly, but otherwise these are a great pair of wired earbuds. Read our full SoundMAGIC E80D review.

Apple EarPods USB-C review: How I tested

Left earbud of the Apple EarPods USB-C — (Image credit: Future)

Tested for one week
Used in the office, at home and while on walks
Listened using both Apple Music and Tidal

I tested the Apple EarPods USB-C over the course of one week. I used them while using Apple Music on the iPhone 16 as well as with Tidal on the Samsung Galaxy S24 FE. I also played tunes on Spotify and watched video content via YouTube. I tested the EarPods USB-C in the office, at home and while out on walks near busy roads.

When listening to music I played tracks from the TechRadar testing playlist, which contains songs spanning a variety of genres – though I also spent hours blasting bangers from my personal library. When appropriate, I compared these buds to the similarly priced Skullcandy Set USB-C, in order to better assess audio quality, comfort and elements of design.

First reviewed: November 2024
Read more about how we test

Zhiyun Smooth 5S AI review: the smartphone stabilizer that always follows

3:15 pm |

Author: admin | Category: Computers Gadgets Phone Accessories Phones | Comments: Off

Zhiyun Smooth 5S AI: two-minute review

Smartphone stabilizers, which use a self-levelling gimbal to keep a mounted phone movement’s smooth, steady and shake-free while it captures video, have become an essential part of many content creators’ toolkits. As a result, there are now dozens of options for anyone who wants to transform their smartphone into a cut-price Steadicam – and Zhiyun has as much experience in this sector as any of its rival manufacturers.

The Smooth 5S AI is Zhiyun’s current flagship mobile stabilizer, putting it in direct competition with models like the Insta360 Flow Pro and DJI Osmo Mobile 6. As its name suggests, it’s an upgraded version of the Smooth 5, sporting a very similar design but incorporating a few improvements – most notably an AI-powered tracking module that I think represents its most appealing selling point.

I’ll get into why shortly, but in terms of general design I found the Smooth 5S AI to be pretty impressive. Constructed of lightweight but sturdy black plastic, it sports a professional look that suggests it’s built for serious creative work. The handle is textured to aid grip and I was pleased by the way the control layout puts a remarkable number of buttons and dials within easy, comfortable reach when it was in my hand. While a tripod attachment allows the gimbal to stand on a flat surface, there’s no extension rod to increase its length (something you get with many rival stabilizers), which makes it less useful for self-shooting vlog recording.

When not in use, the Smooth 5S AI’s gimbal arm can be locked in place. Part of me wishes it folded down as well as the Insta360 Flow Pro and DJI OM 6 (which are both verging on pocket-size when not in use) but Zhiyun would doubtless argue that the Smooth 5S AI’s larger, more complex gimbal offers a greater range of movement and stability than these competitors’ equivalents (NB: Zhiyun also offers a smaller folding stabilizer, the Cinepeer CQ5, for those that require something more portable than the Smooth 5S AI).

Image 1 of 4

Zhiyun Smooth 5S folded and locked for transport with mini tripod accessory — (Image credit: Future | Sam Kieldsen)

Image 2 of 4

Zhiyun Smooth 5S AI controls and buttons — (Image credit: Future | Sam Kieldsen)

Image 3 of 4

Image 4 of 4

Zhiyun Smooth 5S AI trigger, zoom wheel and USB-C port — (Image credit: Future | Sam Kieldsen)

To use the stabilizer, your phone is placed within the ‘jaws’ of a gripping mechanism; the hold is secure, but mounting and dismounting is much quicker and easier with the magnetic clamp method used by the DJI and Insta360 stabilizers. The Smooth 5S AI’s clamp can hold phones up to 10mm thick and 300g in weight and can be manually rotated 90º to switch between capturing portrait and landscape content. Some balancing is required on the gimbal’s roll axis arm once your phone is in place, to improve stabilization performance, but it takes only a few seconds.

When the gimbal is powered on, it’ll automatically self-balance, holding the phone level with the horizon; it’ll also connect to the phone via Bluetooth, provided it’s already been paired before. If you feel the levelling is slightly off, you can manually adjust it using the ZY Cami companion app (more on this later) or ask the app to recalibrate things automatically. I found that I did need to manually adjust to get it satisfactorily level, but once set up properly I didn’t need to touch it again.

Stabilization works very well – to a point. The 3-axis gimbal succeeded in keeping my iPhone 13 level and followed my movements smoothly, but if I tilted the handle more than around 40 degrees in either direction the gimbal would abruptly give up, and the phone would tilt too. This isn’t too much of an issue as long as you’re aware of it, but I was expecting a little more robustness in the stabilization.

There are several stabilization modes to choose from. I generally found Pan Follow, which follows your movements while preventing the phone from tilting up and down, to be the most useful for standard vlog or b-roll content, but other users might enjoy the more dramatic movements offered by the Point Of View or Vortex modes.

Gimbal movement can also be adjust manually using the on-board thumbstick control, while tapping the trigger on the front of the handle twice resets it to its standard position; tapping it three times flips the phone around to face the opposite direction. Other controls of note include an on/off button for the useful front-facing LED fill light and a chunky wheel which can be used to adjust camera zoom and gimbal tilt.

Image 1 of 4

Zhiyun Smooth 5S AI smartphone stabilizer with phone in grip and AI tracker module mounted — (Image credit: Future | Sam Kieldsen)

Image 2 of 4

Zhiyun Smooth 5S AI smartphone stabilizer with fill light switched on — (Image credit: Future | Sam Kieldsen)

Image 3 of 4

Zhiyun Smooth 5S AI smartphone stabilizer — (Image credit: Future | Sam Kieldsen)

Image 4 of 4

Zhiyun Smooth 5S AI smartphone stabilizer in hand — (Image credit: Future | Sam Kieldsen)

The app-agnostic tracking is what really sets the Smooth 5S AI aside from its competitors. Thanks to a small magnetic ‘AI’ module with a built-in camera, which sits on the clamp and can be faced either towards or away from the user, the gimbal is able to track human faces when using any app. Some rival models, like the DJI OM 6, will only track people when using their own companion app, while the Insta360 Flow Pro’s DockKit-enabled tracking means it can track while using the native iPhone camera app (and many third-party apps), but the Smooth 5S AI’s tracking is hardware-based, which means it’ll work with any phone or camera app around.

That’s great for anyone who’d rather use third-party apps, of course, but I’d caution that the tracking is noticeably smoother and more responsive when using the ZY Cami app than it is when using with the AI module. With the latter, the gimbal movements are jerkier and more delayed, which does take the shine off the AI module somewhat (interestingly, the same is true of the Insta360 Flow Pro’s DockKit tracking versus its companion app tracking).

The AI module supports gesture controls: make the ‘OK’ sign to start tracking (a green light indicates that it’s locked onto you), hold up your palm to stop tracking and use the ‘victory’ sign to start and stop recording. These all worked well, in my experience.

The ZY Cami app can be used for capturing video and photos, offering several special shooting modes like panorama, dolly zoom and slow motion. It also allows you to adjust image quality, add beauty filters, adjust gimbal settings, share content via social media and more. I found it to be a decent enough camera app, and using it isn’t a huge disadvantage over, say, the iPhone’s built-in camera app.

Image 1 of 1

Zhiyun Smooth 5S AI tracking module in hand — (Image credit: Future | Sam Kieldsen)

Finally, a quick word about battery life. It’s impressive, with Zhiyun claiming seven hours of use with the AI tracker and fill light on – and my real-world testing suggests that figure is accurate. You can also use the Smooth 5S AI as a power bank, using a second USB-C port on the gimbal arm to top up your phone’s battery while it’s mounted.

While I find the simpler and more compact likes of the Insta360 Flow Pro and DJI Osmo Mobile 6 more appealing on the usability and portability fronts, the Zhiyun Smooth 5S AI is undoubtedly an impressive alternative with solid stabilization and, via its AI tracking module, better built-in subject tracking than either of its rivals.

Zhiyun Smooth 5S AI: price and availability

The Zhiyun Smooth 5S AI costs $249 / £169 / AU$309 and is available now. Do look out for cut prices, as we do see this gimbal on sale from time to time. You can see the live prices in the links above.

Zhiyun Smooth 5S AI: specs

Zhiyun Smooth 5S AI: Also consider

Insta360 Flow Pro
Insta360’s compact foldable gimbal feels like the pick of the current mobile stabilizer bunch. With excellent battery life, a handy power bank function and the ability to subject track when using third-party iPhone apps (or the native iPhone camera), it’s an impressive all-rounder – and cheaper than the Zhiyun Smooth 5S AI.

Read our Insta360 Flow Pro review

DJI Osmo Mobile 6
While only able to track subjects when using its Mimo companion app, the OM 6 offers a more ergonomically pleasing and slicker user experience than both the Smooth 5S AI and the Insta360 Flow Pro; it just feels better in the hand and smoother with its movements. Its 6.5-hour battery life isn’t quite as long as either, however.

Read our DJI Osmo Mobile 6 review

Should I buy the Zhiyun Smooth 5S AI

Zhiyun Smooth 5S AI smartphone stabilizer on desktop — (Image credit: Future | Sam Kieldsen)

Buy it if...

You need a stabilizer that’ll track with any app
Some stabilizers only track with certain camera apps. Not this one: its AI module allows it to keep you centred in the frame no matter what app you’re using to film yourself.

You need a fill light built-in
The integrated LED light makes filming in dark conditions possible without the need to add additional light modules (although these are sold separately if you want things even brighter).

Don't buy it if...

You need an ultra-portable stabilizer
While it does lock up for storage, the Smooth 5S AI doesn’t fold over to an almost pocketable size. You’ll need a fairly large amount of bag space to transport it.

You’re a vlogger who wants to walk and film
With no extension rod inside the handle, it’s harder to film yourself while walking and holding the Smooth 5S AI than with some other mobile stabilizers. Vloggers beware.

How I tested the Zhiyun Smooth 5S AI

One week of use
Tested with iPhone 13
Used for B-roll and vlogs

I used the Zhiyun Smooth 5S AI in and around my home for a week, using it to record footage both on the move and with it sat on a desktop using its tripod. I tested it with my Apple iPhone 13 and a variety of camera apps including Zhiyun’s own ZY Cami and the native iPhone camera app, and used the phone’s front and rear cameras to record b-roll and vlog-style videos.

First reviewed November 2024

Commvault Cloud review

11:46 am |

Author: admin | Category: Computers Gadgets Pro | Comments: Off

This review first appeared in issue 359 of PC Pro.

A highly modular approach makes Commvault’s Cloud an attractive choice for businesses that want a hybrid backup solution they can tailor precisely to their needs. Originally launched a few years ago as Metallic and now integrated into Commvault’s cyber resiliency and recovery cloud platform, it comprises 16 distinct components so looks to have every data protection requirement covered.

For essential off-site backup, you can use Commvault’s cloud storage as a backup destination or choose from 26 third-party providers including Amazon Web Services (AWS), Microsoft Azure and Google. Commvault gives ransomware attacks a hard time, as its Azure-based cloud storage is air-gapped and immutable, with modules now provided for risk analysis and backup content malware scans.

The Security IQ feature presents a security posture rating plus options to enforce extra authorization for restores and deletions. The unusual file activity service alerts you if it detects ransomware attacks and presents the last good recovery point for swift data recovery.

Desktop screenshot of the Commvault Cloud service catalog — **The Security IQ feature keeps your data safe** (Image credit: Future)

The cloud portal presents a service catalogue list, and selecting a module takes you to a dedicated configuration page. Plenty of help is at hand as each one provides details of all prerequisites and clear setup instructions.

After assigning the systems, applications or services the module is to protect, you choose your storage locations; for hybrid backup, Commvault supports local storage or network shares as the primary location and a cloud repository as the secondary stage. Next, you assign a backup plan that defines your recovery point objective (RPO), backup window and data retention periods.

We wanted to protect the lab’s Hyper-V and VMware hosts, which required the Commvault gateway component installed on a Windows Server host on the same network. Downloaded from the portal, this manages communications between sources and destinations and handles all caching, deduplication and hash tables. For Hyper-V backups, you’ll also need Commvault’s VSA package installed on each host server.

We declared a Synology NAS for our primary backup location, used Commvault’s cloud for secondary storage, and each plan started by backing up selected virtual machines (VMs) to our NAS appliance. On completion, they ran an auxiliary job to replicate the local store to the cloud, and the transfer process is speeded up by only sending deduplicated data.

VMware recovery services are outstanding: we could browse and restore guest files, the entire VM or its VMDK files. The live recovery and live mount services can quickly reinstate a failed VM, with the latter loading them directly from a backup on primary storage.

Display of the Commvault Cloud's data protection interface — **Commvault’s cloud portal has a data protection module for every occasion** (Image credit: Future)

A fine choice of cloud-to-cloud backup modules are available, and we found the MS365 option a cinch to deploy. You do need to authenticate separately with Exchange, SharePoint, OneDrive and Teams, but the entire process is handled very smoothly and we had our entire MS365 account backed up in 15 minutes. For item recovery, you select the required MS365 component, choose a recovery point, view all available versions and restore it to the original location or another MS365 user.

The Endpoint module supports Windows, macOS and Linux clients. Once users have installed Commvault’s Edge Monitor app and logged in to their account, it applies your predefined plan. This backs up their system to the cloud, creates a local drive letter for drag-and-drop restores and provides access to a personal self-service web portal.

Pricing could be more transparent, but Commvault Cloud is a great choice for businesses that want a highly customizable cloud backup solution. It offers an impressive range of easily deployed modules so you only pay for what you need, and it has a keen focus on data security and ransomware protection.

We've also ranked the best encryption software.

Barracuda Backup 290 review

10:52 am |

Author: admin | Category: Computers Gadgets Pro | Comments: Off

This review first appeared in issue 359 of PC Pro.

Businesses worried about managing a hybrid data protection strategy may want to consider Barracuda’s Backup appliances, as they do everything for you. These all-in-one physical and virtual solutions provide on-site backup, cloud replication and full data restoration services, as well as optional site-to-site replication, all managed from one cloud portal.

Barracuda offers a wide choice of hardware appliances, with the entry-level Backup 290 on review presented as a low-profile 1U rack appliance fitted with a single 2TB SATA hard disk. This may not sound like very much, but the appliance’s variable block-level deduplication is very efficient; during testing we backed up 1.7TB of data, which Barracuda squashed down to 331GB for an 82% reduction.

Prices for the Backup 290 start at £2,000, with unlimited cloud storage costing £996 per year. Barracuda’s Energize Update service costs £335 per year, with an Instant Replacement subscription adding a further yearly cost of £480.

Front and back views of the Barracuda Backup 290 showing the 2TB SATA hard disk — **The Backup 290 is fitted with a single 2TB SATA hard disk** (Image credit: Future)

To install the appliance, you initially connect a local monitor and keyboard and link it to your Cloud Control account. Barracuda provides agents for Windows, macOS and Linux in the portal, and it’s good value as the price includes support for unlimited clients as well as a number of common business apps.

You use the same agent for all Windows workstations and servers. Once installed, we declared each system as a backup source. The beauty of this solution is that during job creation, you tick one extra box so local backup jobs are automatically replicated to the cloud.

The agent identifies all hosted applications and offered us options to select SQL Server databases and virtual machines (VMs) on our Windows Server 2022 Hyper-V server. An agent isn’t required for VMware hosts as we declared our vCenter server using its IP address and were presented with all VMs on our managed ESXi servers for selection as backup sources.

Once systems are registered, you can assign them to the default backup schedule, which automatically backs up everything on them once a day. It’s easy enough to create custom schedules, assign specific systems and items, and repeat jobs as often as every 15 minutes.

Barracuda employs an “incremental forever” system, which runs one full backup for each host followed by regular incrementals. Ransomware protection is provided as you can use the default retention policy for all hosts or apply custom ones that define the daily, weekly, monthly and yearly periods you want data kept for.

For file recovery, we selected systems from the portal, chose files and folders and restored them to their original location or to another system. The same window provides access to the cloud repository, where the Download option copies the data back to the system running the Cloud Control portal.

Desktop screenshot of the cloud portal utilized by the Barracuda Backup 290 — **The cloud portal keeps you informed of all backup activity** (Image credit: Future)

We could restore selected Hyper-V and VMware VMs directly from the appliance to their respective hosts or to alternative locations, and if the appliance isn’t available you can download their virtual disks from your cloud repository. An Energize Update subscription enables the LiveBoot feature so you can swiftly restore VMs directly to the appliance if the hypervisor is down.

The Cloud LiveBoot feature has an Instant Replacement subscription and allows VMs to be hosted in Barracuda’s cloud for up to seven days for testing, backup validation and file recovery. Internet outages are covered, too, as the appliance has a local web console that provides restore browser and Live Boot management tools.

Barracuda’s Backup 290 makes light work of managing a hybrid data protection strategy and is an attractive option for time-poor SMBs. It’s simple to deploy and manage, the block level deduplication can make big storage savings, and it offers an impressive range of data recovery features.

We also rated the best cloud computing services.

Acronis Cyber Protect 16 Advanced review

10:42 am |

Author: admin | Category: Computers Gadgets Pro | Comments: Off

This review first appeared in issue 359 of PC Pro.

Acronis’ Cyber Protect teams up hybrid backup services with full-strength cybersecurity and endpoint protection. One subscription takes care of everything, and it’s all managed from a single cloud portal.

Cyber Protect 16 Advanced takes the Standard edition and adds features such as Windows patch management, backup malware scans and an endpoint detection and remediation (EDR) service that provides event correlation, threat containment, incident investigation, kill chain analysis and endpoint rollback recovery. Ransomware protection comes with tamper-proof immutable backups and a compliance mode that stops malicious actors from changing account settings and deleting backups.

There are a lot of activities to keep track of, but the cloud portal helps by presenting a customizable dashboard. You have lots of widgets to choose from, including ones for protected system overviews, backup storage usage, vulnerable systems, alerts, detected malware, patch remediation status and blocked website categories.

Desktop screenshot of Acronis Cyber Protect 16 Advanced interface — **Platform support is extensive and the EDR service keep ransomware attacks at bay** (Image credit: Future)

Platform support is outstanding and includes Windows, macOS and Linux systems, iOS and Android mobiles, many popular business apps, ten virtualization hosts, and cloud apps such as Microsoft 365 and Google Workspace. Agent deployment for workstations and servers is a lengthy affair, though, as they must be downloaded from the portal and manually installed, after which they generate a unique registration code and appear in the portal’s devices page.

Hyper-V virtual machine (VM) backups require a dedicated agent installed on the host, and you now have two choices for VMware systems. You can install an agent VM directly on the host and register it with your cloud account or use the new Windows remote agent.

Applying settings is much simpler. You place similar systems in groups and assign protection plans that include your backup settings, encryption passwords, schedules and all cybersecurity settings. For hybrid backups, primary and secondary storage locations can be assigned. We used local Synology NAS shares for fast local backups and the Acronis cloud repository for off-site storage.

Synology NAS appliances can now be protected by a DSM agent app. It temporarily needed root access to register with our Acronis account, and we could then access the appliance from the cloud portal, create a protection plan and choose the shares we wanted backed up to the cloud.

Along with swift file and folder recovery services for remote servers and workstations, the portal provides an impressive range of restore features for Hyper-V and VMware. You can recover an entire VM back to its original location, as a new VM on the same host or another one. For even faster recovery, a temporary VM can be created on the host from a local backup.

The Acronis Cyber Protect 16 Advanced's Cloud Protect portal — (Image credit: Future)

Within workstation and server plans, you can enable real-time malware scanning, apply URL filtering using up to 44 categories, schedule vulnerability assessments, run patch management remediation tasks and enforce removable device controls. When EDR is activated, you can view all incoming alerts from the portal, see lists of all incidents filtered by severity and mitigation status and browse a threat investigation page which provides a kill chain diagram, details of how the attack developed and the processes it interacted with.

Businesses that want all their data backup and cybersecurity in one place will love Acronis Cyber Protect 16 Advanced. Its flexible subscriptions keep costs under control, the EDR service stays one step ahead of cybercriminals and it’s easy to manage.

We also ranked the best free backup software.

« Previous Page — Next Page »

Roomba Combo Essential: two-minute review

Roomba Combo Essential review: price & availability

Roomba Combo Essential specs

Roomba Combo Essential review: design

Roomba Combo Essential review: performance

Roomba Combo Essential review: app

Roomba Combo Essential review: alternatives

Should you buy the iRobot Roomba Combo Essential?

Buy it if...

Don't buy it if...

How I tested the Romba Combo Essential

Oppo Find X8 Pro: Two-minute review

Oppo Find X8 Pro review: Price and availability

Oppo Find X8 Pro review: Specs

Oppo Find X8 Pro review: Design

Oppo Find X8 Pro review: Display

Oppo Find X8 Pro review: Software

Oppo Find X8 Pro review: Cameras

Oppo Find X8 Pro Camera Samples

Oppo Find X8 Pro review: Performance

Oppo Find X8 Pro review: Battery

Should you buy the Oppo Find X8 Pro?

Buy it if...

Don't buy it if...

Oppo Find X8 Pro review: Also consider

How I tested the Oppo Find X8 Pro

Lomo’Instant Wide Glass: One-minute review

Lomo’Instant Wide Glass: Price and availability

Lomo’Instant Wide Glass: specs

Lomo’Instant Wide Glass: design

Lomo’Instant Wide Glass: Performance

Lomo’Instant Wide Glass: Sample images

Should I buy the Lomo’Instant Wide Glass?

Buy it if...

Don't buy it if...

How I tested the Lomo’Instant Wide Glass:

Apple EarPods USB-C: Two-minute review

Apple EarPods USB-C review: Price and release date

Apple EarPods USB-C review: Specs

Should you buy the Apple EarPods USB-C?

Buy them if...

Don't buy them if...

Apple EarPods USB-C review: Also consider

Apple EarPods USB-C review: How I tested

Zhiyun Smooth 5S AI: two-minute review

Zhiyun Smooth 5S AI: price and availability

Zhiyun Smooth 5S AI: specs

Zhiyun Smooth 5S AI: Also consider

Should I buy the Zhiyun Smooth 5S AI

Buy it if...

Don't buy it if...

How I tested the Zhiyun Smooth 5S AI

Recent Posts

Archives

Categories

Tags