Computers - Organizer

The De’Longhi Linea Classic is a budget-friendly, entry-level espresso machine that makes you the barista

11:00 pm | April 22, 2025

De'Longhi Linea Classic Espresso Machine: two-minute review

The De'Longhi Linea Classic Espresso Machine might be one of the best espresso machines for new and experienced baristas alike. The reasonable price tag, simplicity of use, and relatively compact size make it an appealing choice for just about anyone.

While it's not completely automated like a capsule system or a high-end machine that includes a coffee bean grinder and touch screen, it's simple enough to use and takes some of the guesswork out of brewing espresso. A totally manual espresso machine requires you to measure and heat your water to just the right temperature and decide the right amount of pressure to use for your brew. The De'Longhi Linea Classic Espresso Machine eliminates the need for any of that; just fill the water tank with cold water; the water quantity, temperature, and pressure is decided for you. Just load up the portafilter with enough finely ground coffee for one or two shots of espresso, insert the portafilter, and press a button for either a single or double shot. Within seconds, you have a beautiful espresso (or two.)

It's all pretty straightforward, though it's important to tamp your coffee grounds just right. Tamping too firmly causes the water to brew through too slowly, and the espresso will be too intense and bitter. Tamping too loosely lets the water through too fast, and your brew will be too light and sour. If you don't like the automatic setting for water quantity, you can can change the factory setting to allow more or less water to be used.

The frothing wand froths or steams your milk of choice. A setting on the wand lets you choose between frothing and steaming milk. You can also dispense hot water though the wand, which is perfect for making an Americano (espresso with added hot water.) After using the frothing wand, the machine will be too hot to brew espresso; you'll need to run a cooling cycle or give it time to cool down.

De'Longhi Linea Classic Espresso Machine brewing — (Image credit: Karen Freeman / Future)

De'Longhi Linea Classic Espresso Machine: price and availability

Available at many online and brick-and-mortar retailers
Retails for $199.95 (£154 / AU$313)
Discounted on Amazon

De'Longhi Linea Classic Espresso Machine is available directly from De'Longhi as well as most big box retailers both online and in brick-and-mortar stores. The retail price is $199.95 (about £154 / AU$313) but you can find a slight discount on Amazon. At the time of writing it's only available to buy in the US.

De'Longhi Linea Classic Espresso Machine brewing two espressos — (Image credit: Karen Freeman / Future)

De'Longhi Linea Classic Espresso Machine: specs

De'Longhi Linea Classic Espresso Machine: design

Small footprint and lightweight design
Everything you need except coffee and cups included
Fairly straightforward to use but not foolproof

The De'Longhi Linea Classic Espresso Machine is an attractive blend of shiny chrome and plastic. All of the pieces are just heavy enough feel like high quality. It looks nice in my kitchen and would likely look good with just about any decor.

On the front of the machine, you see a pressure gauge and four buttons. On the right side are your power button and frothing wand selection button. On the left are the single espresso and double espresso buttons. The frothing wand control dial is on the right side of the machine and the water tank is at the back.

De'Longhi Linea Classic Espresso Machine with espresso and cappuccino — (Image credit: Karen Freeman / Future)

At just 8.89 x 11.14 x 12 inches (22.6 x 28.3 x 31 cm), the De'Longhi Linea Classic Espresso Machine doesn't take up a ton of space in your kitchen. It's lightweight, too, at just nine pounds (4.1 kg), which is handy if you need to store it away and take it out every time you use it. The water tank has a pretty decent capacity, 57.48 fluid ounces (1.7 liters). I was able to brew a lot of espresso before I needed to refill the tank.

De'Longhi Linea Classic Espresso Machine with everything included flat lay — (Image credit: Karen Freeman / Future)

The portafilter and two filters (single and double espresso-sized) are included in the box. The portafilter is the device with the handle that holds the filters. The scoop that comes in the box is perfectly-sized for a single espresso brew, just use two scoops to make a double. The other end of the scoop is your tamper, which you will use to press the grounds firmly but gently, forming a puck of coffee in the filter. If you tamp too hard or not hard enough, the espresso won't taste very good.

None of the parts of the De'Longhi Linea Classic Espresso Machine are dishwasher-safe, so you'll need to wash all of these by hand after each brew.

De'Longhi Linea Classic Espresso Machine tamping coffee into portafilter — The water tank has a capacity of 1.8qt / 1.7 liters, and slots onto the back of the machine (Image credit: Karen Freeman Future)

If you want to get fancy, you can buy endless accessories, such as a coffee bean grinder, food scale to weigh your coffee, frothing mug, and of course fancy cups and spoons. None of that is included, nor are they necessary to get you started.

On the back of the machine is the water tank, which can easily removed, refilled, and replaced as needed. The wand can be adjusted to dispense hot water, heat your milk, or heat and froth your milk at the same time. It pulls apart for cleaning, which you'll need to do every time you use it.

The drip tray prevents a mess on your counter. It's easy to remove and clean, which you'll only need to do once in a while. Like all of the other parts, it's hand-wash only.

Design score: 4.5/5

De'Longhi Linea Classic Espresso Machine: performance

Produces beautiful espresso drinks with ease
Frother is effective
Getting brew just right takes trial and error

The De'Longhi Linea Classic Espresso Machine performs perfectly in the sense that you load up your coffee in the portafilter, press a button, and beautiful espresso brews every time. However, espresso is a little bit more complicated than that. Taste is highly subjective, but some of my brews were definitely better than others. Getting it just right isn't easy.

If you're not a fan of the factory settings, you can change them to brew your espressos with more or less water than standard. I stuck with the factory settings for my testing.

De'Longhi Linea Classic Espresso Machine packed portafilter — (Image credit: Karen Freeman / Future)

I'm not a trained barista myself, my usual daily espresso comes from my favorite Nespresso machine. So I called upon my middle child, who has taken a class in brewing espresso. He has a fully manual espresso machine at home, so he was excited to try the much easier-to-use De'Longhi Linea Classic Espresso Machine. He gave me some tips for brewing better-tasting espresso, such as loosening up the grounds after scooping but before tamping. He was thrilled with the results.

We did a blind taste test with him, my oldest daughter, my husband, and I, comparing espresso from the Linea Classic to a Nespresso capsule. The results were split down the middle. Everyone's tastes are so different, it's hard to say definitively what is a good espresso and what isn't.

De'Longhi Linea Classic Espresso Machine and cappuccino — (Image credit: Karen Freeman / Future)

There are definitely some quirks with the milk frother. It is quite effective in both steaming and frothing milk, both dairy and non-dairy. It also dispenses hot water, which is handy for making Americano-style (diluted) espresso. However, it doesn't click into place, nor does it click when switching from "hot milk" to "cappuccino" mode. I like to have that confirmation click on devices like this, but you get used to it.

Press the steam button to go into frothing wand mode, and then turn the dial on the side to operate the wand. The biggest quirk about this frothing wand is that once you use it, you can't brew espresso again immediately.

De'Longhi Linea Classic Espresso Machine frothing milk — (Image credit: Karen Freeman / Future)

Once you've frothed or steamed some milk, the machine will likely be too hot to brew espresso again right away. Before you can brew again, you'll need to run a cooling cycle by opening the steam dial to dispense steam and hot water until the heating element has cooled. Alternatively, you can wait for the heating element to cool down on its own.

De'Longhi Linea Classic Espresso Machine brewing cappuccino — (Image credit: Karen Freeman / Future)

Cleanup is pretty easy. After brewing, you'll need to dump out the used coffee puck, I used a plastic utensil to scrape out most of it and a paper towel to wipe out the rest before washing. You'll want to be careful not to let grounds go down your sink drain, even if you have a disposal. Coffee will clog your pipes like cement, so compost or throw away the used coffee grounds. Then just hand wash all of the parts you used. You'll also need to descale the machine periodically, as per the manufacturer's instructions.

Image 1 of 4

De'Longhi Linea Classic Espresso Machine in action — (Image credit: Karen Freeman / Future)

Image 2 of 4

Image 3 of 4

Image 4 of 4

Performance score: 4/5

Should you buy the De'Longhi Linea Classic Espresso Machine?

Buy it if

You want to make authentic espresso drinks with ease

In just a few minutes from start to finish, you can make real espresso and espresso-based beverages like cappuccino. It's quicker and easier to use than similarly-priced fully manual machines.

You want to make real espresso on a budget

At less than $200, the De'Longhi Linea Classic Espresso Machine is a solid entry in the home espresso machine market.

You don't have a ton of space

The lightweight and compact De'Longhi Linea Classic Espresso Machine fits into just about any kitchen. It's similar in size to a small, no-frills drip coffee machine.

Don't buy it if

You don't want to put in more effort than pressing a button

While brewing espresso with the De'Longhi Linea Classic Espresso Machine isn't hard, it's certainly not as easy as just popping in a pod or pressing the button on a fully automatic machine.

You want a super consistent taste

While the factors of water and pressure are taken care of for you, you still need to grind, measure, and tamp your coffee just right to get the best taste.

De'Longhi Linea Classic Espresso Machine: also consider

Breville Bambino Plus

This is one of the best espresso machines currently on the market. While pricier, this highly customizable machine makes amazing espresso and espresso-based drinks. In the UK, Breville products are known as Sage.

Read our full Breville Bambino Plus review

De'Longhi La Specialista Touch

This semi-automatic espresso machine has a frothing wand, coffee bean grinder, and a touch screen so you can make nine different custom drinks with the touch of a button.

Read our full De'Longhi La Specialista Touch review

How I tested the De'Longhi Linea Classic Espresso Machine

I brewed a bunch of espressos and made a few cappuccinos with the De'Longhi Linea Classic Espresso Machine over the course of several weeks. I carefully cleaned the machine before use and between each use. The coffee I brewed was De'Longhi's own espresso blend. I used filtered water from my refrigerator's water dispenser, refilling the water tank as needed. For the cappuccinos, I tried both low-calorie almond milk and whole dairy milk, cold from the refrigerator.

First reviewed April 2025

I’ve spent a few hours with the Insta360 X5 – and it feels like the most refined 360 degree camera to date

8:10 pm |

Author: admin | Category: 360 Cameras Cameras Computers Gadgets | Comments: Off

Insta360 X5: two-minute review

Almost precisely a year on from the launch of the Insta360 X4, its successor has arrived – and at first glance it’s hard to tell the difference. The two 360 degree cameras are near-identical in size, weight and shape, and it’s only a few aesthetic differences – plus, of course, the name emblazoned on the front – that enabled me to tell the new camera from the old once I’d pulled it out of its box.

The well-worn phrase “if it ain’t broke, don’t fix it” feels apt here, and it’s hard to blame Insta360 for not ringing major changes. After all, TechRadar’s glowing five-star review of the X4 dubbed it the best 360 degree camera on the market, and the company would have been unwise to ditch a winning formula. My early impressions of the X5, gleaned from a few hours of use, suggest that it has instead polished and honed where refinements are needed, finessing one superb and versatile camera into an even better and more flexible one.

Incremental improvements have been made across the board, but the headline progression I’ve really noticed has been in image quality. And yes, that’s a big one, brought about largely through the introduction of 1/1.28-inch image sensors. These are 144% larger than those on the X4, and they’ve been paired with a trio of image processing chips (or “AI chips” as Insta360’s marketing department calls them) for noise reduction, sharpening and other enhancements that, in theory, should make the image quality markedly better than the X4’s, particularly in challenging conditions like low light.

I’ve not had the chance to give it a go once the sun goes down just yet, but having taken the Insta360 X5 out for a morning test-run on foot and on my bike I’m more than happy with the general image quality. I’ve embedded the videos below, one of which was recorded at 5.7K 60fps with HDR, the other at the camera’s highest resolution of 8K 30fps, with no HDR.

I used the Insta360 app’s AI-powered automatic editor to create both videos before exporting them at 1080p and 1440p resolution respectively, and both at 30fps. I largely used the default settings here, but it’s worth noting that it’s possible to export at much higher bitrates than this if you wish, and at higher frame rates too provided your original recorded was captured that way.

I’ve been really impressed with the results so far. Sure, the conditions for my test were bright and sunny, so about as far from challenging as can be, but the levels of detail, rich colors, wide dynamic range and general all-round “pop” of the clips are wonderful – and they’re ready to be shared on social media right away, with very little in the way of editing or tweaking to do. Sure – a fully manually edited clip still beats the robo-editor’s take on things, and the tunes and templates provided here are a little cheesy, but those who want to put in the work to do things the old-fashioned way are still free to do so.

Technically, things look great too. There’s barely any sign of the stitch between the two planes, lens flare is minimal, and the selfie stick I was using has been artfully removed from view in signature Insta360 style.

I haven’t experimented much with audio yet, but Insta360 says the X5’s internal mics should be a major upgrade on the X4’s thanks to a built-in steel mesh wind guard plus software-based tweak like the new selectable Voice Enhancement mode, ideal for vlogging. I’ll be testing this fully in the coming days, but for now I’ll say that the above videos were captured on a quite breezy day on the coast and that wind noise is definitely still quite audible, if not overwhelmingly distracting.

Other things I’ve noticed in my initial few hours with the X5 are that its battery life can go down fast, particularly if you shoot in 8K. It also drained the battery of my iPhone 13 very quickly, while I was paired with it, using the companion app and editing and exporting footage. These are all very intensive tasks, so it’s not that surprising – but worth noting all the same.

Insta360 X5 specs

Image 1 of 3

Insta360 X5 action camera — (Image credit: Future | Sam Kieldsen)

Image 2 of 3

Image 3 of 3

Insta360 X5: Price and availability

Launched worldwide in April 2025
Standard edition costs $549.99 / £519.99 / AU$929.99
Essentials bundle available for $659.99 / £609.99 / AU$1,109.99

The Insta360 X5 is available to order from its launch day of 22 April 2025, and costs from $549.99 / £519.99 / AU$929.99 – which is only around 5-10% more than its predecessor the X4 cost when it launched in April 2024 ($499.99 / £499.99 / AU$879.99). That’s not too bad of a price jump given inflation and the uncertainty surrounding US tariffs.

That above price is for the standard bundle, which includes just the camera, but an Essentials bundle is also available and might make more sense for certain customers, especially if you’re just getting started on your 360 action camera journey. For $659.99 / £609.99 / AU$1,109.99, it offers the camera plus a second battery, fast charge case, 114cm invisible selfie stick, standard lens guards, rubber lens cap and carry case.

How I tested the Insta360 X5

Tested for two hours, full production model running early firmware
Camera mounted on invisible selfie stick
Recorded videos on foot and on a bicycle

I've only had a few hours to test the Insta360 X5, but as a frequent users of all its predecessors it felt immensely familiar so I was able to get out and shoot video with it almost immediately. I mounted it on the company's invisible selfie stick and shot short videos while walking and riding my bike during daylight hours. For the full review, I'll test it in different conditions, and try out its other shooting modes, including still photography.

First reviewed April 2025

I tested the ViewSonic VP16 OLED – see what I thought of this portable OLED monitor

1:40 pm |

Author: admin | Category: Computers Gadgets Pro | Tags: OLED | Comments: Off

This review first appeared in issue 345 of PC Pro.

There are dozens of 15.6in portable monitors available on Amazon, many costing around £100, so you may wonder why anyone would consider paying over four times that price for the ViewSonic VP16-OLED. The first clue is in the name: including an OLED panel rather than IPS immediately puts this display on a different pedestal.

But the real reason is quality. Cheap portable monitors usually reward you with poor color coverage, low brightness and lackluster color accuracy. What ViewSonic promises is much more in line with a professional monitor. With Pantone validation and a guaranteed average Delta E of less than two, you can be confident of the colors you see. This was borne out in the tests for our review unit, with typical averages of around 0.5.

I say “typical” because this monitor ships with numerous color modes: user, DCI-P3, sRGB, REC.709 and DICOM. DICOM is a medical standard, while REC.709 is used in broadcasting and similar to sRGB. That means it’s conservative in terms of coverage, so for the punchiest colors you should choose DCI-P3.

Full view of the ViewSonic VP16 OLED — **Inputs include two USB-C ports and micro-HDMI** (Image credit: Future)

When testing such profiles, we’re always looking for it to clamp down on the gamut as much as possible. That’s why it was comforting to see sRGB lock the panel to 96.4% coverage out of a 98.6% volume. So, only a tiny fraction of the colors you see on the VP16-OLED will sit outside the sRGB gamut when you’re in that mode.

Likewise in DCI-P3, where the monitor produced results of 95.4% and 96.9%.

It’s also easy to switch between profiles. ViewSonic places four buttons on the monitor’s base, and the text-based OSD is so simple to navigate that I was left wondering why all monitors don’t follow its lead.

Side view of the ViewSonic VP16 OLED propped up in its standard position — **Height adjustment in pictures. STEP 1 Here’s the ViewSonic in its most basic position** (Image credit: Future)

The panel’s only minor negative is that it isn’t a true 10-bit display but 8-bit plus FRC. FRC stands for frame rate control, and mimics colors not supported by the 8-bit panel by flashing alternate colors incredibly quickly. It’s effective, but purists prefer 10-bit panels.

ViewSonic has gained DisplayHDR 400 certification for this screen, but don’t expect images to burn your retina. Still, OLED is naturally easier to view in brighter conditions than IPS thanks to its “infinite” contrast ratio, so although the VP16-OLED peaked at 402cd/m²in our tests I can’t imagine any situation where you won’t be able to see its contents.

There’s even a hood in the box. This is normally included with professional monitors to stop ambient light interfering with colors, but here it’s most useful to keep the screen’s light from interfering with your darker shoots. I was also hoping it would offer protection during travel, but the folding mechanism isn’t quite clever enough to perfectly wrap around the screen.

Side view of the ViewSonic VP16 OLED raised to a moderate height — **STEP 2 Then, with a swivel of the stand, it’s raised a few inches** (Image credit: Future)

Otherwise, I can’t fault ViewSonic’s design. One of the cleverest elements is the adjustable height stand. The photos below tell most of the story; all I need to add is that it moves smoothly through every stage and locks perfectly into position.

The VP16-OLED doesn’t include a battery, but it can draw power from a host laptop over USB-C or work the other way round: plug in the supplied USB-C power supply and then power your laptop. However, it only delivers 40W, so it’s better suited to keeping a laptop topped up than charging it from empty. There’s also a micro-HDMI input.

Side view of the ViewSonic VP16 OLED set up in its tallest position — **STEP 3 And finally it’s at its peak height, elevated by around 100mm** (Image credit: Future)

ViewSonic includes a pair of 1W speakers, and as that power rating indicates they aren’t going to fill a room. Sound quality is mediocre – no depth, weak bass – but if you’re on a video shoot and want to check the audio they’ll be up to the job, or you can resort to the 3.5mm jack.

There’s one final downside to this monitor, and that’s its 1,920 x 1,080 resolution. Again, hunt online and you’ll find 4K portable monitors for half the price. Personally, I didn’t find this a problem in practice as text, photos and videos still look sharp at normal viewing distances.

For its target audience, then, this OLED monitor is worth every penny. It’s accurate, flexible and images pack a punch you won’t see from IPS rivals.

We also ranked the best powerful laptops.

I tried out the TP-Link Omada EAP655-Wall – read what I thought of this affordable wall-mount Wi-Fi 6 AP

1:36 pm |

Author: admin | Category: Computers Gadgets Pro | Tags: AP | Comments: Off

This review first appeared in issue 345 of PC Pro.

TP-Link’s EAP655-Wall is designed to offer discrete Wi-Fi 6 services to a wide range of environments, such as meeting rooms, apartments and home offices. This affordable palm-sized package will also appeal to hotels looking to provide in-room network services as it has three gigabit ports in its base and can deliver PoE on the third one – ideal for adding extra room devices such as IP phones.

The EAP655-Wall offers plenty of features for the price. This AX3000 dual-band access point (AP) delivers speeds of up to 2,402Mbits/sec on its 5GHz radio and 574Mbits/sec on the 2.4GHz radio. It also supports the high-speed Wi-Fi 6 160MHz channels, although the AP’s main uplink port is only the gigabit variety so you won’t see their full potential.

Even so, the EAP655-Wall delivered good overall results in our real-world performance tests. We started with its 80MHz channels enabled. Closerange copies of a large file between a Dell Windows 11 Pro workstation equipped with a TP-Link Archer TXE75E Wi-Fi 6E PCI-E card and a server on our 10GbE LAN averaged 94MB/sec, dropping to 77MB/sec with the AP moved ten meters away and into an adjoining room.

With the AP’s 160MHz channels activated, the workstation reported a 2.4Gbits/sec wireless connection. Unsurprisingly, our file copies maxed out the AP’s gigabit port and only increased to 111MB/sec at close range and 91MB/sec at ten meters, although these speeds will easily be good enough for all but the most demanding of users.

Full view of the TP-Link Omada EAP655-Wall — **The EAP655-Wall offers lots of features for the price** (Image credit: Future)

The AP can be managed in standalone mode, but most businesses will prefer TP-Link’s Omada cloud service as they can manage all their APs from one central web portal. Previously, each site required a hardware or software controller installed locally, but TP-Link now also offers cloud-based controllers with yearly prices starting at £12 per device.

From our main Omada cloud portal account, we viewed all our hardware, software and cloud-based controllers, and selecting the latter took us to its dedicated management console. Before adding the AP to our site, we made sure we’d enabled the cloud-based controller management option from its local web console. We could then import the AP by entering its serial number, naming it and assigning a license. After adoption, access to its local console was disabled and it started broadcasting our site-managed SSIDs.

The site portal presents a detailed dashboard that can be customized with widgets; we added ones to show details such as AP traffic and client distributions, the most active APs, a Wi-Fi summary and 24-hour graphs of client associations and overall wireless traffic. The AP was connected to the lab’s TP-Link TL-SG3210XHP-M2 PoE+ multi-gigabit switch, and we added more widgets to show its active ports, PoE usage and the available power budget.

Desktop screenshot of Omada's management options — **The AP can be remotely managed from TP-Link’s Omada platform** (Image credit: Future)

Wireless features are extensive, with up to eight SSIDs per radio supported and options to apply mixed WPA2/WPA3 encryption. You can set global or per client and SSID upload and download rate limits, and use guest networks to block users from private networks. Captive portal features are equally good, with profiles used to apply a global password, local user, voucher, Radius or Facebook authentication and add logos, greeting messages and acceptable use policies.

The three gigabit pass-through ports are enabled by default, and PoE services on the third port can be activated by checking this option in the portal’s AP configuration page, although make sure the main LAN port is connected to a PoE+ source. During testing, they worked fine and after connecting a Yealink IP phone to the third port, it duly received power and internet access.

It would have been good to see a 2.5GbE port, but the EAP655-Wall remains a reasonably fast Wi-Fi 6 AP with a good range. It offers a wealth of wireless features for a modest price, cloud management is excellent and its three gigabit downlink ports with extra power delivery make it even more versatile.

We've also ranked the best Wi-Fi extenders.

I tried the Qnap TS-262 – read what I thought of this NAS

1:29 pm |

Author: admin | Category: Computers Gadgets Pro | Tags: NAS | Comments: Off

This review first appeared in issue 345 of PC Pro.

Although one of Qnap’s home devices, the Qnap TS-262 is surprisingly well specified for a two-bay device. It has just the one Ethernet port, so no redundancy, but as it’s a 2.5GbE port rather than gigabit you avoid one potential bottleneck. Given that this standard is becoming more and more popular on consumer switches and routers, it’s nice to see this fast connection.

If you do need more speed, there’s a 10GbE port upgrade available via the PCI-E slot, which is accessible when the case is unscrewed. That’s the only time you’ll need a screwdriver, as everything else is accessible via screw-free entry.

For example, pop out both of the hard disk caddies and you’ll see that dual M.2 2280 NVMe PCI-E Gen3 slots are available. These use a simple clip to hold the SSDs in place, so are easy to deal with. Hard disks simply slide into the slot.

As with all Qnap NAS devices, the TS-262 runs its QTS operating system so is compatible with the full range of services that this provides, including the ability to create your own personal storage cloud. There’s an Intel Celeron N4505 processor and 4GB of RAM (non-upgradable), which should prove enough for even heavy use.

There are some extra features you don’t often find on rival NAS devices, including an HDMI 2.0 output. When paired with the compatible remote control, this NAS can be turned into a media streamer, playing video directly from its hard disk. If you have a large collection of films, this might be your best option, but a sleeker option is to install a media server and stream directly from the NAS.

Running over a standard gigabit Ethernet connection, the Qnap TS-262 fell behind the Synology DS723+, when we benchmarked using 22TB hard disks and dual 1TB NVMe drives. However, upgrade that connection to 2.5GbE and things get better, particularly with larger file sizes: running the ATTO benchmark with 2MB files, the TS-262 jumped from 100MB/sec read speeds to 210MB/sec.

There was little difference in the PCMark 10 Storage test, which uses different file transfers and is less dependent on connection speeds.

Synology’s systems are arguably easier to use, but if you want more straightforward file and media sharing, locally and via the cloud, then this NAS is excellent value and fast, particularly when its 2.5GbE port is used.

We've also rated the best Wi-Fi routers.

I’ve shot over 1,000 images on the new Nikon Z5 II, and it redefines what an entry-level full-frame camera can do

12:00 pm |

Author: admin | Category: Cameras Computers Gadgets Mirrorless Cameras | Tags: JPEG | Comments: Off

Nikon Z5 II: two-minute review

The Nikon Z5 II may be the ‘entry-level’ model in the brand’s most recent lineup of mirrorless bodies, but it’s by no means the stripped-down back-to-basics affair that its predecessor was. Nikon has conspicuously taken the body up a notch in terms of performance and features – and, for that matter, price.

It inherits the lion’s share of specs from the outstanding Nikon Zf, and subsequently it’s a fully-fledged hybrid shooter that excels in all but the most extreme of use cases. Notwithstanding its position in the Nikon range, don’t think of this as an entry-level camera – it’s anything but.

Nikon Z5 II product shot — The Nikon Z5 II with the Nikkor 24-50mm f/4-6.3 kit lens (Image credit: Future / Alex Whitelock)

At the heart of the Nikon Z5 II is the same Expeed 7 processor that's in the recent higher-end Z-series bodies. Subject detection? Check. Super-sticky 3D tracking? Check. In terms of autofocus, video, and meaningful quality of life changes, this camera blows away the original Z5 in every area.

If I had to nitpick, I would say that the almost 25% price increase over the Z5 is a glaring sore point for this camera. I do, however, think the massive jump in performance makes this camera worth every penny; you pay more, but you also get substantially more camera. If you've been eying up the Zf, but were put off by its hipster charms and questionable ergonomics, then the Z5 II is the clear choice here.

It's also, arguably, the top choice in the entry-level to mid-range full-frame mirrorless market right now. It's carefully placed just below the Z6 III in terms of burst rates and video specs, but compares favorably to the likes of the Canon EOS R8, Panasonic S5 II, and Sony Alpha A7 III. All have their merits, but the Nikon Z5 II offers a compelling blend of price and performance without any glaring compromises. In short, it beats its competitors on either price or specs – it really is well positioned.

As a stills camera in particular, it's hard to fault the Z5 II. You get a tried-and-tested 24.5MP back-side-illuminated sensor that's capable of excellent results, and 12fps raw capture. I'd also argue that this is one of Nikon's best cameras for JPEG shooters yet, thanks to the inclusion of the handy Picture Control button and support for sharing custom JPEG recipes via Nikon Imaging Cloud.

The video specs are a little weaker considering that 4K 60fps video is cropped, but the Z5 II is still capable of full-width 4K video up to 30fps – that's significantly better than the previous model.

In the rare cases where you need 6K video capture or quicker readout speeds, the Z6 III is likely a worthwhile upgrade. Otherwise, however, the Z5 II is going to be an absolute winner for most users. Sure, it's not a resolution beast like the Z8, nor is it particularly quick like the Z6 III; but the Z5 II is a superb camera in its own right, and one that's going to have mass appeal, even outside the Z-Mount ecosystem.

Nikon Z5 II: price and release date

The Nikon Z5 II body-only costs $1,699 / £1,599 / AU$2,699
Zoom kit bundles starting at $1,999 / £1,899 / AU$3,249
Roughly 25% more expensive than first Z5

At $1,699 / £1,599 / AU$2,699 the Z5 II arrives with a significant price jump over the first-gen model. At launch it’s roughly 25% more expensive than the first iteration, and the price difference is even more glaring considering that the Z5 has hit as low as $999 in the US in recent months.

Judged in terms of specs, however, the Nikon Z5 II is an aggressively priced body. I’ll elaborate more later, but the Z5 II is simply in a different league to its predecessor when it comes to both performance and features, and in my book this quantum leap softens the blow of the price hike significantly.

You could easily compare it to the most recent offerings from Canon R8 or Panasonic S5 II, but I’d argue that the Nikon is the more fully featured camera for the price. The R8, for example, is cheaper at $1,499 / £1,629 / AU$2,489, but forgoes IBIS and a second card slot. The S5 II is more comparable in term of specs, but it’s pricier in the US and UK at $1,999 / £1,699, and the Z5 II inherits the outstandingly refined subject-detect autofocus of the higher-end Z-Mount bodies.

The Z5 II is also well placed to compete with older mid-range models like the Sony Alpha A7 III. Sony’s former hybrid king is still available for new for around $1,799 / £1,679 / AU$2,000, and features a compelling mix of excellent autofocus, extensive lens choices, and specs that still hold up for enthusiast users.

It’s a testament to the A7 III that even in 2025 it remains a competitive choice, but the Z5 II finally gives customers a better option than Sony's seven-year-old camera in this price bracket. Sony’s traditionally killer USPs of autofocus and lens choice are less deadly to rivals now – and the Z5 II also features meaningful quality of life upgrades like a fantastic EVF, flip screen, and excellent IBIS. The Z5 II is so well featured that it’s hard not to recommend it, despite the unfortunate price bump.

Price score: 4.5/5

Nikon Z5 II: specs

Nikon Z5 II: design and handling

Similar design to the Nikon Z6 III
Fully articulating display
Picture Control button for JPEGs

Despite the Z5 II’s internal similarities to the Zf, outwardly the two cameras couldn’t be any more different. Nikon has returned to its modern design language with the Z5 II, and like its predecessor it essentially shares the same body as the most recent higher-end Z6 model, aside from that camera’s top LCD panel.

The Z5 II’s design is typically Nikon. It’s function over form, although the brand has made subtle tweaks compared to its previous generation of cameras. For one, the body is slightly thicker, and Nikon has also made a few changes to the EVF housing, which now sweeps around to the generously sized Z mount on the front. It’s a blink-and-you’ll-miss-it change, but the camera looks more modern for it.

The button layout is essentially the same as on the previous model, but there are some changes. The playback button and sequential shooting menu have been switched, for example, and there’s now a handy ‘Picture Control’ button to quickly access JPEG settings. Either way, everything is in the right place, and if you’re already a Nikon shooter you’ll feel right at home. Notably the grip remains the same; chunky, with plenty of purchase for when you're using larger Z-mount lenses.

Image 1 of 4

Image 2 of 4

Image 3 of 4

Image 4 of 4

As on the Z6 III, the top and back plates are made of a sturdy magnesium alloy, and you also get the large and bright EVF that’s typical for Nikon cameras. The EVF is the same 3.69k dot OLED panel as on the previous model, although Nikon says it can now reach up to 3,000 nits of brightness.

Perhaps the most meaningful design change for the Z5 II is the inclusion of a fully articulating display. Previously, the Z5 only featured a tilting display, so it’s nice to see the inclusion of a flip screen that’s particularly useful for talking-head scenarios. There’s some debate around whether a tilting screen is still superior, but I much prefer the fully articulating option personally in terms of versatility. Not only do you get that selfie and talking-head option, but the flip-out screen is great for getting low-angle shots in portrait orientation, plus it isn't partially obstructed by the viewfinder for waist-level shooting like the previous screen.

Image 1 of 2

Image 2 of 2

Ports-wise, the Z5 II features micro a HDMI port, plus headphone and microphone jacks, and USB-C with charging support. Unlike some budget models from the competition, notably the Canon R8, the Z5 II also features two card slots. You get support for two UHS-II cards here rather than the CFExpress Type-B combination that’s common on Nikon’s higher-end bodies, but it's still a fantastic inclusion for an entry-level camera. It’s also a nod to the Z5 II’s intended enthusiast target market, since the supported cards here are much cheaper than the CFExpress cards.

I'm grasping at straws to find a valid criticism of the Z5 II's design, but there are a few minor quibbles. The PASM dial, for example, doesn't feature the usual locking mechanism you find on higher-end bodies. It's a minor thing, yes, but it's easy to knock the dial out of your mode of choice, and it seems like an easy thing to rectify. Otherwise, the Z5 II is almost perfect in terms of function for a modern body.

Design score: 4.5/5

Nikon Z5 II: features and performance

Inherits subject-detection autofocus from high-end bodies
Now shoots 4K 30fps footage uncropped
12fps burst for raw / 30fps JPEG with pre-capture

The previous Z5 was an entry-level camera through and through. It was capable of capturing lovely images, sure, but pedestrian autofocus performance and lesser specs meant it was best consigned to rather sedentary subjects.

The Z5 II, however, is a significant leap in terms of performance. With an almost identical specs sheet to the mid-range retro-bodied Nikon Zf, the Z5 II is in a completely different class to its predecessor.

There’s really no other way to express it: the Nikon Z5 II is just a superb camera for the vast majority of applications. The 24.5MP back-side-illuminated sensor in combination with the Expeed 7 imaging processor means the Z5 II is an extremely capable body regardless of the price tag.

Readout speeds, while not up to the level of the Z6 III with its stacked sensor, are dramatically better now. The Z5 II supports raw burst rates up to 12fps versus its predecessor’s pedestrian 5fps. If you’re happy to go with JPEGs, then you can crank that up to 30fps, with additional support for pre-capture.

Image 1 of 2

Image 2 of 2

Video specs have also been improved significantly. The Z5 II now features full-width 4K footage at 30fps instead of the 1.7x crop of the Z5, and you also now get support for advanced formats like 12-bit N-RAW and 10-bit N-Log. Technically, the Z5 II can capture 4K at 60fps, but its 1.5x crop means it's still far behind the higher-end Z6 III when it comes to hybrid capabilities.

The two cameras do, however, share a lot of DNA, particularly when it comes to autofocus. The Z5 II inherits the various person, animal, and vehicle subject-detection capabilities from the higher-end Z Mount cameras, and is all the better for it.

Especially when compared to the older Z5 and Z6 models, the subject-detection autofocus is multitudes more effective here in all scenarios. On previous Z-mount bodies I was accustomed to having to manually steering the camera via tracking points or defined AF areas, but that’s not the case with the Z5 II.

Image 1 of 2

Nikon Z5 II next to the Nikon Z5 — The Nikon Z5 II has received a subtle redesign (Image credit: Future / Alex Whitelock)

Image 2 of 2

In testing, I found myself shooting with full-area continuous autofocus in the vast majority of scenarios, simply letting the camera do its thing. The Z5 II has no issues picking out people, birds, eyes, and moving subjects in crowded or otherwise demanding scenes. 3D tracking is also significantly stickier now, which is handy for the rare occasions when subject-detection fails.

In terms of price relative to performance, it’s extremely hard to fault the Z5 II here. Sure, it’s not the quickest camera from Nikon, or the prettiest, but it’s an extremely capable body that’s perfect for a wide range of users. The Z5 II really is a versatile camera that’s going to be a fantastic tool for the vast majority of enthusiast shooters.

Features and performance score: 4.5/5

Nikon Z5 II: image and video quality

24.5MP back-side-illuminated full-frame sensor
Now supports custom JPEG recipes
Internal 12-bit N-RAW and 10-bit N-Log video

The Z5 II’s sensor is a known quantity by now. It’s a sensor that’s been knocking around in Nikon cameras in some form or another since 2018. That’s by no means to its detriment, though, since this 24.5MP back-side-illuminated sensor is capable of providing incredible results across a wide range of subjects and scenarios. You could say it’s an old favorite, even.

I have a fair amount of experience with this particular sensor, having shot with the older Nikon Z6. So I was immediately at home with the Z5 II’s output, and I’m pleased to note that it’s more than capable of producing detailed images with pleasing color straight out of the camera. It’s hard to fault a sensor this good – there really aren’t any limitations aside from the relatively middling 24.5MP resolution limiting cropping potential in the most extreme circumstances.

Image 1 of 5

Nikon Z5 II Sample images — Images shot with the 24-50 and 24-200mm kit zoom lenses (Image credit: Future / Alex Whitelock)

Image 2 of 5

Image 3 of 5

Image 4 of 5

Image 5 of 5

If you can live with ‘just’ 24MP, then you’ll find the Z5 II’s output excellent – JPEGs in particular are fantastic. The image stabilization is rated at an impressive 7.5 stops – this sensor was already known as a low-light beast, but the image stabilization really adds to the camera’s night photography credentials.

Looping back to the Z5 II’s excellent JPEG output, it’s worth mentioning just how Nikon has significantly upped its game with the Z5 II. The camera now supports the new Nikon Imaging Cloud, which unlocks a much smoother image upload workflow and the seamless sharing of image recipes a la Fujifilm.

Given that my processing app of choice (Adobe Lightroom) didn’t support my pre-production Z5 II’s raw output, I quickly found myself tinkering with numerous JPEG presets. Switching between presets is extremely easy thanks to the dedicated Picture Control button on the top of the camera, and the interface also enables you to tweak various settings like sharpness, contrast, and clarity.

Image 1 of 6

Image 2 of 6

Image 3 of 6

Image 4 of 6

Image 5 of 6

Image 6 of 6

If I have a complaint, it’s that the various in-camera JPEG sliders are still rather basic, and the default profiles lack the polish of the likes of Fujifilm. The Nikon Z5 II, however, has a secret weapon in that it can store up to nine additional custom color profiles from the NX Studio app. This app fully supports color grading and other advanced options, so it’s perfect for really tailoring your JPEGs to match your raw workflow.

I imported a few presets onto my Z5 II, and was instantly able to get some superb results right out of the camera. The process is extremely smooth, and Nikon’s excellent in-camera retouch options easily allow you to test out your profiles on the various raw files already saved to your card.

Below are a few images showcasing what's possible with these in-camera presets.

Image 1 of 3

Image 2 of 3

Image 3 of 3

These presets can also be used for in-camera color grading, although advanced videographers will likely want to make use of the camera’s new internal N-Raw and N-Log formats for maximum flexibility and dynamic range. Generally speaking, video output is excellent here – especially with the oversampled 4K footage at 30fps.

If the Z5 II has any weaknesses when it comes to video, they're generally down to the sensor's middling readout speeds. Aside from the 1.5x crop at 4k 60fps you also get some rolling shutter when panning quickly, as with most bodies without a stacked sensor. If you want a more fully-featured and modern video platform, it could be worth investing in the higher-end Nikon Z6 III.

While we’re here, it’s worth mentioning the number of excellent lenses that are ready to pair up with the Z5 II. While the Z-Mount supports plenty of high-end glass, even modest choices like the Nikkor 24-50mm f/4-6.3 kit lens are capable of providing great results. My favorite lenses for the Nikon Z5 II in particular are the super-lightweight Nikkor 40mm f/2 and Viltrox 85mm f/1.8, both of which are great lower-cost lenses that pair perfectly with the Z5 II.

Most of the example images you can see here were shot with either those two lenses or the Nikkor 24-200mm f/4-6.3 zoom, which is another kit option for the Z5 II.

Image and video quality score: 4.5/5

Nikon Z5 II: testing scorecard

Should I buy the Nikon Z5 II?

Buy it if...

You want a great-value all-rounder
The Nikon Z5 II is fantastic jack-of-all-trades camera for a competitive price. It's a great choice if you want something that nails both photo and video without breaking the bank.

You're looking to upgrade
If you're already shooting with an older Z-mount body or even a Nikon DLSR then there's a strong argument for upgrading to the Z5 II. The autofocus in particular provides a massive jump in performance over the older bodies, even the higher-end Z6 II.

Don't buy it if...

You want a retro design
The Nikon Z5 II is almost identical to the Nikon Zf when it comes to performance and specs, so the latter is the obvious choice if you prefer a more retro look.

You need advanced video features
The Z6 III provides more headroom in terms of high-resolution video with its support for 6K/60p N-RAW.

You need resolution
The Z5 II's 24.5MP sensor isn't a high-resolution beast like the higher-end cameras in Nikon's lineup. If you need massive cropping potential there's the older Nikon Z7 II, pricier flagships, or look elsewhere.

Nikon Z5 II: also consider

Panasonic Lumix S5 II

The Lumix S5 II is another competitively priced full-frame body that offers a viable alternative to the Nikon Z5 II if you're looking for something more video-centric. The S5 II is capable of open-gate 6K / 30p recording at 10-bit, which gives it the edge for resolution and cropping video. That said, the Z5 II is cheaper at full list price, and inherits the outstanding autofocus from the higher-end Nikon Z-Mount bodies.

Read our in-depth Panasonic Lumix S5 II

Nikon Zf

On paper the Nikon Z5 II and Nikon Zf are extremely similar cameras in terms of performance. In form, however, the two couldn't be more different, with the Zf sporting a gorgeous retro design. If you'd prefer the same specs in a more classic, nostalgia-themed body, the Nikon Zf is the obvious choice. Expect to pay a little extra for the pleasure though.

Read our in-depth Nikon Zf

How I tested the Nikon Z5 II

Nikon loaned me the Z5 II and some lenses for two weeks
I tested it with the 24-50mm and 24-200mm kit zooms
I also used the Nikon 26mm and 40mm and Viltrox 85mm primes
I carried the camera daily, testing its video and photo capabilities
I shot over 1,000 images with the camera

I used the Nikon Z5 II as my everyday camera over a two-week period, which gave me the chance to shoot more than 1,000 images and videos. I was able to test the subject tracking, low-light performance, and image stabilization effectively thanks to using the camera in a diverse range of environments, both indoors and outdoors.

Nikon sent me the Nikkor 24-50mm and f/4-6.3 Nikkor 24-200mm f/4-6.3 zoom kit lenses to try, as well as the Nikkor 26mm f/2.8. I also made sure to use the camera with a third-party lens, in this case the Viltrox 85mm f1/.8.

First reviewed April 2025

Andor season 2 is a devastating near-masterpiece that rebels against the argument that Star Wars has passed its peak

7:00 pm | April 21, 2025

Author: admin | Category: Computers Disney Plus Gadgets Streaming | Tags: Star Wars | Comments: Off

This is a spoiler-free review of all 12 episodes of Andor season 2.

There's no question that Andor season 2 is one of my most anticipated shows of 2025. Ever since Disney announced the release date for Andor's second and final season last November, I've been counting down the days until the critically acclaimed show's return.

In the two and a half years since the Star Wars TV series' first season ended, my excitement levels have only grown. That could've presented a problem if, like many a crashed starship in the famous galaxy far, far away it inhabits, the political spy thriller didn't stick the landing with its second and final installment.

Join me in breathing a sigh of relief, then, that it does. Andor season 2 is a near-masterpiece that, a couple of faults aside, cements the show's position as the best piece of Star Wars live-action media since the original movie trilogy.

Rebel leaders, standing by

Dilan, Cassian, and Enza searching for something in a tunnel in Andor season 2 — Andor season 2 takes a different storytelling approach to its predecessor (Image credit: Lucasfilm/Disney Plus)

Initially picking up events after its predecessor's finale, Andor season 2 takes a different storytelling approach to the Disney+ series' first outing.

Where season 1 followed its ensemble cast across a single year, this season's 12-episode run is divided into four trilogy-style events. Each three-episode block depicts a specific event within the four years leading into Rogue One: A Star Wars Story – the 2016 film that connects Andor to Star Wars Episode IV: A New Hope.

Andor season 2 is... the best piece of Star Wars live-action media since the original movie trilogy

Previously described as "very sexy" time jumps by showrunner Tony Gilroy, episodes 1 to 3 cover three days, four years before Rogue One happens. Then, chapters 4 to 6 depict a week-long event three years out from the aforementioned movie. Next, entries 7 to 9 tackle a 14-day period two years before the Gareth Edwards-directed flick. Finally, episodes 10 to 12 take place in the five days leading up to Rogue One.

With both seasons reportedly costing an eye-watering $645 million, it's clear Disney, which has tightened the purse strings during Bob Iger's second stint as CEO, wanted to wrap up this expensively-assembled program.

That's bad news for fans who loved Andor's first season and craved more of its thrilling, character-driven storytelling. It also presented a creative conundrum for Gilroy and company to overcome – how to cram four seasons' worth of character evolution and plot progression into a dozen episodes.

Mon Mothma standing in front of Luthen Rael and Perrin in Andor season 2 — Mon Mothma is as integral to Andor's story as the titular character (Image credit: Lucasfilm/Disney+)

Some teething problems in season 2's first act notwithstanding, it's a storytelling approach that, hesitant though I was over how well it'd work, I actually warmed to. Sure, season 2 is fast-paced at times (I'll get into this more later as part of my wider criticism of this season), but the beauty of its four-year cycle is its ability to show the ever-evolving nature of the show's key relationships at annual intervals.

Be it friendships, romances, uneasy alliances, or another type of interpersonal dynamic, season 2's multi-year plot approach – one largely devoid of filler material – highlights the rollercoaster ride that each one goes on.

Sure, character dynamics can change within TV show seasons whose events play out over weeks and months rather than years. It's a process that worked wonders for Andor's first season, but armed with its multi-year format, the series' sophomore outing not only demonstrates how its tentpole moments impact these relationships but also the in-flux nature of its core dynamics in all of their soul-stirring, melodramatic, and tear-jerking glory.

The beauty of this season's four-year cycle is how it showcases the ever-evolving nature of the show's key relationships

Predictably, a lot of the shifting dynamics revolve around Cassian Andor (Diego Luna). As the show's titular character, season 2 takes a purposeful approach to examining the ebb and flow of his personal associations.

Indeed, there's underlying tension, occasional levity, and soul-piercing drama to the bonds he shares with those he's closest to and works for, as well as clear affection and/or respect amid the oft-times messiness of these dynamics. Understandably, that includes ones he has real stakes in, with Bix (Adria Arjona), Luthen Rael (Stellan Skarsgård), Wilmon (Muhanned Bhair), and, as confirmed by an appearance in Andor season 2's first trailer, his eventual android bestie K-2SO.

Bix and Cassian putting their foreheads together in Andor season 2 — Bix and Cassian's relationship dramatically shifts as season 2 plays out (Image credit: Lucasfilm/Disney Plus)

That said, while the series bears his name, season 2 is as much, if not more so, an ensemble piece than its predecessor was. (By the way, it's worth watching the season 1 finale again, or streaming last season's 14-minute recap, to refamiliarize yourself with the sheer number of characters in the show. My head was spinning throughout season 2's opening salvo as I tried to remember who everyone was, what they were doing, and where they were!)

Fascinated though I was by Cassian's relationships with some of Andor season 2's cast, I found myself more hooked by the politically dicey dynamics involving Mon Mothma (Genevieve O'Reilly), who's arguably this season's stand-out. She's certainly the most interesting character in season 2's first act and, spoilers notwithstanding, episode 9 fully cements O'Reilly's place as one of the finest actors to grace the Star Wars universe.

The engrossingly uncomfortable dynamic between Galactic Empire officers Dedra Meero (Denise Gough) and Syril Karn (Kyle Soller) that slithers with reptilian delight, plus the compelling expansion of Luthen's fraught surrogate-style relationship with Kleya (Elizabeth Dulau), are equally worthy of praise. I never tired of seeing these particular dynamics play out and, given another season or three, I'm sure they would've been even more intoxicating to watch.

Heirs to the Empire

Dedra Meera standing in a hallway in Andor season 2 — Denise Gough's Dedra Meero is captivatingly unlikeable once more in the show's second season (Image credit: Lucasfilm/Disney Plus)

Season 2 successfully navigates its expansion of, and call backs to, the wider Star Wars galaxy, too.

There is, despite what Gilroy previously suggested, some character and plot-based winks to the camera, but they're not as egregious as references in other Star Wars projects.

In fact, whether it's the return of Rogue One's main villain Orson Krennic (Ben Mendelsohn), who steals scenes with his terrifying unpredictability, or subtle nods to Star Wars Episode III: Revenge of the Sith and Rogue One itself, they're easily forgivable inclusions that actually enhanced my viewing experience.

Orson Krennic looking at someone off-screen in Andor season 2 — Ben Mendelsohn reprises his role as Death Star overseer Orson Krennic in Andor's final season (Image credit: Lucasfilm/Disney Plus)

The addition of new worlds also expands on the grandeur of Lucasfilm's vast galaxy, which the Galactic Empire dominates during this time. The live-action debut of one planet is especially key as it allows for the exploration of an emotionally devastating event that should also clear up fan confusion over said incident's Star Wars canonicity.

I won't tease much else about it for those with little knowledge of wider Star Wars lore. Believe me when I say, though, that season 2 episode 8, which showcases this event in such soul-crushing fashion, might be the best – if that's the right word to use – chapter since the season 1 finale. If nothing else, it certainly rivals last season's 12th episode for sheer emotional impact, and I'm not afraid to admit that I shed a tear or two as its end credits rolled.

Season 2 episode 8... rivals last season's 12th episode for sheer emotional impact

If there was a problem with one of the best Disney+ shows' final season – and this might slightly contradict what I wrote earlier – it's the condensed and at times rushed feel of some of its four acts.

I appreciate it's been a costly endeavor for Disney. I also understand that showrunner Tony Gilroy had the unenviable task of compressing four seasons' worth of content into the show's last installment. So, the fact that he achieved this seemingly impossible task should be applauded.

Syril Karn wearing an ISB suit in Andor season 2 — The compelling character complexities of Kyle Soller's Syril Karn are on full show in season 2 (Image credit: Lucasfilm/Disney+)

Still, the sheer number of narrative hoops that season 2 has to jump through, the quick-paced nature of some three-episode events, and the occasional sidelining of important supporting characters make this season feel a tad scattershot in its storytelling approach.

Act 1, for instance, feels largely untethered and tonally different from its fellow volumes. The severe cuts between scenes are often jarring, while the lack of narrative and character-based pay-off delivers an abrupt end to season 2's opening three-part chapter. It comes across as a standalone trilogy that feels out of place among its brethren.

It's not the only act marred by niggling issues. Act 4 is more closely connected to acts 2 and 3 than act 1 is, and plays the role of direct link to Rogue One. However, it's a little on the short side, and I'll admit I was expecting a bit more suspense or shock value in a three-parter where the Rebel Alliance finally learns about the Death Star.

Don't get me wrong, some moments are genuinely thrilling, dramatic, action-packed, and heart-wrenchingly sad, and I certainly wasn't unsatisfied with how season 2 ends. Indeed, its final scene will make you view Rogue One in a whole different light. I just think that, with a few extra minutes here and there, act 4 would've been even better than it was.

My verdict

Andor season 2 is a devastating and epic tour de force – one filled of potent political drama, weighty ethical dilemmas, and captivating character introspection – that rebels against the notion that Star Wars is a dead franchise walking.

In my view, nothing comes as close to matching the awe, shock value, and prestige nature of the original films – which turned Lucasfilm's iconic sci-fi universe into the powerhouse franchise it is today – as this epic and expertly crafted show.

Would it be even better as a three-season event (a Star Wars trilogy, you say?) comprising eight episodes apiece to fully explore its characters, their dynamics, the impact of their decisions, and help things feel less rushed? Yes, but this is the hand that Gilroy and company were dealt, and there's no debate that they've pulled off an almighty task in making one of 2025's new Star Wars shows as breathtakingly good as it is.

In my Andor season 1 review, I labeled it "a blood-pumping spy thriller that might be the best Star Wars shows yet". Now, I'd replace "might be" with "is". If Disney learns anything from Andor, it's that there's an entire galaxy's worth of more mature, creative, and original stories that deserve to be explored.

The question now is: will the House of Mouse be brave enough to pursue similar ideas? If it does and they're as good, if not better, than Andor, I'll be a Star Wars devotee for a long time yet.

Andor season 2 launches with a three-episode premiere on Tuesday, April 22 (US) and Wednesday, April 23 (UK and Australia). Three new episodes arrive each week until the show's finale in mid-May.

I tested these open earbuds and I never, ever want to use them again

6:00 pm |

Author: admin | Category: Audio Computers Earbuds & Airpods Gadgets Headphones | Comments: Off

Happy Plugs Clip: two minute review

The Happy Plugs Clip are a pair of open ear headphones that really surprised me – but not in the way I'd hoped. These clip-on buds are bizarre in the sense that they don’t really nail anything in particular. They’re a jack of few trades and a master of absolutely none.

Usually I’d start by talking about sound quality, but I want to instead start with design – because these have a quirk I’ve not encountered before. After you open up the admittedly attractive charging case, you’re met with the two open earbuds which are… upside down? Yes, after picking these out of their charging vessel, I realized that the ‘L’ and ‘R’ symbols on the left and right bud were the wrong way up. That means that each time you go to put them on (or go to put them back), you need to mess around a fair bit to get them in your ear – not sure how that one got past the drawing board.

Anyway, the buds themselves look a little cheap – perhaps to be expected given their list price of $49 / £50. They’re also quite large compared to some other clip-style open earbuds I’ve tested, though they only weigh 5g each, which is lighter than even some of the best open ear headphones.

I found them to be fairly comfortable, though a tad loose-fitting, which made it a little challenging to find the perfect fit. On top of that, these things use touch controls, but they activate with a single touch, meaning I often accidentally paused music or adjusted volume by mistake when trying to get them to stay put. However, if your ear shape works with them, said touch controls do let you control a fair amount, including music playback, calls, power status and even your source device’s voice assistant.

And one final point on design – Happy Plugs call the Clip ‘sweat resistant’ but don’t specify their waterproof rating. I wouldn’t expect that it’s any higher than IPX4 with that description, which is a little disappointing when you consider that other budget models like the Huawei FreeArc, are IP57-rated.

But anyway, let’s get onto the main event: audio performance. Unfortunately, this is one of the worst areas for the Happy Plugs Clip. You’re going to get thin, unbalanced, sometimes harsh sound out of these, which is going to be a problem for almost anyone. For instance, when listening to Una canzone d’amore per te by Pino D’Angio, the 80s style percussion sounded tinny – unlistenable at high volumes – with the lead saxophone lacking separation from other instrumental elements.

How Much I Feel by Ambrosia also had an almost muffled tone throughout. The soundstage was cluttered and percussion through the treble frequencies again sounded grating. It’s safe to say I was excited to go back to my usual LG Tone Free T90S earbuds.

You won’t get good bass response out of the Happy Plugs Clip either – and I'm taking into account their open design, where bass clout is always a potential issue. When tuning into Black Eye by Allie X, the deep drum machine was hugely understated, stripping the track of its impact, rhythmic bounce and groove. The only time I really got a serviceable listen out of these open earbuds was when listening at low volumes, when the harsh, muddied nature of its sound was considerably tempered. But who wants to listen to music so quietly in a set of open ear headphones?

Happy Plugs Clip in charging case — (Image credit: Future)

So, it’s safe to say that these lack star quality in the sound department, but there’s always an opportunity for a solid feature-set to redeem things, at least slightly. However, that is something that the Happy Plugs Clip don’t possess either.

Firstly, there’s no companion app, so you won’t get dedicated EQ settings, adjustable noise cancelling, customizable touch controls or… anything really. There are a couple of features available to you, though. First of all, these highlight ambient sounds if you’re on the go. For instance, it was easier for me to hear a child screaming in a supermarket, which some open ear fans may be looking for. I wasn't exactly loving that experience, though.

Secondly, these have two inbuilt mics, intended to facilitate “clear calls”. That was something I didn’t experience, however. When making a video call and a standard phone call, I was told that my voice sounded pretty muffled and less clear than when using my phone’s built-in microphone. I also recorded a voice note and heard a whole lot of sibilance, which was pretty unpleasant.

Unfortunately, even the battery life of the Happy Plugs Clip is sub-par. On the front of the box, you’re told you get 20 hours from these. And in a sense, that’s true. If you count the additional battery life supplied by the charging case, you’ll be able to get a total of 20 hours from these. But really, you’re getting 4.5 hours per charge, which is – to be blunt – simply bad. When we reviewed the Honor Earbuds Open, we described their six hour battery life as “limited”, so, yeah… nothing to shout about.

An additional issue worth considering, is that like most open ear headphones, these are pretty prone to sound leakage. So, if you're out in public and have your tunes cranked up a little too loud, expect a few glares to come your way – although you likely won't do that, because of that troublesome treble.

All in all, the Happy Plugs Clip fail to make a splash in the ever-expanding ocean of open ear headphones. They struggle to deliver across the board, with unsatisfying sound quality, a weak feature-set, unimpressive design and restricted playtime. The only real draw of these is, of course, their price. The bulk of the open earbuds market does sit closer to that $100 / £100 mark, it's true – but it’s well worth spending that bit extra, and I hope you'll trust me on this.

Take a step up to the sub £100 Huawei FreeArc, for example, and you’re getting great audio, superior waterproofing and more features – more on those later. Otherwise, I highly recommend checking out some cheaper options in our guide to the best wireless earbuds – if you activate Ambient Sound mode on the ultra-cheap Sony WF-C510, for example, you’ll hear surrounding noise and still get superb audio.

Happy Plugs Clip review: specs

Reverse side of Happy Plugs Clip charging case showing USB-C port — (Image credit: Future)

Happy Plugs Clip review: price and availability

$49 / £50 (about AU$80)
Launched in January 2025

The Happy Plugs Clip launched in January 2025 alongside a handful of other products, including the Happy Plugs Joy Speaker. They have a list price of $49 / £50 (about AU$80) which is comfortably in budget tech territory, but of course, you’re not getting great quality in return. It’s worth noting that these are available in either Black or White, but the color you pick should have no bearing on the price you pay.

Happy Plugs Clip on stone surface with charging case — (Image credit: Future)

Should you buy the Happy Plugs Clip?

Buy them if...

You want a more relaxed fit
There aren’t many reasons to recommend the Happy Plugs Clip, but one thing going for them is their open design, which is ideal if you’re the active type. That’s because they let in a lot of ambient noise, so if you want to have the measure of your surroundings, they’re more effective than ANC-enabled wireless earbuds.

You’re looking for a lightweight option
Each of the Happy Plugs Clip’s buds weigh only 5g – that’s pretty light compared to much of the competition. If you’re fed up with weighty wired earbuds or bulky over-ears, these might be a better fit.

Don't buy them if...

You care about audio quality
Even if you’re not an audiophile, I think you’ll pick up on the sonic shortcomings of the Happy Plugs Clip. You get thin, muffled audio that’s grating at high volumes. And you don’t have to settle for that, even for this money. If you’re not so set on the open design, you can check out our guide to the best cheap wireless earbuds for some ace alternatives.

You want plenty of playtime
The Happy Plugs Clip can only manage 4.5 hours of playtime per charge, which isn’t very good to be honest. You get 20 hours in total with the charging case, but if you’re a keen listener, you’re gonna be charging these quite often.

Happy Plugs Clip review: also consider

Anker Soundcore AeroClip
The Anker Soundcore AeroClip are a great pair of open ear headphones that nail the clip-on look. They supply impressive sound quality, a comfortable fit and excellent companion app compatibility. Sure, there’s no ANC on offer and their IPX4 waterproof rating could be better, but they’re still well worth checking out. Read our full Anker Soundcore AeroClip review.

Huawei FreeArc
If you’re a UK customer, we strongly recommend taking a look at the Huawei FreeArc. They serve up great audio, wonderful waterproofing and a neat design. Again – no ANC here and battery life could be a touch improved, but for less than £100, they’re an absolute steal. Read our full Huawei FreeArc review.

Happy Plugs Clip review: How I tested

Person picking one earbud out from Happy Plugs Clip charging case — (Image credit: Future)

Tested for one week
Used in the office and while out and about
Predominantly tested using Tidal

I tested the Happy Plugs Clip for one week and spent hours listening to music, watching videos and making phone calls. Most of the time, I used these in the office at Future Labs, but I also used them while out and about in busy areas.

When listening to music, I used the Tidal app on my Samsung Galaxy S24 FE. I also ensured that I ran through the TechRadar testing playlist, which includes tracks from a range of genres and is optimized for judging sound quality across the frequencies. In addition, I played a ton of tunes from my personal library. Where appropriate, I compared these to the Soundcore AeroClip on aspects such as sound quality, battery life and design quirks.

First reviewed: April 2025
Read more about how we test

The Amzchef Slow Juicer SJ-036 delivers great results with any fruit or veg (though it can’t make me love kale juice)

3:00 pm |

Author: admin | Category: Computers Gadgets Home Juicers & Blenders Small Appliances | Tags: Australia, UK, US | Comments: Off

Amzchef Slow Juicer SJ-036: one-minute review

The Amzchef Slow Juicer SJ-036 is frankly a joy to use. Easy to assemble, use, and clean, this masticating slow-press juicer provides consistent, excellent results. If you want a juicer with a bunch of bells and whistles, you won't find it here. Instead, this appliance focuses on providing high-performance features, like its auto hopper, non-drip spout, and powerful auger, which reduces the need to pre-cut fruit and veg (though you may need to cut some) and allows for it to be largely automatic – with minimal mess.

You can add large chunks of food to this juicer, which makes prep easy, but the user manual advises removing seeds and peels from foods like oranges, lemons, and melons. After prepping, you simply add your food to the juicer, lock the lid, and turn the knob on the side, ensuring the pulp and juice cups are under their respective spouts. The juicer then uses its power auger to juice your items, pushing the solid fiber and pulp out the side, while its triple filter ensures the juice left is smooth. I found the auger left minimal residue in the feeding cup and it is incredibly satisfying watching the pulp ooze out the side.

Interior of Amzchef Slow Juicer SJ-036 — (Image credit: Vic Hood)

While you can leave the appliance to automatically juice your food, you may need to utilize the pusher accessory to push down some foods – I only needed to do this once, however – or use the knob's Reverse function if any food gets stuck. You also need to watch for when the juicing is completed, as the appliance doesn't automatically turn off when finished and is surprisingly quick due to its 250W motor. In most cases, my juicing was complete in one to two minutes, though tougher foods took up to six.

Control dial on Amzchef Slow Juicer SJ-036 and cleaning brush — (Image credit: Vic Hood)

The overall result every time was smooth juice with minimal pulp, enough to be healthy but not enough to make the juice unpleasant. That powerful auger utilized nearly every element of what it was fed, with the pulp spout churning out mostly solid remains that indicate it squeezed almost every ounce of juice from my foods. Clean-up was equally impressive, with the detachable parts easily hand-washed with only water.

If you're looking for a no-nonsense slow juicer that provides consistently high results, the Amzchef Slow Juicer SJ-036 is a worthy investment.

Amzchef Slow Juicer SJ-036: price and availability

Price: $299.99 / £199.99
Available in the UK and US, but not Australia
Regular discounts available

The Amzchef Slow Juicer SJ-036 is a premium cold press juicer. Available in the US and UK at $300 / £199.99, respectively, this appliance is pricer than several others on our best juicers list. So, if this is a bit out of your price range, the Amzchef Slow Juicer ZM1501 is a more affordable alternative. However, we regularly see discounts (up to $100) on this product, so it's worth keeping your eyes peeled during sales periods.

While the Amzchef Slow Juicer SJ-036 is pricey, it's worth the investment if you regularly juice, as it offers a high-quality masticating juicer that's easy to use and maintain.

Value score: 4.5/5

Amzchef Slow Juicer SJ-036: specifications

Amzchef Slow Juicer SJ-036: design

Stylish modern design
Surprisingly tall, needs unobstructed counter space
Powerful auger and auto hopper
Triple filter for smooth juice
Anti-drip spout

The Amzchef Slow Juicer SJ-036 has a stylish, minimalistic modern design and comes in black or silver. Assembly is straightforward thanks to the handy user manual. You attach the juicing bowl to the power base, followed by the auger, and then the feeding cup, which locks into the bowl with ease. You then add the juice cup under the juice spout on the front and the pulp cup under the pulp spout on the left-hand side. The feeding cup lid has a safety clock, which you can click open and close fairly easily. The juicer won't function if the lock isn't clicked in, as this indicates the top is open, a welcome safety inclusion that should prevent any kitchen disasters.

Image 1 of 2

Amzchef Slow Juicer SJ-036 auger — (Image credit: Vic Hood)

Image 2 of 2

Amzchef Slow Juicer SJ-036 auger after juicing kale — (Image credit: Vic Hood)

What I like most about this juicer is how seemingly simple its design is and how easy it is to operate. On the right-hand side is just one knob with three options: on, off, and reverse. There's no smart control here, simply turn it on to juice and off when it's done. You need to manually turn it off when the juicing is finished, so an automatic option would be helpful, but this method does give you more control over its operation.

Turning the appliance on is when you see how impressive the design is. The automatic hopper pulls food into the powerful squeezing auger, churning it to extract the juice before using the triple filter to separate the pulp from the juice, satisfyingly spewing the pulp out of its respective spout and holding the remaining juice. The no-drip juice spout means the juice stays put until you've turned the appliance off and you're ready to open it. The juice spews out pretty fast, so I advise opening it slowly to avoid splashback.

Amzchef Slow Juicer SJ-036 brush and pushing tool — (Image credit: Vic Hood)

Cleaning, likewise, is easy. The user manual advises handwashing with (it seems) just water and a cleaning brush is provided for tougher residue. Largely, I only needed the brush for the filter and chutes, with remains in the detachable parts easily washing away under the tap.

It's worth noting, however, that this juicer stands pretty tall when assembled, at 17.2in. Plus, you need to account for opening the lid. So, I had difficulty opening it due to my upper kitchen cabinets and needed to move it to a counter space that wasn't vertically obstructed. This may not be ideal if you have a smaller kitchen.

Design score: 5/5

Amzchef Slow Juicer SJ-036: performance

Smooth juice with minimal pulp
Discarded pulp is largely solid
Only takes a few minutes to juice
Consistently good results

The Amzchef Slow Juicer SJ-036 performs to a high standard and I found it near flawless during my testing. I first tested a green juice, consisting of broccoli florets, ginger, celery, an apple, pear, and parsley. While the apple and pear needed de-seeding as advised in the user manual, and the celery cut into smaller chunks to fit the chute, minimal prep was required and all the ingredients easily fit in the feeding cup.

Green juice and pulp from Amzchef Slow Juicer SJ-036 — (Image credit: Vic Hood)

Within about two minutes of turning the appliance on, 197g of fairly solid pulp had been extracted and I was left with around 375ml of clear juice with minimal foam. Only some small remnants of parsley snuck into the juice, but these weren't overly noticeable or unpleasant. Very little was left in the juicing bowl that wasn't pulped or juiced. I was impressed that – while fairly loud at a max volume of 85.5 decibels – this juicer wasn't

I was particularly impressed with how the appliance juiced 200g of unpeeled carrots. The result, again, was 100ml of crystal clear juice with no foam, which only took one minute. This one minute is fairly loud, with a max decibel reading of 85.5, but wasn't as ear-splitting as some juicers can be.

Carrot juice and pulp from Amzchef Slow Juicer SJ-036 — (Image credit: Vic Hood)

Orange juice, using five large oranges, took a slightly longer six minutes, however. Mainly because I tested whether adding each ingredient one by one results, as Amzchef says in its juicer tips, in a higher yield. I didn't see a noticeable difference, so it's really up to you whether you'd rather juice more efficiently or quickly.

I added the oranges (unadvisedly) with their peels on but cut into wedges. This resulted in a lot of pulp (411g) and roughly 375ml of delicious orange juice, which had some nutritious pulp in it but not enough for it to be an issue.

Pulp and kale juice from Amzchef Slow Juicer SJ-036 — (Image credit: Vic Hood)

Much like with my carrots, my 100g kale test resulted in wonderfully pure kale juice, with just a little foam. Unfortunately, I didn't realize how disgusting kale juice is and this juicer couldn't fix that.

Performance score: 5/5

Should you buy the Amzchef Slow Juicer SJ-036?

Buy it if

You want to spend less time on food prep

While some foods need to be cut up for size or their seeds removed, this juicer can handle whole foods with ease, minimizing the need for pre-cutting and prep.

You want a non-nonsense juicer

This appliance may not have the bells and whistles of other juicers, but it does what it's meant to do to a high standard.

You want an easy to maintain and operate juicer

This slow juicer is a breeze to assembly, use, and clean. So, if you want an appliance that's easy to use out of the box, look no further.

Don't buy it if

You've less kitchen space

This is a surprisingly tall juicer and I had trouble opening it when it was placed on a counter under kitchen cabinets. The most optimal space for this is a counter that's unobstructed vertically, so if you're lacking that you may have some difficulty finding a place to use it conveniently.

You're on a budget

This is a premium product, but it also comes with a premium price tag. While regular discounts are available, you can get great slow juicers for less than this. So, if the $300 / £199.99 price tag is out of your budget, there are plenty more options available that provide solid performance.

First reviewed April 2025

I’ve tested countless gaming chairs and the brilliant AndaSeat Novis could be the best budget option yet

3:00 pm |

Author: admin | Category: Computers Gadgets Gaming | Comments: Off

AndaSeat Novis: One-minute review

This chair is good. No seriously, it might not look like much, but for the price it's exceptional. You're looking at $200-250 for the regular or XL variant, and for that, the Novis absolutely nails what a good gaming chair should be.

What makes this one of the best gaming chairs around then? Simply put, it's stupidly comfortable to sit in. The padding in the seat base and the bolsters is absolutely next level. It's covered in a faux leather-like PVC material, but overall comfort is top-tier.

The backrest has lumbar support built into it; it's non-adjustable but it's enough to keep you comfortable through long gaming sessions or during the work day, and the overall feel and style are up there. It's not too gamer-y, nor is it too corporate. It treads a fine line between the two, with the only issue being the potentially a little too intense branding.

It's not perfect, of course; AndaSeat has had to cut back on a number of features and build elements to bring the price down. The armrests, particularly on the XL model I tested, are a little too small, and you don't get any included lumbar or headrest pillows (they're optional extras instead), plus the overall frame has been slimmed down a bit to shave off some material cost, but for what you're paying, that's more than acceptable.

The Novis hits the mark, not because it has some fancy gimmicks or outlandish design, but because it nails the basics and does so with an incredible price point attached to it. It's that simple. This is unabashedly one of the most comfortable gaming chairs I've ever tested, and that's saying a lot.

A close up of the AndaSeat Novis. — (Image credit: Future)

AndaSeat Novis: Price and Availability

List Price: $250 (around £210)
Only available direct from AndaSeat.com
PVC leatherette and Cloth versions

If you're looking to actually grab one of the world's most affordable gaming chairs right now, I've got some bad news. Unfortunately, it's seemingly only available via AndaSeat directly, and right now the release is limited to the US.

I have no doubt it's coming to other regions at a later date (Europe, likely once various health and safety legislation has been met), but for the time being it's a web store exclusive.

That's likely been done again to shave a bit of cost off the overall price tag. I'd suspect the margins for AndaSeat are so low on these things that having to fork out extra cash to Amazon for the privilege of listing it might be a step too far.

But the thing is, though, it's that pricing that really cements the brilliance of this thing. There are effectively four models on offer. You've got the L-size for folk between 155-190 cm and up to 90 kg, and the XL size (featured in this test) for 165-210 cm up to 120 kg.

Within that, there's a choice of either a premium PVC leather option or alternatively, you can opt for a linen fabric instead that comes in a sleek "Ash Gray" finish, looking equally stellar. The standard L size comes in at $200 regardless of material, and the XL is $250.

Another nice addition to the whole affair is bizarrely something that AndaSeat's excluded from the overall package. In this case, that's the lumbar support and headrest pillow. You can actually buy these as optional extras, either as a package together for $59 or individually at $39 each.

To be honest, I would like to see those prices reduced somewhat (they're high for what they are); however, it's quite nice that they're optional extras and that additional manufacturing cost has been removed from the initial outlay.

AndaSeat Novis: Specs

Andaseat Novis: Design and Aesthetics

No drama
Sleek PVC Leather
Basic armrests

With that pricing in mind, you probably wouldn't expect too much from it. $250 for a gaming chair and a lot of cash these days, certainly with the likes of Noblechair's Legend and Secretlab's Titan Evo kicking around in the big leagues.

Yet the Novis actually delivers quite the package. In its PVC leather form, it's clean, slick, and simple. There's no drama outside of a few embroidered logos. It's a bucket seat design out of the gate, with some fairly simple clean stitching and comfortable bolsters running along the slides.

Unlike with the Kaiser line, there are no dramatic colorways to choose from, just black for the leather and grey for the cloth, and that's about it.

It's comfortable enough, and if you put this in a room with 30 other gaming chairs, you'd be hard-pressed to place it at that $200 mark, which honestly is high praise. It's only when you start to look under the hood that you begin to notice some of the features that have been cut back to really nail that budget entry cost.

The AndaSeat Novis next to a desk. — (Image credit: Future)

AndaSeat Novis: Comfort and adjustability

Armrests need work
Adjustment is incredibly limited
Wildly comfortable, even compared to the Kaiser

Flip this thing over during the construction, and you'll spot immediately that there's just one lever. You don't have that lock-out lever for the tilt mechanism.

Instead, it's constantly unlocked. That said, it's very rigid, and although you can technically tilt back on it, it requires some serious force to shuffle it back by that 15 degrees.

Then there's the armrests (always a bit of a sticking point for AndaSeat). I will say these are more functional than the 5D armrests found on the Pro line with the Kaiser 3 series and the Kaiser 4, but that comes with some major caveats.

Unfortunately, you can only adjust them up and down. There's no rotation, no pivot, and no sliding forwards and backwards. That wouldn't be that big of an issue if it wasn't for the fact that they're remarkably small, measuring just 9.8" (25cm) long and 3.1" (8cm) wide. Even for a smaller human like myself at 5'8.5" (174cm) and 165lbs (75kg) actually resting my arms on them during use is a bit awkward at times. They're not awful though, and they do work relatively well. Perhaps better suited to the smaller "L" sizing.

Then there's the seat itself, and it is wildly comfortable; there's no denying it. AndaSeat's cold-cure foam is out of this world. Squishy, supportive—it's just luscious. The added 2.5" (5cm) raised bolsters on either edge and the subtle angling on those and the backrest bolsters just add to the overall luxurious feel and allow it to compete, certainly on a comfort level with those far costlier flagships out there.

One minor complaint: the PVC leather, although durable, does lack some breathability compared to alternatives out there. In part due to its synthetic nature. It could use some perforations or some form of patterning to relieve some of that glossy, sweaty feel.

I've been testing a lot of graphics cards and systems lately, my office has hit 95F (35C) on a few occasions, and it's made the Novis particularly sticky during those moments. Less than ideal. Still, it's an all-round epic chair, and for the cost, it's hard to beat.

The armrests of the AndaSeat Novis. — (Image credit: Future)

AndaSeat Novis: Assembly

Quick and seamless
Very standard process
Minimal components, minimal fuss

So, easy to build? Yeah. If you've built a few gaming chairs over the last decade or so, you'll get along with this just fine. Unlike with the AndaSeat X-Air there's no complex hydraulic cambling to do or anything along those lines.

You chuck the castor wheels into the base, the piston into that, attach your armrests and seat base mount to the underside of the seat, pop that on the piston, then attach the backrest to that, and wrap-up with the side bolt covers.

AndaSeat reckons you're better off installing the backrest to the seat base first before mounting it on top of the gas piston, but honestly, I found it easier to do it the way listed above, as it reduces the overall weight and doesn't take any longer.

You'll notice there's no frills around it, though. Unlike some other options, there's no subtle chrome badging you need to plug in, or flappy paddles, or anything along those lines really. The only minor annoyance is attaching the armrests, but again, it's so cheap and affordable and takes such little time to attach them that it's really not worth complaining about.

Unlike with the Kaiser 3 Pro XL, it didn't have any trouble with the bolts or securing anything into position either on this sample, just happy sailing, and in less than 20 minutes I had a gaming chair up and built.

Should You Buy The AndaSeat Novis?

Buy it if...

You want to save a lot of cash
This is by far the best budget gaming chair I've ever seen. It nails what every gaming chair should; it's comfortable, easy to construct, supports you well, and is durable as all heck.

You're not interested in fancy gimmicks
5D armrests you'll tinker with once then ignore forever? Nah, not here. Tried and true methods make this a simple chair to use and cut down the price too.

Don't buy it if...

You're on the heavier side
XL in all but name, unlike with the Kaiser 3 XL, the XL version of the Novis lacks some of the top-tier support capability it had, and only supports folk up to 125 KG in weight 275 lbs.

You want more colorful picks
Black or grey, that's it; that's your lot here, and if you want pillows, that's extra too.

Also consider...

Not interested in an astoundingly good budget gaming chair? Fancy something with a bit more punch? Check these awesome options out instead.

Noblechairs Legend
With exceptional style, the Noblechairs Legend might be pricey, but it's the ultimate sophistication in gaming chairs, with a big bulky design combined with plenty of comfort, chrome details, and enough colorways to keep up with some of the big boys too.

For more information, check out our full Noblechairs Legend review

Secretlab Titan Evo 2022
It's the king for a reason, and yes, although it might be significantly more than the Novis, the Titan Evo 2022 delivers some exceptional quality for that price, with insanely high-quality materials and a ton of mod-cons that make it a surefire pick for anyone on the hunt for the ultimate gaming chair for their office.

For more information, check out our full Secretlab Titan Evo 2022 review

How I tested the AndaSeat Kaiser 3 Pro

Sat in it for two weeks total
Tested in all manner of working positions
Hand built solo

I spent two weeks with the Novis XL getting to grips with it. Particularly challenging being slightly shorter than the recommended numbers. I also got friends and colleagues to sit in it too, to judge just how good it was, and then collated that information into my own review as well.

I've also had a ton of experience with the entirety of AndaSeat's range at this point, which has given me particularly good insight into how it operates and which features and models it has at its disposal.

De'Longhi Linea Classic Espresso Machine: two-minute review

De'Longhi Linea Classic Espresso Machine: price and availability

De'Longhi Linea Classic Espresso Machine: specs

De'Longhi Linea Classic Espresso Machine: design

De'Longhi Linea Classic Espresso Machine: performance

Should you buy the De'Longhi Linea Classic Espresso Machine?

Buy it if

Don't buy it if

De'Longhi Linea Classic Espresso Machine: also consider

How I tested the De'Longhi Linea Classic Espresso Machine

Insta360 X5: two-minute review

Insta360 X5 specs

Insta360 X5: Price and availability

How I tested the Insta360 X5

Nikon Z5 II: two-minute review

Nikon Z5 II: price and release date

Nikon Z5 II: specs

Nikon Z5 II: design and handling

Nikon Z5 II: features and performance

Nikon Z5 II: image and video quality

Nikon Z5 II: testing scorecard

Should I buy the Nikon Z5 II?

Buy it if...

Don't buy it if...

Nikon Z5 II: also consider

How I tested the Nikon Z5 II

Rebel leaders, standing by

Heirs to the Empire

My verdict

Happy Plugs Clip: two minute review

Happy Plugs Clip review: specs

Happy Plugs Clip review: price and availability

Should you buy the Happy Plugs Clip?

Buy them if...

Don't buy them if...

Happy Plugs Clip review: also consider

Happy Plugs Clip review: How I tested

Amzchef Slow Juicer SJ-036: one-minute review

Amzchef Slow Juicer SJ-036: price and availability

Amzchef Slow Juicer SJ-036: specifications

Amzchef Slow Juicer SJ-036: design

Amzchef Slow Juicer SJ-036: performance

Should you buy the Amzchef Slow Juicer SJ-036?

Buy it if

Don't buy it if

AndaSeat Novis: One-minute review

AndaSeat Novis: Price and Availability

AndaSeat Novis: Specs

Andaseat Novis: Design and Aesthetics

AndaSeat Novis: Comfort and adjustability

AndaSeat Novis: Assembly

Should You Buy The AndaSeat Novis?

Buy it if...

Don't buy it if...

Also consider...

How I tested the AndaSeat Kaiser 3 Pro

Recent Posts

Archives

Categories

Tags