Organizer
Gadget news
Samsung Galaxy S25 to only use Snapdragon chips, Fold7 and Flip7 get Exynos 2500
5:46 pm | September 2, 2024

Author: admin | Category: Mobile phones news | Comments: Off

There's been a lot of back and forth in the past few months regarding the chipset(s) that will power Samsung's upcoming Galaxy S25 family, due to launch most likely in January. First we heard that it would be an Exynos-only affair, then two separate reports told us to expect Snapdragon everywhere. Now another rumor, from Samsung's home of Korea, confirms the Snapdragon win. The Galaxy S25, Galaxy S25+, and Galaxy S25 Ultra will all allegedly use Qualcomm's Snapdragon 8 Gen 4 globally. This has apparently been done to "maximize the performance" of the S25 series. The Exynos 2500 will...

HMD Hyper leaks in new colors
4:49 pm |

Author: admin | Category: Mobile phones news | Comments: Off

We saw the first leak for the upcoming HMD Hyper last month with a pretty detailed spec sheet accompanied by a render of the device in yellow. The same source @smashx_60 on X.com has now shared additional renders for the upcoming device in its four official colors alongside some new specs clarifications. HMD Hyper is billed as a successor to the Nokia X30 which launched in 2022 but with a design more inline with the more recent HMD Skyline with a mix of curved lines and sharp corners. We also get to see three additional colors, next to the yellow one which leaked previously. These include...

Smeg BCC13 review: perfectly extracted espresso and foamed milk every time
4:00 pm |

Author: admin | Category: Coffee Machines Computers Gadgets Home Small Appliances | Comments: Off

Smeg BCC13: one-minute review

The Smeg BCC13 is a fully automatic bean-to-cup espresso machine with an automatic milk frother, which produces consistently well extracted coffee time after time.

The BCC13 is built to a very high standard, with thoughtful touches like an easy to access dump bucket for grounds; refill, cleaning, and descaling alerts; and smooth interior surfaces that are a piece of cake to keep clean. The machine warns you whenever refilling or cleaning is necessary, and a quick clean cycle of its milk and dispenser system takes just one minute from start to finish.

It has presets for nine different drinks, plus hot water for making tea, and you can tailor the length of lattes, cappuccinos, and americanos to suit the size of your cups. The most popular drinks are available with a single tap of the buttons on top of the machine, and less common options can be accessed by holding a button to access a secondary menu. It's not always immediately obvious which button relates to which drink, so you may find yourself relying on the quick start guide for the first week or so, but you'll soon get the hang of it.

Smeg BCC13 coffee maker with milk system attached

This is the first machine in the BCC series with an automatic milk frothing system (Image credit: Future)

This is the first coffee maker in the BCC series with an automatic milk frother, and it works extremely well. Just pour your milk into the robust container (which has an airtight lid so you can store it in the fridge), immerse one end of the rubber tube, and gently push it into place on the side of the dispenser. The BCC13 produces thick, creamy foam for cappuccinos and lattes, and the milk is heated enough to break down the lactose for a delicious, sweet foam without ever being scalded.

It doesn't work well with plant-based milks (even barista ones), but that's typical for a coffee maker with an automatic frother and Smeg does warn you that results won't be the same as they are with dairy. If you enjoy oat or soya in your lattes and cappuccinos, you might prefer to opt for one of Smeg's coffee makers with a manual steam wand, which give you total control. Our guide to the best espresso machines includes lots more options to check out.

Smeg BCC13: price and availability

  • List price: $1,200 / £799.95 / AU$1,199
  • Launch date: July 2024
  • Availability: global

The Smeg BCC13 launched in July 2024, as a successor to the Bean to Cup BCC02. It has a list price of $1,200 / £799.95 / AU$1,199, and although it was only available in the UK initially, it can now be bought worldwide.

That's more than the BCC02, which retailed at around $1,000 / £680 / AU$970 depending on the retailer, but the price increase isn't huge considering the BCC13 has been upgraded with a fully automatic milk frother.

Bean-to-cup machines always carry a premium price tag, but the BCC13 certainly isn't the most expensive coffee maker of its type. The De'Longhi Dinamica Plus is an excellent machine, but at $1499.95 / £1199.99/ AU$1529 , it's beyond the budget of all but the most serious espresso lovers.

If you're on a tighter budget, I recommend considering a manual espresso machine like the Breville Bambino Plus, which retails at $499.95 / £399.95 / AU$649. There's more of a learning curve and you'll need a separate coffee grinder, but it's half the price and earned four and a half stars from our reviewer.

  • Value score: 4.5/5

Smeg BCC13 coffee maker preparing a cappuccino

The BCC13 heats milk enough to break down lactose for a sweet foam that never tastes scalded (Image credit: Future)

Smeg BCC13: specs

Smeg BCC13: design

  • Sleek, modern look
  • Thoughtful touches for easy cleaning
  • Drink option buttons need a reference guide

The Smeg BCC13 looks almost identical to the BCC02, but instead of a steam wand permanently attached to the front, it has a removeable rubber hose for its automatic milk steaming system. It's a stylish machine, with a smooth black, white, or emerald green case and a brushed aluminum front. 

The dispenser on the front slides up and down with a smooth motion to accommodate different cup sizes, and has a port in the side for the milk hose. You can remove the milk pumping system by opening the front of the dispenser and pulling the unit out for cleaning.

Coffee beans are loaded into a hopper on the top (the BCC13 will warn you when it's empty) and there's a large water reservoir at the back, with a carry handle so you can easily take it to the tap or use a filter jug to refill it. The reservoir has a generous maximum capacity of 47.34oz / 1.4L, so it doesn't need refilling often, and the machine will automatically purge the water line when the reservoir is re-inserted,

Smeg BCC13 coffee maker with full water reservoir removed

The reservoir is generously sized and well designed, with a sturdy carry handle that makes it easy to remove from the back of the BCC13 (Image credit: Future)

A side door in the machine allows you to access the machine's brew group, which will sometimes need cleaning to remove buildup of coffee grounds. Just press the buttons on the side of the group unit, then gently pull to remove it. Once it's out, you can simply rinse it under a tap to get rid of buildup, then give it a dry with a tea towel before replacing it.

You'll receive a warning from the machine when the brew group needs cleaning, and a light will illuminate on top if you've accidentally left the panel off.

Smeg BCC13 coffee maker with side panel removed

The machine has a removable side panel that lets you access the brew group for cleaning (Image credit: Future)

The drip tray slots onto the front of the machine, and you'll receive a warning when it's starting to get full. It has a generous capacity so it doesn't need emptying too often, despite the machine's automatic purging function, and like all parts of the BCC12, it feels robust and durable.

Used grounds are dropped into a convenient waste caddy at the bottom of the machine, which you'll find by removing the drip tray and sliding out a drawer. The caddy holds up to seven pucks of used espresso, and again, the BCC13 will warn you when it needs emptying. The caddy simply lifts out, and you can wash it using dish soap and water.

Smeg BCC13 coffee maker grounds drawer removed from unit

Used grounds drop into a caddy in the bottom of the machine, and the machine will warn you when it needs emptying (Image credit: Future)

A set of five buttons on the top of the machine let you choose the type of drink you'd like to make. When they are illuminated white, you can pick from espresso, coffee, hot water for tea, cappuccino, and latte macchiato. Pressing the slightly larger button underneath them will switch the lights to orange, and let you choose
espresso light (a less extracted shot), long coffee, americano, espresso macchiato, or foamed milk.

It's obvious what some of the buttons will do from the icons alone, but until you've used the machine for a few days, you'll probably need to consult the quick start guides included in the packaging to remind you what each ones does.

The final button, on the right, starts the machine's quick clean cycle. It will flash after you use the BCC13's milk frothing system, prompting you to fill the cleaning container with water, insert the end of the hose, and press the button for three seconds to purge the system. Dirty water will be flushed out, leaving the machine ready to use again next time.

You can carry on making drinks without performing the cycle, but I timed it, and the process only takes one minute from start to finish.

Woman pressing button on top of Smeg BCC13 coffee maker

You have a choice of nine drink types, plus hot water for tea. The button at the bottom serves as a 'shift' button on a keyboard, letting you pick a secondary option (Image credit: Future)

The machine is supplied with a sturdy milk container with a maximum capacity of  500ml / 16oz, which has a rubberized lid so you can store it hygienically in the fridge when it's not in use. It's easy to clean by hand with dish soap and warm water.

  • Design score: 5/5

Smeg BCC13: performance

The appeal of a premium bean-to-cup coffee maker is consistency, and the Smeg BCC13 excels, creating perfect shots of espresso with thick, rich crema every time. You can tinker with the grind size if you like, but I found the default settings produced a well extracted espresso with no adjustment. The entire process of brewing an espresso took 1:04 minutes from pressing the button to completion, and the BCC13 reached a maximum volume of 67dB (though most of the brewing process was much quieter).

I carried out our regular test of an espresso by placing a teaspoonful of demerara sugar on top. It sat for a few seconds before sinking through the crema, which is a sign of a good shot.

Smeg BCC13 coffee maker pulling an espresso shot with thick crema

Espresso has a rich, thick crema every time, and is consistently well extracted (Image credit: Future)

The inclusion of a hot water setting is a welcome addition that we don't see with all fully automatic espresso machines, and means you don't need a kettle for brewing tea. The foamed milk feature is also thoughtful, providing a babyccino on demand (just dust on some cocoa when it's done).

The built-in milk frother is very consistent, producing thick and creamy foam for cappuccinos and lattes. Milk was never overheated either; the BCC13 warms it enough to break down the lactose for a sweet taste, without scalding it. As with the well extracted coffee, the results are the same time after time, with no manual alterations necessary.

Depending on the size of your cups, you may want to adjust the volume of lattes, cappuccinos, and americanos by changing the amount of milk or water dispensed. You can do this by holding down one of the drink selection buttons until you hear a tone, then pressing the button again once the machine has dispensed the right amount. The BCC13 will save this preset for future use.

If you want to stop dispensing the current drink early, you can do so by tapping the drink selection key. This won't affect the presets.

Whole milk latte made using Smeg BCC13 coffee maker, with a teaspoon of foam removed

Scooping out a spoonful lets you see just how much foam the BCC13 can produce for a latte macchiato (Image credit: Future)

The only real downside is that the Smeg BCC13 can't handle plant milks particularly well. Smeg's documentation advises that although you can steam non-dairy alternatives using its machines, you'll get better results with cow milk, and that certainly proved to be the case. A cappuccino made using barista oat milk had barely any foam on top (as shown in the picture below), and the machine overheated the milk rather than incorporating air. Smeg does warn you about this, and it's standard for a machine with an auto milk frother, so the BCC13 doesn't lose marks for it.

If you want to use oat, soy, almond, or coconut milk to make drinks then you may be better served by the Smeg BCC02, which has a manual steam wand so you can adjust the pressure and use your own technique to get the right texture. Alternatively, you could opt for the BCC01 espresso machine, which has no steam feature at all, and pick up a standalone milk frother like the Dreo BaristaMaker, which has presets for plant milks.

Cappuccinos made using Smeg BCC13 coffee maker with oat milk (left) and dairy milk (right)

Smeg warns that plant milks may not froth as well as dairy milk, and it's not wrong - an oat milk cappuccino (left) had barely any foam compared to the same drink made with full-fat dairy (right) (Image credit: Future)

Fully automatic coffee makers are wonderfully convenient when you just want to make a drink with the minimum of fuss, but the moving parts mean they tend to be more of a hassle to clean than a manual machine. Thankfully the BCC13 keeps that to a minimum by prompting you to carry out regular cleanup tasks so things never get too messy.

You will be promoted to purge the dispenser and tubing each time you use the milk frother, which is sensible and prevents buildup of bacteria. When the quick clean button flashes, fill the square cleaning container with plain water, place it under the dispenser, and insert the end of the milk tube. Hold the button for three seconds and the machine will flush its whole dispensing system with hot water and steam, and pump the resulting waste into a reservoir in the cleaning container. It's impressive just how much it cleans out each time. 

Smeg BCC13 coffee maker after running quick cleaning cycle

You'll be prompted to run a quick cleaning cycle after using the automatic milk frother (Image credit: Future)

A few stray coffee grounds inevitably end up falling inside the machine as it works, but not too many, and they're easy to clean up. The bottom of the BCC13 is easy to access with the drawer pulled out, and its smooth interior surface means you can use a brush or a piece of kitchen towel to wipe it out in a few seconds. The whole machine is made and finished to a very high standard, and there's nowhere for stray grounds to get trapped.

  • Performance score: 5/5

Should you buy the Smeg BCC13?

Buy it if

You value ease of use

The Smeg BCC13 is fully automated, and is the easiest way to enjoy freshly ground and brewed coffee from bean to cup. It will deliver consistently good results time after time, with little to no tinkering required on your part (just a little cleaning when prompted).

You make several coffees daily

The BCC13 is a big investment, so you'll need to be frequent coffee drinker to justify the expense. Making a drink can take as little as one minute from start to finish, so it could be a real time-saver if you usually brew up several times during the day.

Don't buy it if

Coffee-making is your hobby

This is a fully automated machine, so there's not too much space for taking things into your own hands. Smeg also produces some great manual espresso makers (like the stylish EMC series, which you should check out if you like the look of the BCC13 but enjoy the full home barista experience.

You enjoy plant-based milk

As Smeg says, the BCC13 works best with dairy milk, and doesn't handle plant-based alternatives nearly as well. If almond, soy, oat, or coconut is more your thing, you could opt for an espresso machine with a manual steam wand that gives you full control, or skip the steamer altogether and opt for a standalone frother like the Dreo BaristaMaker, which has presets for plant milks.

Smeg BCC13: also consider

If you're not sure about the Smeg BCC13, here are a couple of other options to think about:

Smeg BCC02

If you like the sound of the BCC13 but you enjoy plant-based milk, the slightly older BCC02 would be a great option. It has a steam wand rather than an automated frother, putting you in control of the heat and air integration - and it costs a little less as well.

Read our full Smeg BCC02 review

Casabrews 5700Pro

This machine has its own grinder, and will help with weighing and dosing, but you get more of the barista experience by putting you in control of adjusting the grind size, tamping the grounds, and pulling the shot. The biggest downside is that it's only available in the US at the time of writing.

Read our full Casabrews 5700Pro review

How I tested the Smeg BCC13

I had the Smeg BCC13 on loan for two weeks, during which time I used it to make all sorts of drinks using high quality medium roasted Brazilian espresso beans, and compared them to the same drinks made using a manual Gaggia Classic machine.

I tested the BCC13's automatic milk frother using both chilled whole dairy milk and barista-style oat milk, and compared the results with those created by foaming milk with a manual steam wand.

Smeg BCC13 coffee maker with bag of espresso beans

I tested the BCC13 using Brazilian Arabica coffee beans (Image credit: Future)

I measured the volume of the machine throughout the brewing process using a decibel meter app on my phone, and used my phone's timer to see how long it took to brew a drink and complete a quick cleaning cycle.

Read more about how we test.

First reviewed August 2024

Tecno confirms IFA participation, new smartwatch and TWS earphones may be coming
3:46 pm |

Author: admin | Category: Mobile phones news | Tags: | Comments: Off

The IFA or Industriale Funkausstellung Berlin will take place between September 6-10, and today Tecno announced its participation at the exhibition. The company will showcase its "new AI strategy and AIoT offering," the announcement confirms. Most of the products that will be at the booth were already unveiled at MWC 2024 in Barcelona, like the Pocket Go handheld console with Windows and the robot dog Dynamic 1. Jack Guo, GM of Tecno, said that developing an AI-powered ecosystem has been a key part of the company's strategy. We already know that Tecno wants to infuse its future HiOS...

Redmi Buds 6 Lite announced
1:26 pm |

Author: admin | Category: Mobile phones news | Comments: Off

Xiaomi announced a new pair of affordable TWS buds with the Redmi Buds 6 Lite. These feature 12.4mm drivers, active noise cancelation (ANC) and a total battery life of 38 hours with their charging case. Buds 6 Lite feature an in-ear design with removable silicone tips and connect via Bluetooth 5.3. ANC from the buds is rated at up to 40dB and they also feature call noise cancelation thanks to their dual microphones. The buds also support EQ adjustments via the Xiaomi Earbuds app. Total playtime is rated at 38 hours with the charging case and 7 hours from the buds. Redmi Buds 6...

Huawei to unveil tri-fold phone on September 10
12:29 pm |

Author: admin | Category: Mobile phones news | Comments: Off

Huawei scheduled a "grand ceremony" for September 10 where it will reveal new products. The main poster depicts a triple-fold device with two opposing hinges, meaning the new smartphone is really coming in September, just like the CEO promised. Another teaser hinted at a new version of the Aito M9 electric vehicle with five seats instead of six. We could also see the rumored Watch GT 5 and Watch D2 with the newly announced TruSense hardware. Huawei invitation for September 10 Huawei has kept the new groundbreaking device under wraps, and we know virtually nothing about it, aside...

Oppo A80 makes official debut in Australia
11:31 am |

Author: admin | Category: Mobile phones news | Tags: | Comments: Off

Oppo is continuing the global rollout of its A80 midranger which has now made its way to Australia. The device is actually a rebrand of the Oppo A3 Pro which launched in India this June with the same core specs and design. Oppo A80 in Moonlight Purple and Starry Black Oppo A80 features a 6.67-inch IPS LCD (HD+ 120Hz), a Dimensity 6300 chipset and a 50MP main cam. The device boots ColorOS 14 based on Android 14 and packs a 5,100 mAh battery with 45W fast charging. Oppo A80 comes in Moonlight Purple and Starry Black colors. The baseline 8/256GB trim is priced at AUD 369...

Final D7000 review: huge planar magnetic over-ear headphones that, when properly driven, deserve their huge price-tag
11:30 am |

Author: admin | Category: Audio Computers Gadgets Headphones | Comments: Off

Final D7000: Two-minute review

It goes without saying that $3499 / £2999 / AU$5899 is an awful lot of money to consider spending on a pair of wired over-ear headphones – and yet you’re almost spoiled for choice here, as our best wired headphones guide proves. What sets the D7000 apart, though, is that Final Audio has gone to town where the technology of planar magnetic headphones is concerned, and consequently has a pretty compelling story to tell.

It’s developed something it calls an ‘air film damping system’ to overcome the low-frequency limitations of the planar magnetic driver technology. It’s created a ‘pinna-aligned diffuser’ to overcome the variations in the shape of the human ear. It’s gone so far as to build its own manufacturing and assembly jigs in order to keep the entire construction process in-house and under its control. It's not a stretch to say that Final's need to get the science of bringing sound to your ears just right borders on obsessive.

The D7000 is far from the most cooperative headphone this sort of money can buy, so you’ll need to spend more – on a headphone amplifier with a fair bit of grunt. But if you’re able to drive the D7000 effectively, there’s a lot to enjoy about the sound. 

Final D7000 headphones outside, on a sunny day

Yes, the case is huge (Image credit: Future)

Final D7000 review: Price & release date

  • Released February 27, 2024 
  • Priced $3499 / £2999 / AU$5899

The Final Audio D7000 are available to buy now, and have been since the end of February 2024. A price of $3499 / £2999 / AU$5899 lets you know the company is not messing around with this model, and it also lets you know that alternatives from the likes of Focal (see the May-launch Azurys), Grado (see our Grado Hemp review) and Meze Audio (that would be the Meze Audio Liric) are firmly in Final Audio’s sights.

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Final D7000 review: Specs

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Final D7000 review: Features

  • ‘Pinna-Aligned Diffuser’ 
  • ‘Air Film Damping System’ 
  • Not the easiest headphones to drive

Wired headphones seldom bristle with features – and the Final Audio D7000 are no different in that they have what they need to get the job done and nothing else. But it’s fair to say that Final Audio has applied itself to these features rigorously.

For instance, the company has addressed the inherent problems planar magnetic drivers have in producing properly low frequencies by developing something it calls an ‘Air Film Damping System’. If you play at significant volume, the movement of the diaphragm when it’s delivering bass information can be exaggerated to the point that it contacts the magnets that are driving it – which obviously is undesirable. Final Audio suggests that a) every other planar magnetic design consequently doesn’t dig as deep into the frequency range as is ideal, and b) it has solved the issue. 

A necessarily complicated system involving perforated metal shields suspended on either side of the diaphragm creates a layer of air between the diaphragm and its magnets - it acts as a braking system and allows the diaphragm to generate the desired low frequencies without the danger of contact with the magnets around it. The diaphragm itself is thin and light even by prevailing standards, and has a super-thin spiral-pattern aluminum coil etched onto it.

The other major feature here is the ‘Pinna-Aligned Diffuser’. The concept of acoustic adjustment via diffusion has been gaining traction for some time – but Final Audio feels it has identified, and subsequently solved, an important issue: the shape of the wearer’s pinna. The pinna (the shape of the outer ear) obviously varies widely from person to person, and it can significantly affect a headphone listening experience. Final Audio’s listening tests, using both real live ears and simulations, have resulted in a diffuser shape that is, according to the company, optimal for every listener regardless of the shape of their pinna. 

The driver arrangement has resulted in a headphone with an impedance of 50Ω and sensitivity of 89dB/mW – this translates to ‘quite difficult to drive’. It seems likely that anyone spending the thick end of three grand on a pair of headphones is not going to connect them directly to a laptop headphone socket or something like that – but equally, these numbers suggest a sturdy headphone amp will be a necessity.

The amount of oomph that’s likely to be required to drive the D7000 makes the supplied cable seem slightly odd. It’s three meters long, for starters, which is far from the most practical length, and is terminated in an unbalanced 6.3mm jack – which is not the most helpful (or premium) option. At this sort of money it’s not unreasonable to expect a variety of cables, in a variety of lengths, with a variety of terminations – a 4.4mm balanced jack, for instance, would help the headphone amp into which it’s plugged deal with the rather tricky load the D7000 present.

  • Features score: 4.5/5

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Final D7000 review: Sound quality

  • Tremendous powers of insight and analysis 
  • Open, organized and utterly believable sound 
  • Could quite easily be more dynamic

In many ways, the sound the Final Audio D7000 make is approaching ideal – or, at least, it is for someone with similar sonic priorities to mine. If you admire high detail levels, nicely neutral tonality, a beautifully balanced frequency response and a big, well-organized soundstage, then we have something in common. And you’ll no doubt enjoy the D7000 as much as I do.

A big 24bit/96kHz FLAC file of Weyes Blood’s Grapevine is exactly the sort of thing the Final Audio excel at dealing with. Their carefully judged tonality gives a touch of warmth to the acoustic instruments and the staggeringly direct and informative midrange, and their response from the bottom of the frequency range to the top is impressively even. The hard work Final Audio has done in an effort to liberate dynamic driver-type levels of bass extension and substance from the planar magnetic arrangement has without doubt paid off; the D7000 dig respectably deep and hit with determination. They may not be the punchiest headphones this sort of money can buy, but they’re certainly no slouches.

The top of the frequency range is open and airy, but more than enough substance to avoid sounding in any way thin  or hard. And with the impeccable vocal, they demonstrate real midrange fidelity and positivity – there’s an enormous amount of detail, both broad and fine, extracted and contextualized. The D7000 communicate through the midrange in the most eloquent and expressive manner, and singers sound direct and characterful as a result.

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

The soundstage these headphones can generate is extremely wide and respectively deep, so even a recording as relatively complex as Stevie Wonder’s He’s Misstra Know-It-All (as a DSD64 file) sounds organized and coherent – even the layout of the drum kit is absolutely explicit. And this recording demonstrates that what the D7000 lack in outright low-frequency impact, they make up for in control – rhythmic expression is always convincing.

Up to this point, the Final Audio combine analysis with entertainment in a most agreeable manner. They’re fun to listen to, musical in their approach, and have so many pertinent observations to make about the minutiae of recordings that each listen is a little voyage of discovery.

The only significant drawback is a relative lack of dynamism. While they’re very attentive to the low-key dynamics of harmonic variation, the D7000 aren’t all that inclined to really lean in when the going gets intense or big shifts in volume occur. That’s not much of an issue with the recordings I’ve mentioned so far, because they both offer very polite increases in attack – but when you ask the Final Audio to deliver something along the lines of My Bloody Valentine’s Feed Me With Your Kiss as a 24bit/96kHz FLAC file, they can sound slightly undemonstrative. The D7000 are either unwilling or unable to properly track the variations in intensity with proper determination, and they are slightly short of the sort of headroom that allow significant distance between the quietest and loudest moments in the recording.

  • Sound quality score: 4/5

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Final D7000 review: Design

  • 437g 
  • Washi’ fabric for headband and earpads 
  • Aluminum/magnesium alloy housing

‘Big’ seems as good a word as any to start with. The Final Audio D7000 aren’t outrageously heavy at 437g, they stay comfortable through long listening sessions thanks to the materials used in their construction and their careful hanger arrangement… but they nevertheless feel big because, well, they are. Or, at least, their earcups and earpads are. If you’re blessed with a smaller-than-average head, there’s a good chance the D7000 will prove to be rather more headphone than you’re comfortable with.

Final Audio has designed the D7000 to be as repairable and serviceable as possible and that is to be commended. Those tiny exposed screw-heads tell their own story – almost every part of these headphones can be removed if required. So hardware upgrades are possible, as is replacement or repair. In other words, the D7000 should last you a very long time. This is just one advantage derived from Final Audio’s insistence on conducting the entire manufacturing process in-house – even to the point that it’s designed and built its own assembly jigs and measurement jigs in order to ensure the quality of build and finish is exactly how it wants it to be.

The earcup housings are made from machined aluminum/magnesium alloy, which helps keep weight down, and they feel just as good as they look (as long as you’re fine with black – it’s the only option where finish is concerned). They adjust on the headband using a fairly rudimentary ‘friction pole’ arrangement, but that does at least mean the arms don’t flare out from the side of the weather’s head all that far. 

Final Audio has used a light, breathable fabric for the covering of the headband and earpads. It’s derived from ‘washi’, a traditional Japanese paper – and as well as offering good moisture control, lightness of build and excellent durability, we will all be pleased to learn it also has excellent anti-bacterial and odor eliminating properties.

  • Design score: 4/5

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Final D7000 review: Value

  • Well built; exceptional attention to materials used
  • Requires good amplification – and expensive regardless

If you’ve read this far then you know the D7000 are very well built and finished, using high-quality materials. You’ll know they use some quite innovative technologies in order to do their thing, and you’ll know their modular construction should mean they last for years. You’ll know that in pretty much every respect except dynamic response, they’re a profoundly enjoyable listen – as long as you have amplification capable of driving them efficiently. And you’ll also know they’re by no means your only choice if you want to spend big on some new headphones…

  • Value score: 4/5

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Should I buy the Final D7000?

Buy them if...

Don't buy them if...

Final D7000 headphones outside, on a sunny day

(Image credit: Future)

Final D7000 review: Also consider

Focal Stellia
Focal's stunning – and we mean that visually as well as aurally – over-ears have been sitting pretty among the audiophile-grade elite for a few years now. Think high-quality craftsmanship with a stunning open presentation that leads to mind-blowingly good sound. Yes, that $3,000 price tag could be a tad excessive, but if you've got Final Audio money, you've got Focal money…
See our Focal Stellia review for the full story

How I tested the Final D7000

  • Connected to an iFi iDSD Diablo 2 headphone amplifier 
  • With a variety of digital audio file types and sizes
  • For well over a working week

My reference amplifier (a Naim Uniti Star) has a 3.5mm headphone socket – and so all my testing was done using a (hugely capable) iFi iDSD Diablo 2 headphone amplifier connected via UBS-C to an Apple MacBook Pro loaded with Colibri software in order to play proper high-resolution content. I listened to less information-rich stuff too, of course, and to music of every style and genre. And I did this for well over a working week, because frankly it was no kind of hardship at all…  

Xodo PDF editor review
9:42 am |

Author: admin | Category: Computers Gadgets Pro Software & Services | Tags: | Comments: Off

Wherever you look in the digital world, you can’t escape from the appeal of PDF, and a good thing too in our opinion: it’s a format that preserves the layout of a document no matter which device it’s being read on. 

Having reviewed all the best PDF editors and even tried the best free PDF editors to see how they measure up, we decided to give Xodo a go. How does this desktop, mobile, and online PDF editor compare? We put it to the test.  

Xodo: Pricing & plans

  • 4 different subscription services, with 2 simple prices. Xodo’s aim is clearly to make it as easy as possible to welcome you into the fold - and the free option doesn’t hurt

Xodo comes in multiple flavours, depending on where you’ll be using the service the most. There’s Xodo Mobile, designed for Android and iOS devices. It allows you to convert files, redact and optimise them, and includes annotation tools and OCR capabilities.

Xodo Web is an online service, designed to be accessed via your web browser. It possesses additional tools (over 30 according to the pamphlet), including an AI-based summariser.

Xodo PDF Solution is software for your Mac, PC or Linux system. The number of tools increases to 60.

Each of these cost the same on their own: under $10 a month on a yearly contract, or $13 when you pay on a month by month basis. If all of them appeal, you can get the Xodo Document Suite instead, for $15 a month for a year, or $20 monthly.

If you’re still undecided, you can also explore Xodo for free. For the purposes of this review, we’ll be looking at the online solution, which you can check out by clicking here

  • Pricing & plans: 4/5

Xodo: Tools

Xodo by Apryse during our review process

You’ll find Xodo’s tools are well-organized, making it easy to select the one you need (Image credit: Apryse)
  • All the tools at the heart of Xodo are easy to access, and well-organized.

Unlike many PDF software we’ve tested, Xodo is very welcoming to new potential customers, letting you explore numerous tools and features for free, without you even having to create a free account with them. Point your web browser towards xodo.com, click on the big dark blue ‘Explore All Tools’ button, and off we go.

This leads you to a page showcasing every tool the online service offers (these can also be accessed via Xodo.com’s menubar, under the ‘Tools’ menu).

You’ll find most are designed for specific jobs. The first ones on the list for instance, focus on editing your files, be it to add text boxes, images, or annotating work, redacting sections of it, cropping and compressing, and more. Essentially if you’re used to this type of service, these tools won’t surprise you. Also included is the ability to edit Microsoft Word .docx documents.

Next comes conversion tools, either from PDF to another format, and vice versa (Mac users don’t need the latter as that capability has been baked into the operating system since Mac OS X). There are also tools to reorder pages, as well as merge and split PDFs. It’s all very well setup and organized, making it easy for you to choose the exact feature you need at any time.

  • Tools: 4/5

Xodo: User experience

Xodo by Apryse during our review process

One tool for one function… easy to use, but more versatility would be preferable (Image credit: Apryse)
  • Xodo offers you many tools, but we feel it would be more workflow-efficient if more tools were combined so you could perform many different actions in one go.

The tools available range from the simple, such as reordering pages in a document, to the complex, such as altering the very content of a document. Now some tools focus exclusively on what they’re supposed to do. For instance, select the Delete Pages tool, upload your document, and all you’ll be able to do is choose which pages to delete. Makes sense, right? It’s a simple concept but it does exactly what it says.

Except, wouldn’t it be great if not only could you delete a page, but also rotate another, and rearrange a couple more for instance? You may say, “this isn’t how this service works”, but you’d only be partially correct. The ‘Rearrange PDF’ tool, allows you to Rotate some pages as well. 

Xodo by Apryse during our review process

Some tools, like Extract, do allow versatility, letting you reorder and rotate pages (Image credit: Apryse)

In fact, the ‘Split PDF’ tool also allows you to rotate and rearrange pages, which really feels like this is how it should be: you’ve uploaded a document, so you should be able to perform as many actions as you’d like with it. The tools that allow this feel much more expansive, and you feel pretty restricted by the ones who don’t.

Should you need to do multiple actions to a document that can’t be done with a single tool, you’ll have to perform the first action, download the new changed file, and re-upload it, this time in the next tool, to carry on your work. It feels needlessly time consuming.

  • User experience: 3.5/5

Xodo: Advanced tools

Xodo by Apryse during our review process

Redacting text is as easy as selecting it (Image credit: Apryse)
  • Xodo has a string of powerful tools on offer which work well and are surprisingly easy to use - but most are paywalled or have limited-time trials.

By far the most powerful tools in Xodo’s arsenal are those in the Edit category. The ‘Redact’ tool for instance is incredibly simple to use: just select the parts you wish to remove, and Xodo will create a new file with those sections blacked out and un-selectable.

Even better is the 'PDF Editor' which allows you to add text boxes, highlights, annotations, the works - you’re offered numerous ways to write on a PDF, and you can go one further with the ‘Edit PDF Text’, which gives you the ability to alter the very fabric of the PDF, altering the words, changing the chosen font, resizing images, deleting sections, you name it, you can do it.

Xodo by Apryse during our review process

It's very simple to alter the content of a PDF file (Image credit: Apryse)

This is where you may well reach some limitations to the free trial: surprisingly, you can do a lot for free, from basic organisational work, to intense annotations. You’ll even be allowed to download the finished work for free. Until you can’t. You have a set number of actions you can perform. Exceed that allotment, and you’ll have to wait 7.5 hours before you can explore further… or start a subscription and carry on working faster.

More advanced tools, such as ‘Edit PDF Text’ let you perform changes but won’t allow you to download the finished product, while ‘Ask PDF’ (an AI-centric tool which lets you interact with the content of a file), needs a subscription to get started. Those limitations are perfectly understandable, as the aim is to get you as a customer after all. You are offered a 7-day free trial, but you’ll need to subscribe to take advantage of it (just don’t forget to cancel it before the end date, should you decide this service is not for you).

  • Advanced tools: 4/5

Should I buy Xodo?

Xodo by Apryse during our review process

You can annotate documents in loads of different ways here (Image credit: Apryse)

Buy it if...

You need to work with PDF files, and perform numerous actions, all from one service, and all from any device you can log onto.


Don't buy it if...

Your needs can be covered by free software (such as Apple Preview), you don’t like working online, and you don’t like timed restrictions when trying to use the service for free.


For more productivity tools, we tested the best free PDF readers, the best PDF reader for Mac, and the best PDF readers on Android.

Qualcomm silently introduces Snapdragon 6 Gen 3
9:35 am |

Author: admin | Category: Mobile phones news | Comments: Off

The latest chipset from Qualcomm is called Snapdragon 6 Gen 3, and it silently appeared on the company website during the weekend. The new mid-range platform comes to take over from the Snapdragon 6 Gen 1 as the company seemingly forgot there's no second-gen version of the 4nm chip. The Snapdragon 6 Gen 3 brings improved AI performance for tasks like activity tracking and noise cancellation during calls. The chip is really similar to the Snapdragon 7s Gen 2 with some downgrades in the CPU and Display departments. Snapdragon 6 Gen 3 Snapdragon 6 Gen 1 Snapdragon...

« Previous PageNext Page »