Last I checked (and surprisingly, I check pretty often), Dell is still the top monitor brand in the world. They dominate the display game primarily due to their professional monitor line-ups. In 2025, they will continue to put out spectacular panels for their business customers, offering what the people need and will need in the foreseeable future. The UltraSharp line-up has led this charge of premium office monitors for quite some time, with the U3225QE as the newest release.

Unless you have a super simple setup and you can get away with plugging your laptop directly into your monitor over HDMI, and then your setup is complete, most people benefit from a dock in one way or another. It may not be used heavily every single moment, but having a dock where you can plug in other cables, plug-in drives, or accessories and access your computer can be super handy. Another thing that not many setups have, but many would benefit from, is a KVM dock.

Dell's U3225QE continues the legacy Dell has set forth with a gorgeous panel, the world's most comfortable display, an integrated Thunderbolt Dock, and a KVM switch.

This is easily one of the best business monitors for those working on multiple devices in the professional space.

Dell U3225QE: Price and Availability

The Dell UltraSharp 32 4K Thunderbolt Hub is priced at $949.99 and is available at Dell and other business monitor resellers. It is backed by a 3-year Advanced Exchange Warranty, which includes access to the premium panel exchange. One thing to note is that only a mere fraction of Dell monitors are purchased through Dell, and most are purchased through a third party.

Dell U3225QE: Unboxing & first impressions

The box for this Dell Monitor was a little different than the standard brown box I've expected from most monitor manufacturers. This one was in a black box with a photo of the monitor on the front and prominent Dell branding. Once unboxing, though, everything felt familiar.

Within the contents are the monitor, a stand, a Thunderbolt 4 Cable, a DisplayPort Cable, a USB-C to USB-A cable, and the IEC power cable. The monitor stand and base are the same as those used by Dell for years. It works well, has integrated cable routing, and is height-adjustable.

However, it also takes up a lot of space. So, I usually opt for a monitor arm. Thankfully, as most monitors are these days, this monitor has a VESA mounting capacity, so I could put this display on the Mount-It monitor arm I had set up already.

Once I got the monitor arm mounted, the other things I noticed immediately included the pop-out ports, the plethora of ports on the back, the fantastic display, and my appreciation for IEC monitors in general.

Dell U3225QE: Design & build quality

Dell's monitors all look like they belong together. This one is no different. It's a black panel front with minimal bezels, a light grey plastic backing, and ports at the bottom middle of the back of the display. Another thing that I appreciate about Dell is that there is minimalist branding all around. That makes it an easy choice to toss this monitor on my testing desk and be able to leave it there without it looking like a branding piece or a gaudy flashy display.

Dell also made sure to include some front-facing ports since this is a Thunderbolt dock as well. There is a pop-out grouping of ports on the left-hand bottom bezel, allowing for ease of access when needed, and then it can be clicked back in place when not in use.

Dell U3225QE: In use

I'll speak quickly to a few different use cases for this monitor. This display is fantastic for people who need an all-in-one display in an office or workspace, especially if you have multiple devices. This monitor is also great for the home office and can be used for work and play, all on the same display. Another use case would be for videographers looking for a significant multi-use display.

For my use case, I have the Dell UltraSharp 32 4K Thunderbolt Hub Monitor on my secondary desk, which is directly behind my main desk. I have it on my Flexispot E7 Plus desk, with a Grovemade desk shelf, a Mount-It Monitor arm, and a Grovemade desk pad. I added a nice BenQ lightbar to the top and a few other gadgets around the desk to finish it.

For the last few weeks, I've had this monitor as my computer and peripheral testing area, making it super easy to plug in any laptop to the USB-C cable to charge and run data and video, all to the built-in hub on the back of the monitor. I can also run any HDMI or DisplayPort to the monitor, making it easy to plug in any desktop I am testing, any gaming system for after-hours fun, an Apple TV (for the screensavers and aesthetic vibes), and just about anything else. All of this without a dock since the monitor has it all built-in.

Translating this to the business world, this could be your all-in-one display. It's got super rich IPS Black colors, even though it's not running an OLED Panel, so it will look great with your content, no matter what you're doing on it. It's a 120Hz refresh rate, making the display buttery smooth, especially when you pair it with the 4K resolution and great colors. All around, the picture is brilliant. I'd suggest this as your only monitor if it fits the specs and price you're looking for.

Regarding features, the monitor has a built-in KVM on top of the Thunderbolt Dock, which I have already discussed. What's great about a built-in KVM is that you can switch displays for multiple computers/devices and swap around your inputs and peripherals simultaneously. Picture this: the Dell UltraSharp 32-inch 4K is your only monitor. You work from home. You can easily have your work machine plugged in, whether it is a laptop or a desktop. During the day, you can quickly finish your work on this brilliant panel, knocking out multitasking or project management, coding, writing, or virtual meetings. Then, when you're on lunch, you can press a button and swap your mouse, keyboard, webcam, mic, and any other accessories you want over to your personal laptop to check on the game, check your personal emails, work on your side project, video call a family member, or whatever else. Then, you can swap right back to your work machine with another simple press. No more needing multiple keyboards or having all your gear spread across a desk in a cluttered mess. Better yet, thanks to the great inputs, you can even have your gaming system plugged in, so after the workday, you can swap into an evening of gaming if you so choose.

Further, if one monitor is insufficient, Dell allows for daisy chaining these monitors, meaning you can still run a one-cable setup. Still, you can have several of these monitors side by side or stacked to give you even more digital real estate.

Sadly, there is no speaker built into this display. I say sadly, but at the same time, I only ever use monitor speakers for the occasional internal Google Meet, where I don't need brilliant audio; I need to be able to hear my teams. So, while it's a loss, I'd be frustrated at the quality if there was a speaker. And, if I wanted a good speaker, I could get the web conferencing variant like the Dell P3424WEB, but then I wouldn't need one of the best business webcams, which have great features in and of themselves.

Dell U3225QE: Final verdict

The Dell UltraSharp U3225QE is a gorgeous monitor that would be a perfect productivity companion for almost everyone. It's got impressive connectivity options, excellent pictures, 120Hz buttery smooth motion, and one of the best-rated eye-friendly screens on the market. It's not perfect, but for the vast majority, it's precisely what you'd want and need.

For more essentials, we've reviewed the best business computers and the best business laptops.

The HP LaserJet M209dw is an affordable and remarkably compact mono laser printer aimed at small business and the micro office. It’s a simple print-only device, but it comes with key features such as auto-duplex printing, dual-band Wi-Fi, Wolf Security and fax functionality that add up to something that would do well in shared office.

HP reckons it can handle a duty cycle of up to 2,000 pages per month. Being a LaserJet, rather than an inkjet, I already know it’ll always be ready to print without fear of blocked nozzles, and the total cost of ownership looks very competitive.

However, I was curious how it would compare to the best home printers and the best small business printers I've reviewed. After all, with only one paper input, however, and not much inbox toner, it still needs to justify its $149 price tag, so let’s delve deeper.

HP LaserJet M209dw: Design and build

HP often leads the way when it comes to printer design and innovation and the LaserJet M209dw is a good example. It’s significantly smaller than the similarly priced Brother HL-L2865DW in every dimension and with its paper tray folded away, it fits into my desk drawer. In operation, though, you’ll need to keep the paper cassette in place so it takes up a bit more desk space than those dimensions suggest.

There’s no scanner, no touchscreen display and just one paper input, so it’s a minimal and clean aesthetic. The buttons are on top while a stripe of vivid LED light across the front panel lets you know when the printer is on and connected to the Wi-Fi. It changes from violet to blue when it’s online.

The paper input tray feels rather insubstantial and comes unclipped a bit too easily. On the plus side, this forward-facing flap makes it easy to load 150 sheets of paper and switch paper stock quickly. It’ll take any paper size from 4x6 photo paper to A4 or legal. With no additional multi-purpose input tray it’s something I had to do a lot during the test.

HP LaserJet M209dw: Features & specifications

Being a budget print-only device, the HP LaserJet M209dw isn't likely to top my round-up of best HP printers any time soon. It has few features to mention. You do have, what I consider the essentials for a business printer; auto-duplex, dual-band Wi-Fi, Ethernet and USB ports and some security software to prevent attacks over the network. But it also has Bluetooth to make the setup procedure easier, and if you use the HP Smart software, you add a fax facility and the ability to print remotely via the cloud.

It’s a pity there’s no multi-purpose tray for those one-off jobs such as printing on headed paper and a display of some sort would have been nice. For such a small printer that’s regularly discounted to below the one hundred dollar price point, I can’t complain too much.

The quoted maximum print speed of 29ppm (pages per minute) in simplex draft mode is not too shabby, and there’s room for 150 sheets of paper in the input tray. The output tray can hold 100 sheets. There’s no USB Host port at the front, but you do have Ethernet and USB ports at the rear. Print quality is given as the standard 600x600dpi and there’s 64GB of inbuilt memory, which is less than most new printers, but it didn’t prove to be a problem during the test.

HP LaserJet M209dw: Setup and operation

With Bluetooth built in and a good companion app called HP Smart, the HP LaserJet M209dw is especially easy to set up. The starter cartridge is already installed, so all you need to do is load some plain paper, turn on and follow the instructions on your smartphone. You’ll see your new printer appear on the app because it can make a Bluetooth connection right away and then help you to join your local Wi-Fi network.

OK, so it didn’t actually work first time for me, but after turning things off and on again, I managed to get the printer online eventually. I’m sure this had more to do with the capricious nature of Wi-Fi than HP’s streamlined setup procedure.

A touchscreen interface would have made the HP LaserJet M209dw easier to operate, but a simple print-only device like this doesn’t really need one. The forward-facing paper tray is conveniently located for switching media and the button controls are intuitive enough.

HP LaserJet M209dw: Performance

The HP LaserJet M209dw printed clearly and reliably throughout the test, with no misprints or paper jams. It did especially well with black text on plain paper, which appeared consistently crisp and legible down to the smallest point size. Printing in draft mode produced only slightly paler print that would be fine for most circumstances.

This isn’t the fastest laser printer on the block. Its top speed of 29ppm is slower than that of the Brother HL-L2865DW, but it’ll still beat any inkjet and it flips the paper in auto-duplex mode quite quickly. The first page out time is given as 7.6 seconds, but this depends on so many factors as to make it a not very useful parameter. More significant is the 30-second warm up time, which is rather slow.

The HP LaserJet M209dw is not so good at printing graphics and photos. Both appear too dark and with poor contrast, as you can see in the photo comparison where a Xerox printer shows how the lion should look.

HP LaserJet M209dw: Consumables

The HP LaserJet M209dw will take a high yield black toner cartridge (135X) costing around US$130 (£83), which gives a reasonable page rate, that’s just a little higher than the aforementioned Brother HL-L2460DW.

It’s significantly more expensive to run than an ink tank inkjet like the Epson EcoTank ET-M2140, but much cheaper than any cartridge inkjet. I should warn you that there’s not much toner in the starter cartridge that comes with this printer. Barely enough for 700 pages.

HP LaserJet M209dw: Maintenance

Usually, the only component of any of the best laser printers that you need to replace is the imaging drum, but in this case the drum is integrated into the cartridge, so you’re replacing it every time you change cartridges. Unlike inkjets, which need to run a maintenance cycle every so often, the only thing to think about here is stopping an excess of dust from penetrating the printer.

HP LaserJet M209dw: Final verdict

The HP LaserJet M209dw is so small and effective and reasonably priced that it’s hard not to like.

Home users will appreciate the prompt and precise pages of text that this black and white printer can turn out and the Bluetooth-enabled setup procedure, while business users in a small shared office will welcome HP’s Wolf Security protection and dual-band Wi-Fi.

I would like to have seen an additional multi-purpose input tray, as the solitary 150-sheet input is limiting. And while text looks sharp, graphics generally appear too dark and lacking in contrast. The amount of toner in the setup cartridge (enough for 700 pages) is also a bit stingy, but those niggles are all explained by the low price and conveniently compact size of this neat laser printer.

For more budget models, I've reviewed the best cheap printers around.

• ^ Back to top

Scan opts for the Intel route with its lower-priced system, as the 3XS GWP-ME A132C packs the best Intel CPU available in this class. Where other manufacturers chose the Core i9-13900K, Scan steps things up with the i9-13900KS. This incorporates eight P-cores with Hyper-Threading and 16 E-cores without, but the P-cores have a base frequency of 3.2GHz and 6GHz maximum boost, while the E-cores start at 2.4GHz and go up to 4.3GHz (although the latter is the same as the K variant).

Scan also takes advantage of the processor’s support for DDR5 memory by supplying 64GB of 5,600MHz RAM in the form of two 32GB DIMMs. This leaves two slots free for upgrade. The graphics choice is dependable, too: you can’t go wrong with Nvidia’s RTX A5000 handling 3D acceleration. Sporting 8,192 CUDA cores and 24GB of GDDR6 memory on a 256-bit bus providing 768GB/sec of bandwidth, the A5000 is a potent GPU.

The components of this workstation are built into a capacious Fractal Design Meshify 2 chassis, which offers lots of space for storage upgrades. Scan supplies only a single drive, but it’s a good one – a 2TB Corsair MP700 NVMe M.2 SSD, which supports PCI Express 5. According to testing with CrystalDiskMark 8.0.4, this drive provides sustained reading of 10,074MB/sec and writing at 10,190MB/sec, nearly 50% faster than the best PCI Express 4 NVMe SSDs. Only the Crucial T700 used by Armari this month is faster.

Despite its Core i9-13900KS CPU, the A132C came second to systems equipped with the K variant in the PC Pro benchmarks, although a score of 827 is still superb. Its Maxon Cinebench R23 CPU rendering result of 37,442 was also beaten by the Chillblast Apex Core i9 and Armari’s AMD Ryzen 9 7950X. However, the Blender CPU rendering time of 296 seconds beat other Intel-equipped workstations.

The RTX A5000 graphics delivered as expected with SPECviewperf 2020 v3.1 viewsets, showing competent scores for 3D animation, engineering and CAD. The excellent OpenCL result in LuxMark 3.1 of 15,287 was mirrored by a Blender GPU render time of just 143 seconds, although Armari’s AMD Radeon W7800 was faster, and the PCSpecialist Onyx Pro’s Nvidia GeForce RTX 4090 was in a different league entirely.

This is an excellent workstation for £4,500, and superb value when you consider its components, but it’s pipped to the top spot by Armari’s entry this month.

We also ranked the best digital art and drawing software.

PCSpecialist has thrown everything at its £10,000 workstation. Not only does it incorporate AMD’s range-topping 64-core Threadripper Pro 5995WX, but it also includes AMD’s latest professional graphics.

The CPU supports multithreading so offers 128 threads. The base clock is 2.7GHz with a boost to 4.5GHz. While there’s no DDR5 support yet for the Threadripper Pro, the eight-channel memory configuration improves bandwidth. PCSpecialist includes a whopping 256GB of 3,200MHz RAM in the form of eight 32GB modules, taking advantage of the extra throughput.

PCSpecialist opts for the brand new AMD Radeon Pro W7800 for graphics acceleration. This combines 4,480 RDNA 3 unified shaders with 32GB of GDDR6 frame buffer operating with 576GB/sec bandwidth.

Two storage devices are supplied with the Ultra. The 2TB Samsung 990 Pro NVMe M.2 drive operates at PCI-E 4 speeds. It achieved sustained reading at 7,404MB/sec and writing at 6,818MB/sec. The other storage device is a capacious 10TB Seagate IronWolf Pro 7,200rpm mechanical hard disk, delivering 261MB/sec reading and 253MB/sec writing.

The Onyx Ultra managed a score of 794 in the PC Pro benchmarks, beaten only by the systems using Intel’s Core i9. Its main weakness 231 in image editing, which is a single-core task. The Cinebench R23 multicore rendering score of 71,519 is phenomenal, although Armari went further with the same processor. The Blender Gooseberry CPU render time of 134 seconds was also behind Armari.

Although the AMD Radeon Pro W7800 is a fantastic new graphics accelerator, it benefits from being paired with fast single-core CPU speeds, which the Threadripper Pro can’t offer. With SPECviewperf 2020 v3.1, the scores of 194 in 3dsmax-07 and 792 in maya-06 are superb, but Armari did better by partnering the GPU with a Ryzen 9 7950X. Similarly, engineering and CAD viewsets were behind. However, a number of these scores were ahead of the Nvidia RTX A5000 and A6000. The LuxMark 3.1 score of 12,317 and Blender GPU time of 153 seconds were more mediocre.

This is a fantastically powerful workstation, although PCSpecialist hasn’t squeezed as much rendering performance out of the CPU or modelling ability from the GPU as Armari. It’s well worth considering, though, with great all-round abilities and lots of storage for media assets.

We also rated the best free video-editing software.

We haven’t seen many blue-chip brands in our workstation Labs for some years. This has largely been because these manufacturers stuck with Intel Xeons, even when AMD was in the ascendancy, so wouldn’t have fared well. But Lenovo has been offering the AMD alternative for some years and was the initial partner for the Ryzen Threadripper Pro when it arrived last year. Now we get our first look at what Lenovo can do with this potent CPU.

The system is based on the AMD Ryzen Threadripper Pro 5945WX, which has the lowest number of cores of any CPU this month – just 12. These run at a base 4.1GHz and boost 4.5GHz, with multithreading and support for eight-channel memory. But Lenovo only provides four 3,200MHz DDR4 DIMM modules, so the bandwidth is quad channel with half the throughput of eight-channel, even though the total was a wholesome 64GB.

Lenovo offers a choice of AMD and Nvidia graphics with the P620, and our system came with Nvidia’s RTX A4000. This places this configuration as a modelling workstation rather than more general purpose. Lenovo was IBM’s hardware manufacturer, and when IBM became a services company Lenovo inherited its server and workstation business. The chassis is still reminiscent of the former brand, with excellent tool-free design.

In this high-powered company, the P620 fell behind, achieving 529 in the media-focused benchmarks, 21,580 in the Cinebench R23 multicore rendering test and 486 seconds for the Blender CPU render. These would have been amazing scores a year ago, but all other systems here are way ahead. The Adobe Media Encoder results were impressive, however, taking 121 seconds with CUDA acceleration enabled.

Although the Threadripper Pro has a solid 4.5GHz top single-core frequency, this clearly held it back when modelling. The SPECviewperf 2020 v3.1 results were excellent on an absolute scale but were beaten by every other system. The 2TB Samsung PM981ab was also the slowest NVMe drive here, delivering just 3,519MB/sec reading and 2,986MB/sec writing.

It’s hard to mark down the Lenovo P620 Tower for lagging behind in performance. It’s the cheapest system in this labs test by nearly £900 inc VAT and if upgraded to £4,500 would be far more competitive. It’s also a solid, well-built workstation. With the right specification for your money, it could be well worth considering.

We've also ranked the best monitors for dual-screen setups.

SMBs that want the best on-premises remote support solution need look no further than NetSupport Manager (NSM). Now well into its third decade, NSM has been continuously updated, with version 14 on review providing a redesigned Control interface, support for Windows 11 and Server 2022 clients plus two-factor authentication (2FA) and SSL/TLS certificates to tighten up access security to remote systems.

Licensing couldn’t be any easier: pricing is based only on the number of supported systems. You don’t need to worry about subscriptions, either, with perpetual licensing for up to 500 systems costing a straight £10 each.

Installation is a breeze. We loaded the Control component on a Windows 10 host and used the separate Deploy tool to scan the local network and push the client to all our Windows desktops and servers. The client executable is now protected from malware actions; if its name is changed, it won’t be allowed to run.

The new Control interface focuses on ease of use and has a status bar at its base showing the number of clients plus those currently connected and an icon to disconnect them all with one click. Search facilities have been improved, the tree view can now be minimized, and if you double-click on a client in the main panel you can assign different actions such as starting remote control or remotely launching an application.

The tree view uses dynamic grouping to neatly organize clients into categories such as Windows, macOS, Chrome OS and Android versions, hardware enclosure types and geographical locations. You can create custom groups using your preferred criteria and the tree also has options to browse for a client and see those that have sent help requests.

The free PIN Connect server accelerates support connections across large networks. The technician and user simply enter the same unique PIN and an instant connection is created for them.

Selecting a group in the tree shows all members in the main pane and a monitor mode displays scalable screen thumbnails so you can watch user activity in real-time. Users needn’t worry about privacy issues as when the Control app connects, their system tray app alerts them and they can disconnect at any time.

A remote control session opens a new window with a wealth of support tools presented in its upper menu. Along with choosing to control, share or passively view the screen, you can launch local apps, have text and audio chats, take screen captures, share clipboards and reboot the client.

NSM scores over cloud-hosted solutions as its distribution tool sends local files to multiple users, technicians can run training sessions by showing their screen to user groups and they can record Control host activities and replay them. And being an on-premises solution, performance between a host and client on the same LAN will be much faster.

Remote offices and home workers come under NSM’s support umbrella, too. The NSM Gateway and Connectivity Server are included in the price and allow technicians to reach out over the internet to systems with the client installed.

Security is tight: along with 256-bit AES session encryption, the Connectivity Server, Gateway and clients must all possess the same key. Remote clients can only connect to one gateway, the Connectivity Server connection log can be downloaded for further security analysis and larger sites can improve performance by using multiple Gateways in load-balanced configurations.

SMBs that prefer their support services in-house won’t find a better alternative to NetSupport Manager. It delivers a wealth of support tools, including secure access to home workers, while its perpetual licensing plans are highly affordable.

We also ranked the best work from home apps.