Audio - Organizer

Bowers & Wilkins Pi8 review: excellence across the board from B&W’s much-changed flagship noise-cancelling earbuds

4:30 pm | September 22, 2024

Bowers & Wilkins Pi8: Two-minute review

I was once told that only a poor writer starts with a quote. So forgive me, because this one (from author and leadership mentor John C. Maxwell) explains my thoughts on Bowers & Wilkins' Pi8 far better than I could: A man must be big enough to admit his mistakes, smart enough to profit from them, and strong enough to correct them.

A lot has been corrected here, and it takes a big man (or woman, or person) to do it. TechRadar reviews typically begin with the bold claims made by a product's marketing team, and end with whether or not we felt the performance lived up to the hype. But B&W has approached this iteration with such humility, honesty and determination (rather than nonchalance and bravado) that I cannot do that. What I can tell you – and with some joy – is that the Pi8 are some of the best noise-cancelling earbuds I've ever tested.

They are, as you'll probably have guessed, completely unlike their older siblings. Gone are the Swiss watch-style embellishments and metallic circular top plates of the Pi7 and Pi5 (and the Pi5 S2 and Pi7 S2), which looked beautiful in my hand but didn't work in my ear canal. Bowers & Wilkins has effectively started from scratch this time around, deploying the services of the same in-house team that created its PX7 S2 and sublime PX8 over-ear headphones – a set of cans I said "look stunning and sound even better" under intense review.

Has the gamble worked? While I'd love to stretch this two-minute verdict out, let's face it, the star rating at the top of this review is kind of a giveaway. Yes, it has. The Bowers & Wilkins Pi8 are now as physically comfortable and secure as they are sonically detailed and dynamically agile.

Also, you now get on-ear volume control. I've been knocking B&W's decision to leave this off the spec sheet since 2021, which meant that even with the company's most elite earbuds, I had to rifle through my bag to alter the volume, while propositions at a fifth of the price could do it. And now that's fixed. Okay, you have to choose whether you want the tap-and-hold gesture of either earbud to tweak volume (left down; right up) or scroll between ANC and passthrough in the left bud, and voice assistant activation in the right, but I don't care – at least, not enough to knock a half-star off.

The Bowers & Wilkins Pi8 are a five-star set of earbuds all day long, even at their considerable price point.

Bowers & Wilkins Pi8 held in a hand, with floral background — (Image credit: Future)

A quick bit about their corresponding Pi6 siblings, which were unveiled (as is B&W's tradition) on the same day: aptX Lossless support is reserved for the flagship Pi8. Also, while the slightly cheaper Pi6 feature new 12mm bio-cellulose drivers (based on tech used in the Bowers & Wilkins Px7 S2e, B&W's 2023 update to the aforementioned PX7 S2 over-ears), the Pi8 get an upgraded DAC, DSP and amplifier components from ADI, meaning they effectively bypass Qualcomm's digital-to-analog converter. You also get the carbon cone drive unit technology first used in the excellent top-tier PX8 over-ear headphones in the Pi8 – see the design language carried over from that in-house team?

The Pi8 also offer the case retransmission function first seen in the Pi7 and January 2023-issue Pi7 S2. This lets you ping audio to the earbuds wirelessly but without Bluetooth, from connected analog or digital sources, (in-flight entertainment systems, gym equipment, newer USB-C-enabled iPhones, and so on). It's not the first case capable of doing the retransmission dance – see the Jabra Elite 10 Gen 2 or LG Tone Free T90S for more examples – but B&W's case goes a step beyond, by retransmitting in aptX Adaptive (ie. up to 24-bit/96kHz quality). It's quite the upgrade if you care about streaming quality – and with earbuds as capable (and aspirational) as the Pi8, you really should.

Bowers & Wilkins Pi8 review: Price & release date

Unveiled on August 21, 2024
Priced $399 / £349 / AU$599

Admittedly, the Pi8 are not cheap. The best one can say about the asking price is that the 2021 Pi7 launched at the same $399 / £349 / AU$699, so it's refreshing to see that Bowers & Wilkins hasn't hiked the price – although that's still top-end in today's money, to be sure.

The cheaper Pi6 became available on September 15, priced at $249 / £219 / AU$449, which is more palatable, but remember that you don't get the flagship features or hardware, as detailed above.

What else can this kind of money buy? Why, competition is rife up here, friend! Bose's QuietComfort Ultra Earbuds come in at $299 / £299 / AU$449; Technics' excellent EAH-AZ80 are also in the same ballpark, at $299 / £259 / AU$499 and the Final ZE8000 MK2 (our pick for the best-sounding buds we've ever tested) are $399 / £289 (around AU$609), where available.

Suffice to say, it's tough at the top. But that's where B&W now finds itself – and the Pi8 are sitting rather prettily up there, it must be said.

Bowers & Wilkins Pi8 review: Specs

Bowers & Wilkins Pi8 review: Features

Excellent case retransmission feature
Effective ANC
Very good call-quality; Music App is a joy to use

Do the Pi8 nix noise as deftly as the Bose QuietComfort Ultra Earbuds or the AirPods Pro 2? For me, yes. As I understand it, the Pi8 have received quite the overhaul here – using tech from their PX8 over-ear siblings – and however B&W has implemented this, it works. That cocooned feeling of leaving the outside world behind kicked straight in but without any sense of wind-tunnel nausea or my eardrums being unceremoniously sucked into a vacuum. It's probably also thanks to the hugely improved fit and the seal it creates betwixt those talented drivers and my ear canals (more on this later), but you should know that here, the noise-cancelling is very good.

There’s also a useful 'Pass Through' mode, that lets me hear my colleague talking next to me. You can switch these profiles off entirely, but there’s no capacity to tweak the levels of ANC any further, and no 'adaptive' ANC option. I don't care. When the full-fat version is this good, why get granular and try to tweak things? If you just want something that kicks extraneous noise to the curb so you can revel uninterrupted in your sonic selections, the Pi8 are it.

Now, the case: aside from its no-nonsense, pocketable appeal, you can plug that USB-C port (USB-C to 3.5mm and USB-C cables are in the box) into a non-Bluetooth source, such as an in-flight entertainment system, and it'll double as a wireless audio re-transmitter but in aptX Adaptive transmission up to 24-bit/96kHz quality. Imagine the scene: you're in the middle seat on a long-haul flight, and the window-seat passenger wants to get out. It's fine! Your earbuds are safe in your ears, still sending audio, and your fellow passenger won't trip over long tangling cables – not on your watch!

Bowers & Wilkins Pi8 earbuds, held in a hand on grassy background — (Image credit: Future)

What about call quality? I liked it a lot, despite the lack of sidetone-type tech to either boost or minimize my own or the caller's voice manually. The Pi8 have three mics per earbud and B&W says the setup's been upgraded using PX8-flavor tech. For me, even during an off-shore windy day in Woolacombe (never been? It's on the UK's North Devon coastline, surfer hotspot, you should check it out), my caller told me I came through loud and clear.

It's worth noting that there are no ear-tip fit tests, hearing tests for creating personalized sound profiles, or proprietary spatial audio processing here. If you want those things, you'll need to look at options from Bose, JBL, or even Nothing. What you'll find instead is a very good five-band EQ tab and the talented Bowers & Wilkins Music app. This companion app will quickly become the way you access your music since it corrals all of your paid-for music streaming services (so I never need to go to Qobuz or Tidal specifically – it's all here!) and even serves up various "curated by Bowers & Wilkins" playlist selections for your new listening gear.

For better or worse, B&W wants the star of the show to be the untouched and unadulterated sound quality, rather than giving you ways to mess with it. The inclusion of Qualcomm’s latest and greatest Bluetooth 5.4 chipset is a testament to that. But remember, a separate high-performance dedicated DAC/DSP amp has also been thrown in, to swerve that within even the Qualcomm chip. That's the extent to which B&W has taken matters into its own hands regarding the sound quality. While it might not be an ideal proposition for those who know they need to augment certain frequencies right from the box (and would rather have B&W do it for them), those who don't need specific sonic recipes cannot fail to be wowed by the separation, neutrality and sonic clarity here.

If you've got an aptX-compatible source, you'll get much better wireless audio support too, including aptX Lossless and aptX Adaptive support at up to 24-bit/96kHz. And as you'll read below, the sound quality here is unparalleled from a wireless earbuds design.

Features score: 4.5/5

Three screengrabs of the B&W Music app, using the Pi8 earbuds — Yes, I still love 2003 Laith Al-Deen… (Image credit: Bowers & Wilkins)

Bowers & Wilkins Pi8 review: Sound quality

Separation, detail and clarity in spades
Bass is resolute; mids textured
Noise-cancellation doesn't mar the experience

Rarely will you read a TechRadar section entitled 'Sound' so wholly positive, so prepare yourself: no matter what genre of music I threw at them (and no matter the streaming source) it felt as if the B&W Pi8 had unpacked, weighed, opened out, examined, layered and finally presented my music with the skilled hand of a French pâtissier. The Pi8 buds also didn't seem to care whether they were working with lowly compressed Spotify streams, Tidal Max tracks, Apple Music offerings or Qobuz albums. Everything was served up with a flourish.

In Lupe Fiasco's Cake, bass frequencies in the vocals sink easily as low as Fiasco is able (which is considerable), revealing a bass floor few earbuds can take you to. During the title track, Samurai, I'm struck by the pin-point accuracy of each voice's placement in the mix. Hype men jump out from my ear lobes, my temples and beneath my chin in a raucous and zealous mix.

Switching to Stranger by Hinds and Grian Chatten, jangly guitars and Hinds' ethereal vocal stylings are present and have ample room to shine, joining each other in a cohesive mix but never competing for space. Chatten's voice joins centrally and I'm living inside my head as if at a gig, with the Fontaines D.C. front-man, well, literally in front of me…

Refreshingly, deploying ANC or pass-through doesn't make anything go sonically awry either. Bass is just as resolute in Gunna's collage with pass-through on, a profile that can so often throw a slightly tinny, sweet veil over the audio.

Any downsides? I'm struggling – and we pride ourselves on being tough critics here at TechRadar. For attack, drive, musicality, dynamic nuance, balance across the frequencies, placement, timing, and all the other things I usually talk about where sound is concerned, Bowers & Wilkins' considerable work and back-to-the-drawing-board approach has paid off. Oh, do these earbuds sound good…

Sound quality score: 5/5

Bowers & Wilkins Pi8 review: Design

Totally reworked driver housings – and it works
On-ear functions require a compromise
Pocketable case

While they might not look as resoundingly premium as the Swiss watch-esque Pi5 or Pi7, the redesign here was necessary. The top surface of each nicely-branded bud is a shiny touch-capacitive button that works very well.

The buds are available in Anthracite Black with silvery accents (the sample pictured here), Dove White, Midnight Blue and Jade Green. It's a plastic build, but of premium matte plastic that seems to murmur 'I'm expensive' when you pluck them from their small, pebble-shaped case.

Bowers & Wilkins came clean to me and admitted it needed to fix some issues in the older iterations: the mic and sensors on the older Pi7 models weren’t in the best position, meaning they could get blocked by the wearer. Remember my quote at the very top of this review? It takes a big company to admit to its mistakes, and it has all been fixed for Pi8.

There's now a little indentation containing a sliver of grille, running the entire circumference of each earpiece and directly under that touch capacitive top plate. Under it are those mics and sensors – as far away from your head and ear folds as it's possible to put them. Neat.

As noted previously, a brand new "trickled down from the PX8" carbon cone driver is at the helm here, and you get four silicone ear tip options in the box: extra small, small, medium and large. I switched to the small set, but since the neck of the earbud isn't long and the design has been so carefully conceived, I don't think the tip size is paramount here. Honestly? I truly feel that B&W has taken a long, hard, humble look at Technics' EAH-AZ80 with 'concha-fit' design for the Pi8. Why do I think this? Because, as with the Technics earbuds, they look a little bulky (and they do weigh 7g each, which isn't light) but they fit just as naturally and unobtrusively. The weight is distributed as evenly as possible so they feel as if they hug your outer ear, once in situ. Simply put: they fit beautifully, and you don't need to keep screwing them further down your delicate ear canal.

The Pi8 offer more battery life than their older siblings – but not much more. The maximum playtime is 6.5 hours from the earbuds and a further 13.5 hours from the case, for 20 hours of total use – but the good news is that those tests are with ANC on. Without it, I got closer to 8.5 hours from a single charge in my testing. For clarity, the Pi7 S2's stamina was 5 hours for the earbuds (ANC off) and an additional 16 hours from the charging case, for a 21-hour total.

I do have one minor negative though, and it's similar to the minor issue I encountered with the JBL Live Beam 3. Basically, you need to ditch a set of functions again. To clarify, you can now get on-ear volume control by long-pressing either Pi8 earbud, but to have it you need to forego scrolling through ANC profiles and access to your voice assistant. On the one hand, I love that I now get on-ear volume support. On the other, I'd also like to have the option to deploy ANC by touching the earbuds as well. And I know it's not too much to ask at this level because the Cambridge Audio Melomania M100 can do it.

That's where the complaints end though because when you add in that case retransmission feature, this is a very likeable, comfortable design from Bowers & Wilkins – and a complete rewrite of the playbook that I'm sure did not come easy.

Design score: 4.5/5

Bowers & Wilkins Pi8 review: Value

Acceptable battery life given the excellent sound
Sound-per-pound, they're winning
If you want hearing tests, you'll be disappointed

The Bowers & Wilkins Pi8 are not cheap. They are earbuds for the listener who wants excellent, unchanged, high-quality audio in a comfortable build. If that's you, the sound here is the best I've heard in a wireless design to date. And if you've got a decent hi-res music service subscription, the B&W Music app will have at it and make your life very easy. Essentially, if you value sound quality above all else, here's where the smart money goes.

However, for battery life, the Pi8 can be beaten by recent options from JBL and Cambridge Audio, and if you want spatial audio mixed in with the ANC, you'll need to look to the Bose QuietComfort Ultra Earbuds.

Hearing tests (and the personalized sound profiles they can facilitate, from the Nothing Ear, for example) and ear-tip fit tests are also absent in the Pi8, so if those extras are high on your list of priorities, the value-for-money option lies elsewhere – possibly with Nothing; maybe even with the Denon PerL Pro.

Value score: 4.5/5

Should I buy the Bowers & Wilkins Pi8?

Buy them if...

Don't buy them if...

Bowers & Wilkins Pi8: Also consider

Cambridge Audio Melomania M100
The ANC is very good indeed here, too – as is the sound quality. And to top it all off, you get the option of Matt Berry on voice prompts (his "Waiting to pair!" is the best you've ever heard). The overall aesthetic isn't as polished (the case is a little bigger) and the fit is good but not exceptional, but the M100's still a viable rival, depending on your priorities.
Make your choice by reading our Cambridge Audio Melomania M100 review

How I tested the Bowers & Wilkins Pi8

Tested for three weeks; listened against the Cambridge Audio Melomania M100, AirPods Pro 2, JBL Live Beam 3 and Bose QuietComfort Ultra
Used at work, at home and on a long weekend away (in the office, walking along Woolacombe beach, on a train)
Listened to Tidal Masters, Apple Music Lossless tracks and Spotify on an iPhone 12 Pro, a Sony Xperia 1 V and a MacBook Pro

The Bowers & Wilkins Pi8 became my musical companions for over three weeks – after a thorough 48-hour run-in period.

They accompanied me to work on weekdays (walking brusquely to the station; on the London Underground network; at the office), and throughout a long weekend in Woolacombe, with regular trips along the seafront after surfing – which is a great way to test any wind interference from mics during calls.

To better test the fit and security of the Pi8, I even wore them during an aerial silks training session, and they did not budge.

To check the audio quality across the frequencies, I listened to various playlists (spanning everything from grime to classical) on Apple Music, Qobuz and Tidal, but also podcasts and albums on Spotify, and YouTube tutorials (mostly about checking the tire pressure on my car, and how to reset the system so the warning light goes off, in case you wondered) on my MacBook Pro.

I’ve been testing audio products well for over five years now. As a dancer, aerialist and musical theater performer in a previous life, sound quality, fit and user experience have always taken priority for me – but having heard how wonderful ANC can be when done well, I have grown to love immersing myself in a bubble of silence too.

SoundMagic P58BT ANC: Two-minute review

Chinese audio company SoundMagic's bid to become a leader in the best budget headphones stakes is a strong one. The audio specialist retains a special place in cash-savvy audiophiles’ hearts, thanks to 2018’s SoundMagic E11C wired earbuds, which paved the way for a range of similarly affordable IEMs. And after launching its first wireless over-ear headphones in 2021 with the SoundMagic P23BT, it’s back with a pricier follow-up.

That’s how we come to the SoundMagic P58BT ANC, cans that are still distinctly affordable, but with a few upgrades over the past models. After testing, though, I’ve got to say that the upgrades don’t make these a better proposition.

It goes without saying that you have to set your expectations at a reasonable level when looking at affordable over-ear headphones (and I say it anyway to make it clear that I did lower my standards). And there is a lot to like here with that in mind, but I had two big issues with the SoundMagic that any potential buyer will have to get over first.

Firstly, I simply didn’t find them comfortable to wear. A relatively small arch means the pads are pushed right into your head, and I had to remove them every time I listened for more than an hour due to the headaches they caused. The P58BT ANC have a 60-hour battery life which is really great (though not best-in-class), but at my rate, that means 60 listening sessions followed by ample pauses.

The other issue, which is decidedly less subjective than the last, is that the SoundMagics don’t have any kind of smartphone app, marking the only audio gadget I can recall testing in recent years that doesn’t have any kind of way to control its features other than on the product itself.

This means you’re lacking some (arguably-) basic features that most rivals have, namely an equalizer to tweak the audio mix. I desperately wanted to fiddle with the sound of the cans, but was stuck with the default balance which emphases mids over bass or treble frequencies.

If you want to toggle the features the P58BTs do have, you have to use gesture controls over the large pad on each earpiece, or rely on button-pressing patterns for the sole physical button on the left ear cup. In my several-week-long testing period, I found myself completely incapable of memorizing all the various gestures and shortcuts for the modes that I’d usually enable on my smartphone, and I’d imagine all other users (who aren’t in MENSA) will have the same experience.

As I said, you always have to bear in mind the price with low-cost headphones like the SoundMagic P58BT ANC, and the detailed audio and valiant battery life will sway over some users, especially those who may be able to overlook my stated issues. Yes, SoundMagic puts out its headphones at a competitive price point, but there are many other rivals on the market at similar price-points that I found more impressive.

SoundMagic P58BT ANC review: Price and release date

The SoundMagic P58BT ANC held above a wooden table. — (Image credit: Future)

Released in August 2024
Sell for $90 / £79 / AU$134

The SoundMagic P58BT ANC were announced, and put on sale, at the end of August 2024. That’s a lengthy three-year hiatus since the P23BT. They're also available in a pretty lengthy list of countries around the world on SoundMagic’s website.

At launch, the headphones cost $90 / £79 / AU$134, so they’re pretty affordable if not as bargain-bin as the $55 / £50 (roughly AU$100) P23BTs, and we'd expect a little more as a result.

There are a lot of competitors at that price point, including some on our list of the best cheap headphones, with the top-rated Earfun Wave Pro and the Sony WH-CH520 both slightly cheaper.

SoundMagic P58BT ANC review: Specs

SoundMagic P58BT ANC review: Features

The SoundMagic P58BT ANC with a gesture control being activated. — (Image credit: Future)

Distinct lack of features
ANC is welcome if not powerful
Total battery life of up to 60 hours

I tend to wax lyrical in headphone review ‘features’ sections, for better or worse, but that won’t be the case for the SoundMagic P58BT ANC. And that's because there isn't a lot to cover.

Let’s start with the titular feature: active noise cancellation, something the P23BT didn’t offer. Here it’s present and accounted for, but nothing to write home about: solid enough to remove overbearing background noises but lacking nuance or power to compete with the greats. As an example, the headphones would cancel out the rumble of a bus I was riding, but not the low chatter of the people on said bus.

Bear in mind that these are over-ear headphones, so there's some natural noise cancellation from the natural fit of the cups, and this certainly helps the ANC.

The SoundMagic P58BT ANC on a wooden table. — (Image credit: Future)

The SoundMagics do compete in terms of battery life, with 60 hours of music in the tank. There are few headphones that last that long, even amongst over-ears, and it’s truly a blessing for people who habitually forget to charge (like me) or suffer from battery anxiety (also me). Some rivals beat the SoundMagic in this department, (see the Cambridge Audio Melomania P100 for an excellent 100-hour option with ANC disabled – albeit a more expensive one) but many top-end cans fall far short of the figure.

And the rest of the feature set is… almost totally barren. You see, SoundMagic doesn’t have an app, so all the features you’d normally find when using one are notably absent. No equalizer, no ambient modes, no way of tracking the P58BT’s battery level if your phone UI doesn’t tell you.

There is actually a low-latency game mode, which does what it says on the tin, and solves an issue that I’ve never faced in all my years of mobile gaming. For the reasons you’ll read about in the design section, I found enabling this more faff than it was worth.

Features score: 2.5/5

SoundMagic P58BT ANC review: Design

Comfortable and light design
A few on-cup controls
Folds up into carry case but no IP rating

The SoundMagic P58BT tip the scales to the tune of 305g, so they’re not particularly heavy, but there are certainly lighter headphones out there if you’re worried about them being too weighty.

That wouldn’t be a misplaced fear either, as I found them a little uncomfortable to wear – the silicone ear pads felt very rigid, pressing down on my ears rather than settling onto them, and I had to break up listening sessions as a result. It goes without saying that this is a subjective observation but I do have to mention it, especially given that I’d use some other headphones I’m testing as a reprieve when the SoundMagics got too painful.

They come in two color options: black or silver, and don’t seem to have a waterproofing or IP rating that’s listed on SoundMagic’s website.

You can adjust the cans to quite an extent with an adjustable-length headband and cans that can rotate and fold to quite a dramatic degree. I kept accidentally flipping the cans around 180-degrees and getting confused which side was right or left.

The SoundMagic P58BT ANC's ports. — (Image credit: Future)

The left ear pad is the one with the features: it has a USB-C port for charging, 3.5mm jack (with an audio cable included in the box) and the power button, which needs to be held for a surprisingly long amount of time to turn the P58BT on or off.

Most of the controls, however, come with the gesture controls, and this is my biggest gripe with the SoundMagics. The flat pad on each cup can be swiped in different directions or tapped for loads of different functions: changing volume, skipping tracks and so on.

Frankly, I found the amount of different gestures I needed to memorize overwhelming, which is to say I simply couldn’t remember any of them. If I wanted to pause music or change volume I’d have to rely on my phone; ANC is toggled with the power button instead of the pads and I continually forgot about this until I’d already tried all the swipes and slaps.

There’s also the issue that some controls are directional: swipe up for one command, swipe left for another. This would seem well and good but ‘up’ and ‘left’ can be very different directions depending on the angle you’re holding your head, and I’d often accidentally enact the wrong gesture due to leaning my head too far backward or forward, or at certain angles.

This gesture control was in place in the SoundMagic P23BT and our reviewer didn’t mind it there, but those headphones didn’t have those (few) extra features over the previous pair that need to be controlled with gestures too.

Design score: 3/5

SoundMagic P58BT ANC review: Sound quality

The SoundMagic P58BT ANC on a man's head. — (Image credit: Future)

Well-balanced audio
Mids bloated just a little
Max volume is really, really loud

Tech-wise, the SoundMagic P58BT ANC packs 40mm drivers with support for SBC and AAC. Those are largely in line with other headphones you’ll be considering at this price.

People who’ve used other budget headphones might find the SoundMagic pretty good – music has a lot of detail and clarity, with a broader soundstage than some other similarly-priced gadgets I’ve tested and a commendable lack of peaking at reasonable volumes.

However, at least personally speaking, I wasn’t a fan of the balance of the headphones. The detail of bass and treble is provided at the expense of their energy or power – mid sounds dominate the mix and on certain genres of music, this saps some of the ‘pizazz’.

I particularly think that bass-heads will be disappointed as lower-frequency sounds lack power, as though you’re watching a bassist play their instrument when it isn’t plugged in. The genres I enjoyed best with these headphones were acoustic-laden folk, singer-songwriter and bluegrass songs, where thumping bass rhythms aren't as important.

I did enjoy listening to the spoken word on the headphones though, as I found the detail provided by them helped convey small nuances in tone and pitch. Podcast-listeners might find these a decent pick.

Bear in mind that the lack of an equalizer means you’re reliant on the default sound of the P58BT ANC – no bass boosting or rock modes here. Because of this, more so than on other headphones, I'd really recommend trying to source a pair to test before you buy them.

Sound quality: 3.5/5

SoundMagic P58BT ANC review: value

It’s hard to make a firebrand statement about the cost-value proposition of the SoundMagic P58BT ANC because you’re basically getting what you pay for here.

In terms of audio quality and design, the headphones tick the boxes you’d expect from them, and you see in similarly-priced rivals.

Dragging the value down a little is the lack of an app, which gives the impression of these being some cheap AliExpress buys, even though SoundMagic is a reputed brand. However I do think the soft carry bag for the phones does tip the scale in the right direction a little.

Value: 3.5/5

Should I buy the SoundMagic P58BT ANC?

Buy them if…

Don’t buy them if…

SoundMagic P58BT ANC review: Also consider

How I tested the SoundMagic P58BT ANC

Tested for two weeks
Tested at home, in the office, on public transport and on walks

The testing process for the SoundMagic P58BT ANC took place over two weeks, which includes the set-up, review writing and general usage time. This is the usual amount of time I allocate to headphone reviews.

For most of the testing, I used the headphones connected to my Android phone via Bluetooth, but I also connected them to my phone and laptop using the audio cable for some testing too. I mainly tested using Spotify and several streaming services, with some gaming done to test out that mode. Lots of the testing was done in my office, and on various walks, bus rides and train journeys to and from it, but I also used them at home and in other everyday environments.

My history of review-writing at TechRadar spans over five years, and I've been covering tech for even longer. I've tested loads of similarly-priced headphones (including one mentioned in the 'also consider' section), as well as a range of other gadgets.

I mentioned earlier that I used the SoundMagic alongside another pair of headphones; this was a pricier model and it wouldn't be fair to compare them.

First reviewed in September 2024

Read TechRadar's reviews guarantee

OnePlus Buds Pro 3 review: a huge sonic upgrade from OnePlus’ not-to-pricey buds

1:00 pm | September 18, 2024

Author: admin | Category: Audio Computers Earbuds & Airpods Gadgets Headphones | Tags: ANC, PC | Comments: Off

OnePlus Buds Pro 3: Two-minute review

Earlier this year, the OnePlus Buds 3 made their debut with an updated design language and a more balanced sound than anything we'd heard from the company to date. Now, with the arrival of the OnePlus Buds Pro 3, that same approach has been kicked into overdrive; resulting in OnePlus' best noise-cancelling earbuds yet, and by quite a stretch.

Although on paper, the OnePlus Buds Pro 3 sport a similar spec sheet to their predecessors, the company has enhanced things at a component level; meaning the familiar dual driver design is now also backed by dual DACs in each earbud, plus a few other hardware tweaks. Pair that with revised tuning from Dynaudio and, while the Buds Pro 3 retain their forebears penchant for bass, there's far more dynamism in that lower frequency range, joined by more balanced mids and crisp highs; right through the volume range.

The Pro 3 are also brimming with features and most of them aren't solely tied to OnePlus devices anymore. You now get decent spatial audio support (with head tracking) that works on a far greater range of Android devices than before (as well as non-Android iPhones). Seamless dual device switching, a low latency game mode and five excellent EQ presets, along with a frankly outlandish bass boost feature and the ability to tune your own profiles too.

OnePlus Buds Pro 3 review case closed OnePlus Pad 2 OnePlus Nord 4 — (Image credit: Future | Alex Walker-Todd)

Any downsides? One. As much as the sonic profile has come on – enough to make these true rivals for notable buds from audio-first brands such as Bose and Technics – and despite packing what OnePlus bills as its best noise cancelling yet, ANC (active noise cancellation) is good but not class-leading. Microphone performance is fine too, with acceptable background noise suppression, but the transparency mode does little to differentiate itself from being switched off entirely.

You'll also have to reconcile yourself to the absence of features from similarly-priced rivals, namely conversation-awareness and voice command support. Are these deal-breakers? (I'd suggest they're not, but it's worth noting that they're not here.)

Speaking of deals, despite all the advantages and upgrades over its last few buds, OnePlus hasn't upped the price of the Buds Pro 3 in most markets, including the US, where they cost $179 (with an early bird reduction at the time of writing, to $149). UK buyers will have to swallow a £20 price bump versus the Buds Pro 2, but they too can be had with an early bird offer that knocks them back down to £179. Not bad, eh?

OnePlus Buds Pro 3 review: Price and release date

OnePlus Buds Pro 3 review settings — (Image credit: Future | Alex Walker-Todd)

Launched on August 20, 2024
Priced at $179.99 / £199 / Australian pricing TBC
Early bird pricing includes a $20 / £20 discount

The standard OnePlus Buds 3 arrived on the market in February 2024 and six months later (in which time they leaked extensively), the OnePlus Buds Pro 3 launched, on August 20, 2024.

In most markets, OnePlus has set the Buds Pro 3 at the same asking price as the previous OnePlus Buds Pro 2: $179.99 in the US, €179 in Europe and ₹13,999 in India. The exception to that is the UK, where the Buds Pro 3 see a £20 increase to £199, which reframes their standing in the market as a slightly more premium offering, comparatively.

The silver lining is that, at the time of writing, OnePlus is still offering the Buds Pro 3 up with an early bird discount; a $20 reduction to $149.99 Stateside; making them something of a steal, considering the sound quality on offer. That same reduction also carries over to the UK too, so the price drops back down to its predecessor's RRP of £179, for the time being.

Australian pricing and availability hasn't yet been revealed, but as the Buds Pro 3 are already listed on OnePlus' regional website, the implication is that they'll be on sale sometime soon.

OnePlus Buds Pro 3 review: Specs

OnePlus Buds Pro 3 review: Features

OnePlus Buds Pro 3 review EQ — (Image credit: Future | Alex Walker-Todd)

Check out 'neck vertebrae health' tool
Broader compatibility than predecessor
No voice command or conversation awareness

Pairing the OnePlus Buds Pro 3 is as easy as opening up the case near a Google Fast Pair-compatible Android phone. So long as Bluetooth is turned on, all you have to do is choose to connect via the card that pops up on-screen, and that's it. iPhones unsurprisingly don't feature Google Fast Pair but connection is still painless, with a long-press on the pairing button on the side of the case, after which you just have to select the buds from the Bluetooth menu, like usual.

If you're rocking any of the best OnePlus phones, unlocking the full feature set of the OnePlus Buds Pro 3 is as easy as pairing; with access to everything direct from the Bluetooth devices menu. For any other Android phone or iPhone, control falls to the HeyMelody app (which serves up an identical UI).

OnePlus Buds Pro 3 review ANC — (Image credit: Future | Alex Walker-Todd)

From top to bottom, you're presented with a battery readout, Noise Control (which lets you toggle on ANC, Transparency or turn off both). There's then a noise cancellation sub-menu, where you can select the degree of background noise suppression; that includes three levels, as well as a dynamic 'auto' mode.

The Sound Master EQ sub-menu plays home to the hard work the Danish engineers at Dynaudio contributed to the Buds Pro 3, with five presets (Balanced, Bold, Serenade, Bass and Dynaudio featured), along with an additional BassWave toggle that can be paired with any of the EQ profiles and itself includes a -/+ 5 slider. Rounding out this menu is where you can build your own custom EQ profiles, split into six frequency sliders.

OnePlus Buds Pro 3 review EQ presets — (Image credit: Future | Alex Walker-Todd)

Hi-Res mode is next, with the OnePlus Buds Pro 3 opting for LHDC 5.0 as its codec of choice here (alongside SBC and AAC). As for devices that support it, in the smartphone space recent OnePlus, Oppo & Realme phones, as well as the top entries amongst the best Xiaomi phones, and Nothing Phone 1 and 2, are all confirmed to support LHDC 5.0, but there are other offerings from brands like Motorola that play nice with older iterations of the codec too.

I preferred the default 'Balanced' EQ profile, with BassWave disabled for general listening, but collectively augmented that configuration with the Golden Sound feature. It takes you through a frequency test for each bud, before building an audio profile unique to your ears; a feature I'd highly recommend you spend the time to set up to get the most out of the listening experience here.

OnePlus Buds Pro 3 review spatial audio — (Image credit: Future | Alex Walker-Todd)

Next-up is spatial audio, which was available on the OnePlus Buds Pro 2 but only worked with flagship OnePlus phones at launch. Now, support is hugely expanded, available across popular music and streaming apps on all sorts of Android phones, and even iPhones (although iOS isn't using Google's Spatial Audio profile). Optional head tracking is on the table too, which works well in practice.

There are three Buds Pro 3 features exclusively available to OnePlus smartphone/tablet users, but in the grand scheme of things, don't feel like damaging omissions if you're on another platform.

OnePlus Buds Pro 3 review neck mobility — (Image credit: Future | Alex Walker-Todd)

The most interesting is the 'neck vertebrae health' tool, which can use the sensors in the buds to assess your neck mobility and even notify you of bad neck posture while you're wearing them. Zen Mode Air serves up relaxing white noise sounds (like 'Summer Waves' or 'Forest Rain' in wonderful high fidelity. Lastly, the Buds Pro 3 supports camera control on OnePlus devices, letting you snap a picture with their on-stem controls, or supply your videos with the microphone feed from the buds, if desired.

Game Mode reduces latency between the buds and your device, turning on automatically on OnePlus devices when they detect you're running a game, while it appears as a toggle in the HeyMelody app for other Android and iOS users.

Multipoint connectivity (branded 'Dual connection' here) is a great inclusion on the Buds Pro 3 that, once setup, lets you seamlessly pause audio on one device and move to another without needing to re-pair to keep listening. This works without issue in practice, tested across OnePlus, Android and iOS devices.

OnePlus Buds Pro 3 review Zen Mode Air — The soundscapes available in Zen Mode Air (Image credit: Future | Alex Walker-Todd)

The last two features at the OnePlus Buds Pro 3's disposal are a fit test – to ensure you have a good seal when wearing them, and a Find My option, which emits a loud tone from the buds when activated, and on Android devices also plugs into Google's Find My Device system; noting the last location they were used.

In short, an absolute mountain of functionality that makes the Buds Pro 3 incredibly versatile for a variety of listening conditions. All that's missing is conversation-aware ANC (which quietens or pauses music when the buds detect someone speaking to you or vice versa) and voice commands; for hands-free playback control or interaction with your device's smart assistant.

Features score: 4.5 / 5

OnePlus Buds Pro 3 review: Design

OnePlus Buds Pro 3 review case open plus buds near — (Image credit: Future | Alex Walker-Todd)

Stemmed buds w/ chromed outer face
New top-loading case is better, but wireless charging is backwards
IP55 rated buds, IPX4 case

OnePlus' Buds Pro line has always sported a stem-style design, originally accented with a chrome-dipped tip aesthetic, while the driver housing has typically been finished in lightly textured plastic. With the Buds Pro 3, however, that chrome finish has crept up to cover the stem and housing completely, which I think is a shame.

While eye-catching, the 'dipped' look of previous entries made for a more distinctive appearance, even at a distance. Many levied criticism at Samsung for the design similarities of its new angular stemmed Galaxy Buds 3 and Galaxy Buds 3 Pro, but the more rounded stems and, now consistent, surface finish of OnePlus' latest buds renders them far more like chrome-clad AirPods Pro 2 doppelgangers, in my opinion.

OnePlus Buds Pro 3 review bud in hand — Look closely and you can see the touch sensitive area on the inside of the stem (Image credit: Future | Alex Walker-Todd)

That said, while the finish more readily holds onto fingerprints than previous iterations, ergonomically, it sits far more comfortably in the ear than any true wireless buds I've worn of late, and that's with the pre-fitted medium silicone ear tips. OnePlus also includes extra small, small and large-size oval-shaped alternatives in the box (along with a charging cable).

Despite the fact that they've gained a little weight, I found the Buds Pro 3 to be more comfortable and secure when worn (over the older Buds Pro 2), even when working out or for extended periods. In-ear detection proved reliable too, pausing and resuming music when you remove or insert either bud, and it works on iOS as well as Android.

The Buds Pro 3 boasts a completely redesigned case that has caused some discord among fans on platforms like Reddit. In place of the squared makeup compact-style case of previous generations – which opened to reveal the buds in their entirety – the Pro 3's buds reside within a new top-loading oval enclosure, that features smooth edges, contrasted against a leather-like textured surface finish.

Image 1 of 2

OnePlus Buds Pro 3 review case closed near — (Image credit: Future | Alex Walker-Todd)

Image 2 of 2

OnePlus Buds Pro 3 review case open handheld — (Image credit: Future | Alex Walker-Todd)

I think the new case makes the Pro 3 more pocketable and more likely to retain the buds inside, should you drop it, but some people don't seem to appreciate the change. The USB-C port on the case's underside allows for a quick 10-minute charge to deliver 13 hours of playback (for comparison AirPods Pro 2 deliver just 1 hour of playback from a 5-minute recharge), while a full 100% refill takes approximately 70 minutes.

The OnePlus Buds Pro 3 also, conveniently, include wireless charging too (a full recharge this way takes about 2.5 hours), but for some unknown reason, unlike every other pair of wireless charging-capable buds out there, OnePlus' new case design demands that you place it face down, instead of face up when recharging without cables. It's an unintuitive design move that just takes some getting used to. At least with up to 43 hours of use per charge, you won't have to worry about fiddling with the case on a wireless charger all too often.

OnePlus Buds Pro 3 review earbud controls — (Image credit: Future | Alex Walker-Todd)

Along with the existing repertoire of stem-based press or press-and-hold controls that previous Buds Pro have sported, the Buds Pro 3 carry across the new swipe gesture added to the OnePlus Buds 3; letting you adjust volume (or switch track) on-ear, by swiping up or down on the front of the stem. Even now, I still sometimes struggle to find the touch-sensitive area consistently, but controls otherwise work reliably.

For added peace of mind, the case is IPX4-rated, while the buds themselves are IP55-rated against dust and water ingress; collectively meaning you should have no issues wearing these when working up a sweat or getting caught in the rain.

Design score: 4 / 5

OnePlus Buds Pro 3 review: Sound quality

OnePlus Buds Pro 3 review in ear side — (Image credit: Future | Alex Walker-Todd)

Excellent, well-balanced sound profile
Huge upgrade on predecessor that's comparable to pricier rivals
Still behind the curve on mic voice isolation and ANC

Perhaps the most divisive aspect of the OnePlus Buds Pro 3 is the audio performance. In a nutshell, this product outputs exceptional sound, with a great default profile, outlandishly lavish bass (without making things muddy), and significantly-improved response in the mids and highs (compared to the Buds Pro 2), that punches above its weight.

The flip side is that, despite the promise of strides made in ANC, microphone performance and transparency mode, the improvements feel significantly more pedestrian.

If you didn't tell me the buds' noise cancellation was dynamic, I wouldn't readily know. ANC performance is good at slightly softening mids, while also trimming low drones and high hisses, but speech and the like still slip through, as do sudden changes in volume in your surroundings. Of course, that's to be expected to a degree, but still, the performance here when massaging away constant, low-level sounds was fine rather than fantastic.

On calls and when recording your voice, the Buds Pro 3 boast a three-microphone setup, supported by a VPU (voice pick up bone) sensor, however, the results are again just 'fine'. They're more full-bodied than the mics on some other buds around this price point, but plosives in speech tend to get lost when the Buds Pro 3 are trying to iron out background noise at the same time.

While I already touched on a lack of awareness to Transparency mode, any benefit over just disabling it altogether went as far as adding more high frequency sounds back into the buds' passive isolation.

OnePlus Buds Pro 3 review Dynaudio logo

(Image credit: Future | Alex Walker-Todd)

Microphone-bashing out of the way, the OnePlus Buds Pro 3's excellent sound improvements likely come as a result of the move to dual DACs per driver, per bud; one for the 11mm woofer and one for the 6mm tweeter. Dual DACs, two magnets and a fancy new ceramic-metal composite diaphragm on the woofer, alongside a "small but mighty" 35-micrometer flat voice coil for the high frequencies (likely the biggest contributor the this generation's more balanced sound profile) collectively elevate the standard of OnePlus' audio quality to new heights.

The result is a cleaner, more dynamic sound, with great separation, less crowding in the lower frequencies and more definition in the mids and highs.

Sound quality score: 4 / 5

OnePlus Buds Pro 3 review: Value

OnePlus Buds Pro 3 review case closed OnePlus Pad 2 — (Image credit: Future | Alex Walker-Todd)

Superb sound for the price
You'll need to pay more for buds with superior ANC
Discounts bring strong rivals down to a similar price point

If you spend the majority of your time listening on your headphones, rather than talking, the OnePlus Buds Pro 3 impress with just how much they improve over the Buds Pro 2, while also serving up excellent sound outright, that belies their $179 / £199 asking price.

With the transitional pricing space they reside in, the OnePlus Buds Pro 3 serve as worthwhile alternatives to the likes of more established premium entries, like the Sony WF-1000XM5 (originally $300 / £260 but available today in the UK, at least, for as low as £190) or Technics EAH-AZ80 (available today for around $300 / £240), as well as more budget focused options, like the Bose-certified Moto Buds Plus (approximately $150 / £130).

Headphones today aren't just about listening, however, and so even with their comparatively paltry battery life, if microphone quality, ANC and Transparency mode are major factors for you, you'll likely want to cough up a little extra and go for a known quantity, like Apple's AirPods Pro 2 ($250 / £230) or the Bose QuietComfort Earbuds 2 (about $180 / £250 today).

Value score: 4 / 5

Should I buy the OnePlus Buds Pro 3?

Buy them if…

Don’t buy them if…

OnePlus Buds Pro 3 review: Also consider

How I tested the OnePlus Buds Pro 3

OnePlus Buds Pro 3 review in pocket — (Image credit: Future | Alex Walker-Todd)

Review test period: 1.5 weeks
Testing included streaming from different audio sources, including spatial audio supported videos
Switched between OnePlus, (other) Android, iPhone and PC devices

I used the OnePlus Buds Pro 3 every day for the duration of the review period, giving them an initial 10-hour burn-in before assessing sound characteristics.

I paired the Buds Pro 3 with all manner of devices, from Android phones made by OnePlus and other manufacturers, as well as iPhones and a Windows laptop. This was partially to test the likes of multipoint, as well as checking which feature, if any, were exclusive to certain device types or operating systems.

I used every feature that the Pro 3's software experience had to offer and tried the buds themselves in all manner of environments, with varying degrees of ambient noise to test features like ANC and microphone quality against.

As a reviewer with 13 years experience, and having reviewed numerous audio products – from Bluetooth speakers to a myriad of true wireless buds at a full range of price points – I felt confident assessing and scoring the OnePlus Buds Pro 3 in the context of the wider TWS earphones market in which it competes.

Sony WF-C510: Two-minute review

Sony is one of the biggest players in the audio market but its focus has always seemed to lean towards the elite, top-quality premium earbuds or over-ears market. The Japanese tech giant doesn’t need to break a sweat to keep on top of the best budget earbuds market though, if the new Sony WF-C510 are anything to go by.

The company’s follow-up to 2021’s Sony WF-C500, and a newer and more affordable alterative to the top-rated WF-C700N, these new earbuds come at a time when there’s more and more competition at the low-end of the market. I’d name some competitors but I don’t really need to – not when Sony’s offerings are this good.

In fact, I think the WF-C510 could draw some fans away from the top-end Sony WF-1000XM5 and the new sans-ANC entry-level AirPods 4. Who needs to pay double, triple or even quadruple the price when cheap and cheery gets you this far?

I really liked the sound of the new Sonys; I prefer sound that prioritizes clean treble over thumping bass, and so the Sony WF-C510 tick all my boxes and then some. Home-brewed Sony algorithms and a reasonably responsive equalizer just add to my enjoyment of the audio.

The design is stellar too – the buds stuck in my ears like the Abba songs they played stayed stuck in my head. Thanks to the nice grippy material used for the tips, and each earpiece weighing less than 5g, never once did a bud fall from my ears. I even cycled confidently with them and completed a full workout at the gym without gravity doing its thing to them.

This lightweight design extends to the case too, which is tiny and can easily disappear into a pocket. Unfortunately this does contribute to one of my gripes: the case only offers 11 hours of extra listening time, which is much less than basically any rival on the market.

The Sony WF-C510 on a bronze table. — (Image credit: Future)

That’s extra listening time over what the buds offer by default, but contrarily you can go 11 hours with these without needing to return them to the case. This is a fantastic amount of listening time, and the WF-C510 would be my first port of call over pricier rivals for long trips.

Part of the reason for this long battery life is that the Sonys don’t have ANC (Active Noise Cancellation), which is something I can’t knock the buds for as it’s a feature that’s never guaranteed at this price. Instead, they have an ambient mode which is pretty commonplace in wireless earbuds, but it’s only useful in certain situations so I didn’t use it much.

Noise cancellation isn’t the only feature that the WF-C510s lack: wear detection, low-latency mode, 'find my' locaters and a few other more premium perks don’t rear their heads here. Again, the price justifies this, but it’s something I’d be remiss not to flag – if you’ve got a certain mode or feature you love to use, you’d better check that the Sonys offer it.

Given that this is a two-minute review, I probably don’t have time to go into lots of detail about the other great parts of the Sony WF-C510, but between the responsive and easy-to-use touch buttons, the useful eartip fit test, the range of color options and the audio avoiding all the pitfalls I usually see in budget earbuds, I feel comfortable recommending these over some of the much pricier competitors I’ve tested this year.

Sony WF-C510 review: Price and release date

Released in September 2024
Cost $59.99 / £54.99 / AU$109

The Sony WF-C510 were released in September 2024 as the new entries in Sony’s WF-C line of low-cost earbuds.

You can pick them up for $59.99 / £54.99 / AU$109, and at that price point they’re in contention with our list of the best cheap earbuds. In fact, as of their launch, they’re Sony’s cheapest true wireless earbuds, drastically undercutting the $119 / £89 / AU$199 WF-C700N (which we gave five stars to in our review). The WF-C500 aren’t officially ranged by Sony any more, but they launched for $99 / £89 / AU$149 three years ago, and have seen price cuts from third-party retailers since.

The cheap earbuds market is a competitive one, with fresh competitors hitting the market all the time; in the months before this Sony proposition I've also tested the likes of the Earfun Air Pro 4 and CMF Buds Pro 2 for the same price. And the WF-C510 is my pick of the bunch.

Sony WF-C510 review: Specs

Sony WF-C510 review: Features

In-bud battery life is great – but the case less so
No ANC, but there is 'sound control'
Headphones app brings some extra features

Something I both love and hate about the Sony WF-C510 is the battery life.

The buds themselves have a fantastic battery life: 8 hours with sound control on, and 11 hours with it off, makes these Sonys some of the longest-lasting earbuds I’ve tested recently. However, the case itself only offers one extra charge-up, while basically all others on the market give you at least two extra charges. As a result, these buds gave me more battery anxiety on trips than most others I’ve tested.

That 11-hour figure is Sony's. In my testing, with sound control turned off, the right bud lasted for 10 hours and 42 minutes, while the left one was still somehow blasting out music 40 minutes later when my phone ran out of charge. Gaping inconsistency aside, that averages over 11 hours, so I'll concur with Sony's estimate.

Audio fans might be wondering why I’ve referred to ‘sound control’ and not active noise cancellation – this is because the Sonys don’t have ANC, but do offer noise cancellation in the form of an ‘Ambient Sound Control’ mode. This amplifies sounds around you, so you can be aware of what’s going on regardless of how much noise would otherwise be drowned out by your music. It’s a fine mode, with results that are more subtle and nuanced than the similar equivalent that many rival earbuds have, but ambient modes are generally quite situational so I didn’t find myself using it a whole lot.

Of course, ambient noise control isn’t the same as noise cancellation – it’s ANC you may want at home – but the passive noise cancellation offered by the ear-tips was enough to make me happy.

For the rest of the feature set we’re going to have to boot up Sony’s Headphones app, which, while a great addition at this level, has a logo so generic that I kept losing it on my phone’s menu.

Using said Headphones app, you can see the battery life of the earbuds, arrange which devices they’re connected to (up to two – yes, there's multi-point), toggle ambient mode off or on to a variety of intensities, play with an equalizer (including a test to find the best preset for you, and another to detect which eartips are best for you), set up 360 Reality Audio (Sony’s version of spatial audio), change what the buttons do, and enable Spotify Tap which basically makes Spotify play by default.

The equalizer gives you quite a few presets, with the ability to modify them too, and lots of the rest is par for the course. However, I found the EQ test quite confusing – unlike Nothing Ear’s fantastic automatic detection test, you basically have to ‘blind test’ some presets to see which you prefer. I found the difference between many of them inaudible, and sometimes I liked two equally. Ultimately, the mode is fine for people who know the sound they want (or the parts of recordings they usually augment), but for everyone else it’s perhaps not worth bothering with, although it does add value at this level.

Beyond ANC, there are a few features not present in the WF-C510 that some might miss, although I can’t hold these cheap buds to blame given the price. The major one is wear detection, so you have to pause music manually when you remove the buds. There’s also no low-latency mode which is quite common even amongst cheap buds, or any kind of ‘find my buds’ feature.

Another thing I should note, which is a problem I’ve had with other Sony audio products too, is that by default the volume sounds incredibly low – even when it shouldn’t. It’s because there’s a volume slider in the app, separate to your phone’s one, which I’d recommend you immediately raise to near-full intensity and rely on your phone’s volume rocker for control. The first time I used Sony headphones I thought they were incredibly quiet until I noticed this feature – what I should also note is that the in-app volume resets to 50% if you pair the earphones to a different device and then back to your phone, so you’ll need to rectify it manually. This is an irksome feature for people who are unaware, but even for those of us who’ve been using them for years, it’s an unnecessary extra step that most other earbuds don’t require.

Features score: 3.5/5

Sony WF-C510 review: Design

Incredibly lightweight case
Buds fit nice and snug – and don't budge
Convenient-to-use physical button

The Sony WF-C510 charging case is lovely and svelte – it’s one of my favorite cases for slipping into my pocket or bag.

A lozenge-shaped slither of plastic, it measures about 6.8 x 2.7 x 3.1 cm (all my measurements – I couldn’t find any on the Sony website) and weighs “approx” 31g (that’s Sony’s exact wording). Vague measurements aside, it’s really slender, with basically enough space for the buds and not much excess (which is probably why it doesn’t provide much charge!). Main points to note here are the USB-C port for charging, a small button for pairing and an LED status indicator. All par for the course, really.

I liked the textured plastic case, but I can see some finding it a bit cheap-feeling, and it does creak a little if you put pressure on it. That’s the trade-off with its light build.

The buds are equally light, weighing 4.6g each. At least Sony has an exact measurement for that! They’re in-ear buds so this particular figure is really important, as heavy in-ear buds (or those that aren't shaped carefully to distribute said weight) sometimes have trouble staying in the ear.

No issue for the Sonys though: they always felt rigid in my testing, never once falling out or even feeling loose. The box includes larger and smaller alternatives, with the app having an ear fit test, if the default tips don’t fit.

The fact that they fit and stay securely in my ears sounds simple enough, but so many competing options at double the price can't seem to do it. If you want cheap earbuds that don't budge and sound good, the Sony WF-C510 are it.

There are a few color options for the aspiring fashionistas out there: black and white are pretty standard, but there’s also light blue and light yellow. The latter hue is modelled by me in the pictures.

One feature of note on the WF-C510s is a button on each bud – it’s quite big, and takes up most of the body of each. It’s a physical button, meaning you have to actually depress it to trigger it, but I found it sensitive enough that it was easy to use. The size also ensures that you don’t have to keep jabbing at the bud, and shoving it into your ear, to trigger the function (which is customizable in the app).

In terms of waterproofing, the buds are IPX4 resistant to water, which means they’ll survive splashes from any angle, but not jets. That’s what the rating stands for but in real life the difference between ‘splashes’ and ‘jets’ isn’t always apparent so I’d recommend doing your best to keep these away from anything wetter than rain or sweat.

Design score: 4.5/5

Sony WF-C510 review: Sound quality

Bright sound; some might miss bass
High-quality given price
DSEE improves compressed music

I really like the sound of the Sony WF-C510s – obviously you have to set your expectations to a certain level with low-cost earbuds, but I found the audio high-quality and also certainly distinct in that Sony, "have this sound, and have it good and clear" way.

This is possibly thanks, at least in part, to Sony’s DSEE, which stands for digital sound enhancement engine – basically it’s tech that restores the range of the compressed audio tracks you’re playing from your chosen streaming service. It gives Sony earbuds, including the WF-C510, an edge over similar alternatives, as long as you remember to turn it on via the app.

The driver itself is a 6mm unit, so not necessarily as big as some similar-priced alternatives, but bigger than the more expensive WF-C700N.

The Sony WF-C510s have a slightly forward sound profile (and I say this as a compliment rather than a shortfall), offering clear and pronounced treble sounds like your guitars, vocals and piano parts. This is great for some genres of music, and I enjoyed listening to songs with prominent and distinct vocal lines that were beamed into my ears.

The flip side is that you can’t feel the bass quite as much in certain genres of music, which might be an issue for people who like their bass thumping to their back teeth. You can rectify it to a degree using the in-app equalizer, but not quite enough to please bass-heads.

I was surprised by the lack of peaking or distortion at normal listening volumes, and I had to really push the buds to a painfully-loud volume to hear any crackling, muddying or artefacts.

Sound quality: 4.5/5

Sony WF-C510 review: Value

Look at the price
Seriously, look at it

I’d consider the Sony WF-C510 great value for money even if the audio was only ‘fine’. It’s not, though, and fans of Sony's typical sound profile (that's most of us) will really love what they’re getting here.

If you’re being offered the Sonys as a gift or bundled with another Sony product, you might think you’re just getting some cheap buds thrown in to sweeten the deal, but trust me when I say these are better than their lowly price suggests.

Value: 5/5

Should I buy the Sony WF-C510?

Buy them if…

Don’t buy them if…

Sony WF-C510 review: Also consider

How I tested the Sony WF-C510

Tested for two weeks
Tested at home, in the office and on trips

The Sony WF-C510 enjoyed two weeks of listening time for this review, and as mentioned earlier I've tested a string of their closest rivals recently, which helped with the comparisons.

I tested the buds while they were paired to my Android smartphone, and I connected them to a different mobile to test multi-point pairing. Mostly I listened to music with Spotify but to fully test the buds I also tried other apps including games and streaming services. Testing was done at home, in the office and on various trips around my city, including walks in the park and gym excursions.

I've been testing gadgets at TechRadar for over five years now, and in that time have used plenty of budget earbuds and other Sony products. Outside of reviewing headphones, my trusty Sony WH-1000XM3 are my go-to headphones so I'm well versed in Sony's audio products and software.

First reviewed in September 2024

Read TechRadar's reviews guarantee

Hands-on Apple AirPods 4 with Active Noise Cancellation review: Higher-end features for all

3:20 pm | September 16, 2024

Author: admin | Category: Audio Computers Earbuds & Airpods Gadgets Headphones | Comments: Off

Apple AirPods 4 with Active Noise Cancellation: Two-Minute Review

When they're in the ear, at first glance the Apple AirPods 4 with Active Noise Cancellation might not look much different to the third-generation AirPods. However, the design has been streamlined for a better fit, while the internal hardware has been upgraded, with many of the best features of AirPods Pro 2 trickling down to Apple's new entry-level earbuds, making them a tempting option among the best AirPods.

For one, both styles of AirPods 4 – these and the standard version, which don’t offer noise cancellation – are powered by the Apple-made H2 chip that stretches the battery life, delivers excellent audio playback, and provides enough horsepower for Apple to offer Adaptive Audio on the AirPods 4 with Active Noise Cancellation.

While it doesn't entirely block out the world around you in the way that the best noise cancelling earbuds do – remember these are open-ear earbuds – when paired with music, it can reduce loud rumbles, like a jet engine, down to a drastically reduced sound.

I think folks who desire the ability to block out the world around them without fully sealing off the ear will find a nice middle ground here. The Transparency mode, as well as how these pick up the user's voice, is very well done and sounds incredibly natural.

You'll also be able to answer or decline calls with a shake of your head and press the stems for easy control, other than for adjusting the volume. Sadly, the ability to swipe to change the volume didn't trickle down from AirPods Pro 2. However, excellent audio quality with a wide soundstage did, and that's paired with support for Personalized Spatial Audio.

Overall, the AirPods 4 with Active Noise Cancellation make a bit more sense over the entry-level for the price and provide some future-proofing, but they also make an impact as powerful open-ear earbuds.

Apple AirPods 4 with Active Noise Cancellation review: Pricing and Availability

The Apple AirPods 4 with Active Noise Cancellation are priced at $179 / £179 / AU$299. They're available from September 20th, 2024, though are available to order already.

The $129 / £129 / AU$219 entry-level AirPods 4 do not offer noise cancellation, or, as their pricier siblings do, a Find My-enabled case and a couple of other features, but they still offer excellent audio quality and spatial audio support.

Apple AirPods 4 with Active Noise Cancellation review: Specs

Apple AirPods 4 with Active Noise Cancellation review: Features

Much like the AirPods Pro 2nd Generation, AirPods Max, or even the third-generation model that they replace, the AirPods 4 – with or without active noise cancellation – offer several useful features, which make them an excellent choice for anyone with an iPhone, or who’s otherwise invested in Apple’s device ecosystem.

After unboxing, you need to flip the lid open and hold the AirPods 4 near your iPhone to start the pairing process. You’ll see a prompt appear on the bottom half of your screen and can click ‘Connect’ to pair the AirPods 4 with your iPhone and your iCloud account for easy syncing between devices. I found that this process took just a few seconds to complete.

Fast-pairing and quick switching between devices have long been staples of AirPods, with the former dating back to the first generation, and they perform well here. Right after pairing, I was able to begin listening on my iPhone, and I could quickly switch to listening to audio on a 14-inch MacBook Pro or an iPad. Apple’s various platforms will even automatically switch your AirPods between devices based on what you’re actively using or playing audio on,, but I found this to be a little less helpful.

One very helpful feature here, though, is the arrival of gesture controls. First announced as an upgrade for the AirPods Pro 2nd Generation at Apple’s WWDC in June, these head gestures launch on day one with AirPods 4, allowing you to easily answer or dismiss a call with a simple head shake. Just in my few days of using the AirPods 4 this has come in handy several times, especially when my hands are full or I’m walking around town. It works for phone calls, FaceTime, and other calling apps that use Apple’s APIs.

Aside from nodding your head or saying “yes” or “no”, you can also press the stems, or press and hold, to trigger a few actions. A single press lets you play or pause, while a long press lets you select listening modes. While these open-ear earbuds won’t fully isolate you from your surroundings, the AirPods 4 offer active noise cancellation, transparency, and Adaptive Audio (blending those two) modes. You cannot, however, swipe or down on the stem to adjust the volume – the ability to do this on the AirPods Pro is super-handy, but seemingly, Apple wants to keep that feature for its flagship earbuds.

Apple’s H2 chip – the same chip found in AirPods Pro – powers all of these features, as well as the microphones, custom algorithms, and sensors. As I wrote in my hands-on review, after I tried the AirPods 4 with Active Noise Cancellation right after the launch event to quiet down a noisy space, they offer seriously impressive noise cancellation for open-ear earbuds or buds that don’t fully seal off the ear. In that space, with ANC engaged, the sound of the crowded space was muffled, and when music playback began, it was mostly quieted down.

On an airplane, it was much the same experience – you can get some peace and quiet with them, but they won't fully drown out the environmental noise as the AirPods Pro can. Part of this might be due to the fact that your body is feeling vibrations and wants to match them with sound, but I think another factor is that without the full seal and as you move your head, ambient sound has more opportunity to enter your ear. The result is that AirPods 4 block out most sound, but on an airplane – or a train – you’ll still hear the engine roar and even some cabin noise. Still, though, these effectively block out a lot of noise.

I’ve long thought that the AirPods Pro offered the best transparency mode, in which they intelligently let environmental sounds in and lower the decibels so as not to harm your ears. I think the AirPods 4 outpace those, though – with transparency mode enabled here, any sense of roboticness or noise being piped in is pretty much removed; with Conversation Awareness turned on, you can also effectively have conversations with folks quite naturally, at times even forgetting these are in your ears. Your own voice, or in this case my voice, sounds a bit more natural and less processed as well.

Apple AirPods 4 with Active Noise Cancellation review: Design

The AirPods 4 with Active Noise Cancellation don’t stray too far from the working formula of Apple’s other true-wireless earbuds. They opt for short stems like the AirPods Pro or the AirPods 3rd Generation that these directly replace. The curved portion of hard plastic that sits in your ear has been slightly redesigned and is now more curved, to provide a better fit in the ear.

I found the AirPods 4 to be pretty cozy in my ears. I comfortably wore them for over four and a half hours while on a flight and for countless hours with intermittent usage while working. They still just kind of plop in your ear and rest there. I didn’t have them fall out on any occasion, whether on a turbulent flight, while working out, or while walking indoors and outside in a bustling city.

The case is downright tiny given the smaller footprint that the left and right AirPods 4 with Active Noise Cancellation take up. It’s much smaller than the AirPods Pro 2nd Generation case, and even the case for the cheaper AirPods 4, and is shorter than the AirPods 2nd Generation’s case. You still flip it open to take out or put back your AirPods 4, and there’s a multi-purpose indicator light on the front.

There’s no back button on the back case for easy pairing, though. Instead, you’ll double-press the back to trigger pairing for other devices, including non-Apple ones. It’s an easter egg that Apple needs to publicize a bit more.

To charge the AirPods 4, you can plug them in via USB-C, though there’s no longer a charger in the box. If you get the AirPods 4 with Active Noise Cancellation, you can also place them on any Qi-wireless charger or Apple Watch charging puck.

In my testing, I found that with active noise cancellation, transparent, or Adaptive Audio enabled, you’ll get around four hours and 15 to 20 minutes of usage. That’s beyond Apple’s promised four hours of playback with a listening mode enabled. With no mode on, you can get about five to five-and-a-half hours of playback, depending on the volume you’re listening at. A quick five minutes of charging in the case also provides at least an hour of listening.

Apple AirPods 4 with Active Noise Cancellation review: Sound Quality

To sum up, the AirPods 4 essentially sound as good as AirPods Pro 2nd Generation, and, as with their predecessors, that’s without the buds providing a true seal of the ear. There’s a clear and rich audio mix with a fairly wide sound stage, but the real chef’s kiss here would be the Spatial Audio support.

Powering the audio experience is Adaptive EQ via the H2 chip, and pushing out sound is a custom high-excursion drive and a high-dynamic range amplifier. It’s also worth noting that there’s a single H2 chip in each bud, with audio sent over Bluetooth 5.3 from the connected device.

This all comes together to give you a balanced representation of the track you’re listening to, but if you’re listening to something that bops with more oomph the AirPods 4 with Active Noise Cancellation won’t shy away from raising the lower-end or really offering a surprising amount of bass for earbuds of this size. For instance, with Burnin’ Train by Bruce Springsteen, the track starts off with a rising guitar riff that’s quickly joined by drums, piano, and vocals all across the sound spectrum – it sounds sonically here and in lossless via Apple Music I didn’t notice any distortion or dropouts.

With a pop/EDM track like Apple by Charli XCX, you can see how the AirPods 4 handle layering of sound, with a surprisingly sharp bass track that doesn’t distort with the singer’s vocals on top at higher frequencies, with various electrical beats in between. The AirPods 4 tend to handle almost all genres well, and even without a full seal, deliver a great balanced mix, although at higher volumes you will have some sound leakage.

Spatial Audio here essentially gets rid of stereo’s left and right channels, with various elements of a track flowing around you. It’s a more immersive listening experience, and Apple’s implementation here is excellent. I particularly like spinning it with a live track, but I think the album version of Down On The Corner by Creedence Clearwater Revival is one of the best examples. Not to mention, it also works with some movies and TV shows to put you right in the middle of the action.

Apple AirPods 4 with Active Noise Cancellation review: Value

At $179 / £169 / AU$279 with active noise cancellation or $129 without, AirPods 4 offers a variety of features previously found only on Apple’s most high-end earbuds. The new design language streamlines the AirPods' appearance, as they all look similar.

If you’re sold on open-ear earbuds or ones that lack silicone tips, AirPods 4 are likely your best bet if you want to be within Apple’s ecosystem. The higher price might only be $70 away from AirPods Pro, but you still get a lot of value for the price: three listening modes, a comfortable open-ear design that doesn’t fall out, solid battery life, and a findable case should they go missing.

The $129 / £129 edition of AirPods 4 will lose the listening modes and the Find My enabled case, but it still offers a rich, crisp audio experience, all of the handy Apple ecosystem features, and support for Spatial Audio.

Should I Buy Apple AirPods 4 with Active Noise Cancellation?

Buy them if...

If you want an open-ear fit that works in the Apple ecosystem

Replacing AirPods 2nd and 3rd gen, AirPods 4 are the new open-ear, non-ear sealing earbuds that work extremely well with the iPhone, iPad, Apple TV, and Mac.

Don't buy them if...

If you want the best noise cancellation in an earbud

Considering AirPods 4 with Active Noise Cancellation don't seal off your ear with a silicone ear-tip, these earbuds won't block out all environmental sound. So if you're looking for that consider another pair like AirPods Pro 2nd Gen or one of the best wireless earbuds from elsewhere.

How I tested Apple AirPods 4 with Active Noise Cancellation

For the past several days, I've been living with and using Apple's AirPods 4 and AirPods 4 with Active Noise Cancellation with an iPhone 15 Pro Max, iPad Mini, iPad Pro, 14-inch MacBook Pro, Apple Watch Ultra 2, and Apple TV 4K.

I tested audio playback, standard, and Spatial Audio tracks in various locations to gauge and track performance and see if there was sound leakage since these are open-ear earbuds. I threw various tracks across genres at AirPods 4, streamed from Apple Music, Spotify, YouTube Music, and Nugs.net.

I used active noise cancellation, transparency, and "Adaptive Audio" listening modes in various locations, including at home, in an office environment, while walking around a city, on a train, in a car, and on a plane. I tracked and measured how long the battery lasted with these modes on and off and the charging time.

First reviewed September 2024.

Edifier D32 review: a retro-look wireless speaker that supplies detailed audio

5:30 pm | September 12, 2024

Author: admin | Category: Audio Computers Gadgets Hi-Fi Wireless & Bluetooth Speakers | Comments: Off

Edifier D32: Two-minute review

Looking for a fresh wireless speaker, which combines old-school charm with hi-res audio capabilities? Thought so. Well, you’re in luck, because the Edifier D32 is just that and at a very reasonable price too.

This amp-like tabletop speaker is a very solid entry from the Chinese audio specialists Edifier and delivers clean, balanced, delicate sound. The Edifier D32 is compatible with both the LDAC and ALAC (when using AirPlay) audio codecs, meaning you’ll get access to hi-res audio regardless of whether you’re an Android or iPhone lover. As well as Bluetooth 5.3 or the 5GHz and 2.4GHz dual-band Wi-Fi module, there’s also AUX and USB-C wired options if you’d prefer, making the Edifier D32 a very versatile option.

Whether you’re a rocker, folk fan or classical connoisseur, the Edifier D32 will deliver talented sound that’s sure to impress you or your esteemed guests. It handles treble frequencies most competently, delivering more delicate sounds with accuracy and precision. Mid-range sounds are also well-weighted with imperfect, yet respectable levels of detail on offer. Even bass comes through with a degree of impact and depth, making for a good all-round listening experience. OK, drum and bass lovers may feel that sub-bass is a bit lacking; audiophiles may even sense that separation doesn’t match up to some of the best wireless speakers. But the vast majority of listeners are sure to like what they hear.

Sound is customizable too, thanks to the Edifier ConneX app. This free companion app allows you to adjust the EQ via a number of presets or a custom option. However, that’s pretty much it as far as in-app features go, so don’t expect anything super fancy here.

Another decent, but non-standout factor is the Edifier D32’s battery life of 11 hours. Some competitors, like the JBL Authentics 300, for instance, can only manage eight in fairness – although a lot of competitors, like Marshall's Stanmore, can give you 15 hours with its retro-style multi-room speaker. This should still be enough for the average gathering, of course, but if you want a speaker for parties or similar events, there are a lot of other low-cost options that offer far superior playtimes.

Potentially the biggest draw of the Edifier D32 is its design. Sure, the JBL Authentics and Marshall Stanmore products have done similar things, but this is considerably cheaper than most options in these lines. The Edifier D32 does a lot right aesthetically, with an attractive, textured outer casing and golden speaker grille. However, some of the gold detail on the White model (which I tested) makes for a slightly less-than premium appearance due to its plasticky look. If you’re looking for the classiest option on the market, this is likely not going to cut it, but it does still keep that old school vibe alive – as long as you don't look too closely.

It’s looking pretty positive for the Edifier D32 here. For what it sets out to do, it succeeds on almost every metric. It may not be a perfect 10 looks-wise or particularly feature-rich, but these things aren’t going to be a number one priority for most. After all, when it comes to audio quality, the Edifier D32 offers plenty of bang for your buck. It’s not the top performing speaker on the market, sure, but with hi-res output using your home's Wi-Fi network,, talented all-round sound and EQ customizability, you’re almost certain to be satisfied with what’s on offer.

So if you’re the nostalgic type and want adept audio at a not-so daunting price, I would recommend the Edifier D32. For lovers of big bass, party vibes and the great outdoors, though, this is probably not for you and I’d recommend checking out our guide to the best party speakers instead.

Edifier D32 on wooden surface — (Image credit: Future)

Edifier D32 review: price and release date

$199.99 / £179.99 (about AU$300)
Launched on March 2024

The Edifier D32 is available for a reasonable price, given you get hi-res audio, a decent amount of bulk and several good connectivity options, including Wi-Fi and Bluetooth streaming. It has a list price of $199.99 / £179.99 (about AU$300), which is considerably cheaper than a lot of the speakers in JBL’s Authentics line, for instance, a model that attracts those looking for a similarly retro vibe.

The D32 also launched in March 2024, so it still has that fresh feeling about it. Sure, its build quality isn’t quite as high as alternatives from Marshall or JBL, but the savings you recoup even things out nicely.

Edifier logo on the Edifier D32

(Image credit: Future)

Edifier D32 review: Specs

Reverse side of the Edifier D32 with AUX, USB-C and AC adapter ports — (Image credit: Future)

Edifier D32: Features

Apple AirPlay2, Bluetooth 5.3 and wired connectivity options
Companion app compatibility
Average battery life

Features-wise, the Edifier D32 does a lot more than its looks suggest. Firstly, it’s worth noting that it has a good set of connectivity options, which include: Bluetooth 5.3, 5GHz and 2.4GHz dual-band Wi-Fi (and Apple AirPlay), USB-C and AUX for wired listening. Specifically, the Edifier D32 supports Apple AirPlay 2, meaning that you can Wi-Fi stream music using iOS devices, Apple TV, and computers with iTunes installed.

When harnessing Bluetooth connectivity (except when streaming using LDAC), you get access to multipoint connectivity. If you’re hosting a gathering and both you and a friend want to queue up some tracks, it's best to stick to Bluetooth.

If you download the Edifier ConneX app, you can access a few more features, but things are admittedly pretty limited. The only real feature available is what Edifier calls ‘Sound Effects’, which is just an EQ calibration tool. You can select from one of five options: Classic; Monitor; Dynamic; Vocal; or Customized. Although all of these have distinctive sound profiles, I only really found myself using either the well-balanced Classic mode, which enabled me to pick out more sonic details, or Dynamic, whichdiminishes highs in favor of more booming bass.

The app doesn’t have much more going for it really. You can check battery life (although it annoyingly only shows percentages as a multiple of 20), toggle multipoint, turn speaker prompt sounds on or off and view the user manual. That’s basically it – and I’m not really complaining. After all, there’s not a whole lot more I’d expect from a wireless speaker at this price point.

When it comes to battery life, the Edifier D32 is pretty average. Edifier claims that this speaker has a playtime of 11 hours, which I found to be relatively accurate. After playing music at 30% volume for eight hours, the speaker still had 40% of its charge remaining, but of course, if you play at higher volumes using hi-res quality it will die far sooner. Although the Edifier D32’s playtime can’t rival retro-looking competitors like the Marshall Emberton 2, with its 30-hour battery, 11 hours will almost definitely be enough for playing tunes at a party or gathering.

It would be nice to have something akin to a battery saver mode, like JBL’s Playtime Boost, or a setting to calibrate the speaker’s sound to its surroundings, like Marshall’s Placement Compensation. But, all in all, the Edifier D32’s feature-set is decent.

Features score: 3.5/5

Button controls of the Edifier D32 — (Image credit: Future)

Edifier D32: Sound quality

Well-balanced hi-res audio
Crisp highs and clean bass
Impressive levels of detail for price

OK, so you’re not going to lose your mind over how good the Edifier’s D32 audio sounds, but it’s undeniably strong for its price. Firstly, it’s worth noting that I mainly used the D32’s more balanced EQ preset, Classic, when listening to tracks, although I did dip into Dynamic mode for more bass-heavy bangers.

Something I was delighted to find, straight off the bat, is that the Edifier D32 supports the LDAC codec, which processes audio up to 24-bit/96kHz. This is wonderful news for anyone with a modern Android phone, as almost all of these support the codec. The D32 also supports Apple’s ALAC ‘lossless’ audio codec, but only if you’re using AirPlay mode – ie over Wi-Fi. Even some of 2024’s more expensive Bluetooth speakers – like the JBL Xtreme 4 – don’t support any lossless codecs, (because remember, Bluetooth streaming by its very nature incurs loss) so this is a big win for a speaker costing less than $200 / £200 / AU$300.

OK, so the Edifier is compatible with some levelled-up Bluetooth codecs and AirPlay support using Wi-Fi, but how does it actually sound? Well, I whipped out my trusty FiiO M11S and opened up Tidal to give it a whirl and was pleasantly surprised by the quality on offer. I tuned into Black Eye by Allie X and the Edifier effectively captured the dynamism of the intro’s bass bouncing up to the mid-range, resulting in a controlled yet energetic sound. The Edifier can achieve respectable bass depth; for instance, deep synths placed throughout the song 635 South by FORQ sounded very clear, maintained their boom and didn’t distort, even at higher volumes.

It’s not an entirely perfect picture when it comes to low-frequencies, though. If you’re looking to hear imposing bass, you might want to look elsewhere. For instance, when listening to Diva Bonita by bbno$, the sub-bass was a little lacking for clout and impact in the mix. I tried the (admittedly more expensive) JBL Xtreme 4 and it was able to perform better in this department, so if you’re really into ultra low-frequency rubbles and feels, weigh up other options.

However, it’s not about bass with the Edifier D32. With its retro aesthetic, it’s clearly not trying to be a party speaker with intense low-end capabilities, even though it’s still very much competent in this area. And the positive news is the D32 sounds very good overall, with both rich mids and elegant highs.

I listened to Rains again by Solji and the rain sound effects in the intro sounded pretty natural, with the vocalist’s delicate, high-pitched vocals coming through in a crisp manner and retaining their atmospheric edge. There wasn’t any noticeable warping or distortion when listening to this track and even when flicking through the TechRadar testing playlist, I constantly felt that songs relying on treble performance sounded neat.

The Edifier D32 isn’t always the best with more subtle details. For instance, the electric guitar throughout Young Blood by The Naked and Famous was a bit more muted in the overall mix than I would’ve liked. When returning to Black Eye by Allie X, I similarly sensed that light electronica in the middle of the track was a bit lacking – noticeable, sure – but just not as clear-cut as it could be. This is nitpicking I accept, especially given the price you pay, but it is my job to do so.

All in all, the Edifier D32 may not be the boldest-sounding speaker on the market and it may not possess the ability to paint perfectly accurate sonic pictures – but that doesn’t prevent it from being a great-sounding wireless speaker. You’re still getting super-clean, on-beat, hi-res audio certain to impress. If you’re looking for a more party-ready speaker with the most hard-hitting bass, this isn’t the optimal choice, but if you want high-quality audio for laid-back listening, the Edifier D32 is a strong option.

Sound quality score: 4/5

'Hi-Res Audio' label on the front of the Edifier D32 — (Image credit: Future)

Edifier D32: Design

Retro aesthetic
Gold details a bit cheap-looking
Designed for tabletop play but has decent portability

Whether you’re a guitarist, rock fan, or just one of those people that claims to be ‘born in the wrong generation’, the Edifier D32’s design is likely to appeal to you. That’s because it has a retro, amp-like look that is fitting for those hoping to add a splash of vintage flair to their living space. I tested the White color variant and found that the bronze speaker grille and outer casing were stylish and satisfying on the eye.

However, I’m not gonna lie: the overall look of the Edifier D32 is slightly ruined by the golden finish on the protruding button controls, feet and outer rim. The plasticky, gold finish looks a bit cheap; tacky even. This prevents it from exuding the classy vibe of Marshall’s Emberton or Stanmore lines for instance, and it damages the retro look Edifier was going with here. This speaker is by no means bad to look at, but the inconsistent quality did stop me from falling head over heels, design-wise.

Although I wasn’t a massive fan of the look of the buttons, they’re fairly easy to use. There are power, Bluetooth, play/pause and volume controls, all of which are super-straightforward with the exception of one. That exception is the power button, which has a light panel that can flash in nine different ways, including different colors and flashes. You’ll need to consult the user manual to understand what each of these means, because at first, I found myself baffled by whether the speaker was on, off, or somewhere in between.

Otherwise, this is a pretty practical device. It’s only a little bit heavy at 6.7lbs / 3kg and has a handle on the back of the speaker for easier transportation. Really, though, this isn’t the best option if portability is crucial for you. But for a tabletop wireless speaker, I’d argue that it’s the perfect size – not huge and overbearing, but not too small to deliver quality, room-filling audio.

In order to deliver that room-filling audio, the D32 holds two 15W silk dome tweeters as well as what Edifier calls a "long-throw, mid-low" driver. They’re encased in an MDF cabinet, designed to reduce resonance and distortion. This setup definitely helps to deliver a strong balance of loudness and clarity, making the Edifier D32 very pleasant to listen to.

Overall, this isn’t the most elegant retro-style Wi-Fi speaker on the market, but it’s considerably cheaper than comparable alternatives from JBL and Marshall. It may be the case that you, reader, think I’m terribly mistaken about the gold looking tacky! However, one thing that can’t be disputed is that this is a nicely weighted and sized tabletop speaker that still offers adequate portability – combine that with the strong audio quality on offer and you’re onto a winner with the Edifier D32.

Design score: 3.5/5

Handle on the reverse side of the Edifier D32 — (Image credit: Future)

Edifier D32: Value

Much cheaper than similar competitors
Great sound quality for the price
There are still cheaper alternatives out there

Let’s be clear: if you’re looking for a super low-price Bluetooth speaker, the Edifier D32 is probably not your best option. Sure, it’s inexpensive compared to a lot of its rivals, but there are plenty of good Bluetooth speakers out there closer to the $100 / £100 / AU$200 mark.

However, if you’re specifically on the hunt for a tabletop speaker with an old school vibe, this is really strong in the value department. You get both wired and wireless (Wi-Fi and Bluetooth) higher-resolution audio, strong connectivity options and companion app compatibility all for $199.99 / £179.99 (about AU$300). That’s not bad at all, especially considering that the cheapest in JBL’s Authentics line, the JBL Authentics 200 has a list price of $349.99 / £249.99 / AU$499.95.

What matters the most with a wireless speaker is sound – and the Edifier D32 performs very nicely in this category. When you couple that with the appeal of its design and consider the high cost of competitors, the Edifier D32 is a very solid value pick.

Value score: 4/5

Corner of the Edifier D32 — (Image credit: Future)

Should I buy the Edifier D32?

Buy it if...

You’re looking for a retro-style speaker
If you’re the nostalgic type, this could be the perfect wireless speaker for you. With its amp-like grille, textured outer casing and tabletop design, the Edifier D32 is a solid-looking speaker. It may not have the build quality that you’ll see from the likes of Marshall, though, so bear that in mind if you want a more premium look.

You’re craving hi-res audio quality
The Edifier D32 offers wired and wireless hi-res audio at a very reasonable price, so if you’re an audiophile on a budget it's a strong option. With both LDAC and ALAC compatibility, it doesn't matter if you have an Android or Apple device, you’ll have access to hi-res quality regardless.

Don't buy it if...

You need a party speaker
If you want a booming, party-ready speaker, this shouldn’t be your go-to. The D32 handles low frequency sounds nicely, but it's not exactly optimized for bass-heavy bangers and, when it comes to sub-bass, you’re not going to be blown away. It’s totally capable of playing music to a high standard, sure, but it has no waterproof or dustproof rating for outdoor parties and can only be paired with more speakers via Airplay – not so practical if you have limited or no Wi-Fi.

A broad feature-list is a priority for you
There’s not a lot to play with on the Edifier ConneX app, so if you’re someone that’s big on customizability, you’ll likely be a bit disappointed. You can adjust EQ settings, but in terms of actual features, that’s basically it.

Edifier D32: Also consider

JBL Authentics 300
The JBL Authentics 300 is a tabletop speaker that is slightly reminiscent of a (very chunky) vintage handbag, but that’s not necessarily a bad thing. This beast of a speaker boasts bold audio, Wi-Fi connectivity and fantastic portability. You can often find the Authentics 300 for much less than its list price (I’m talking $100/£100 less), so the price difference isn’t quite so drastic. This won’t be the perfect alternative for everyone though, especially given its slightly underwhelming battery life and lack of support for any fancy audio codecs, so you’ll have to weigh up whether the extra spend is worth it. We’re yet to get our hands on the JBL Authentics 300, but we have tested its more expensive sibling the JBL Authentics 500, which earned plenty of praise.

Marshall Emberton 2
OK, a bit of a curveball coming your way. Is this thing a like-for-like comparison with the Edifier D32? Well, not exactly. It’s way smaller and lighter, it's Bluetooth only, and won’t offer quite as imposing audio. But it does rock a similar retro design and is perfect for tabletop play. It isn’t going to set you back as much as the D32 and it also offers an incredible battery life of 30+ hours and an IP67 dustproof and waterproof rating. If value is what you care about most, this might not beat out the Edifier D32 entirely, but if you want more portability and longevity, this could be a better pick for you. Read our full Marshall Emberton 2 review.

Edifier D32 review: How I tested

Reverse side of the Edifier D32 — (Image credit: Future)

Tested for two weeks
Used in the office and music testing studio
Tested using Tidal on Fiio M11S and Samsung Galaxy Z Flip 4

I spent hours listening to music on the Edifier D32, testing it across its various sound modes and at differing volume levels. I predominantly used the speaker in our music testing room for assessing audio quality and battery testing.

I used Spotify on my Samsung Galaxy Z Flip 4 and Tidal on the Fiio M11S hi-res music player to stream tracks from our carefully curated TechRadar reference playlist. This included songs with pumping deep bass, delicate vocals, and complex mixes, enabling me to test a speaker’s full range and dynamism across different frequencies. I also used the JBL Xtreme 4 as a point of comparison, when appropriate.

First reviewed: September 2024
Read more about how we test

AirPods 4 review – Seriously impressive noise cancellation for no ear tip earbuds

8:05 pm | September 10, 2024

Author: admin | Category: Audio Computers Earbuds & Airpods Gadgets Headphones | Comments: Off

Hands-on AirPods 4 review: Two-minute preview

AirPods fans take notice: You no longer need to go Pro to get active noise cancellation. Furthermore, Apple has answered the call if you have a distaste for ear tips or simply don’t want your ears sealed off.

AirPods 4 are now official and come in two flavors: just AirPods 4 at $129 and AirPods 4 with Active Noise Cancellation at $179. After spending some time with the iPhone 16 and Apple Watch Series X, I dashed over to the AirPods 4 on display. I got the chance to briefly test the higher-end option – including putting the noise cancelation to the test in a noisy, loud, and crowded hands-on area.

For one, the case is very compact and tiny, appearing smaller than the AirPods Pro or even the third-generation AirPods. In fact, it’s kind of like a shorter AirPods second-generation carrying case in terms of width across. You should have no issue bringing these with you and fitting them within most pockets.

Apple AirPods 4, bottom of case. — (Image credit: Future/Jacob Krol)

AirPods 4 with Active Noise Cancellation also trickles down some of my favorite features of the AirPods Pro case. Bluetooth Low-Energy is inside and a speaker, making the case here findable within Find My. So, if you lose it, you can ping it from another Apple device to help you find it. There is also a USB-C port for charging, and a cable comes in the box, but the rear here also supports recharging with an Apple Watch charger or a standard Qi charger.

Flip open the lid, and you’ll find the left and right AirPods 4, which Apple dubs the “best-fitting AirPods ever.” I’ll need to spend more time with them, but they’re very compact, with short stems containing the force sensor for intuitive controls. However, the overall look is similar to that of AirPods' third generation.

Apple has redesigned the fit here to better stay in the ear, be comfortable for an extended period, and for the best acoustic performance. I found them comfortable during my brief demo, and even with a few headshakes, I couldn’t get them to fall out. However, I haven’t had that issue with previous open-ear style AirPods like the first-, second-, or third-generation models.

With their lack of silicone ear tips, AirPods 4 rest in your ear and won’t fully seal it off from the world around you. With no audio playing and no listening mode on, you will still hear a good bit of the world around you. With the H2 onboard here and the higher price, these feature listening modes, though.

These seriously impressed me in my brief demo – I started with Transparency mode engaged and 1901 by Phoenix playing in the background at a low volume. I could hear the track playing and the noisy crowd of folks demoing other gadgets around me, albeit at a slightly lower volume. The overall audio mix was vibrant and crisp. I couldn't test out "Personalized Spatial Audio" in this space, but AirPods 4 does support it.

AirPods 4 in hand — (Image credit: Future/Jacob Krol)

When I engaged the AirPods 4's Active Noise Cancellation feature and had the track playing, it pretty much lowered the volume of the crowd completely – this was with audio at about 60-70%. At a lower volume, that crowd roar can still be there a bit, but considering the open style of AirPods 4, these performed way better than I had initially anticipated. I’m curious how these might perform with blocking out noise in other situations, be it a plane or a place with a roaring HVAC system. I didn’t get the chance to try Adaptive Audio here, but I look forward to testing that and seeing how it handles blending transparency and active noise cancellation together.

That about sums up my first impressions of AirPods 4 with Active Noise Cancellation. For one, they make noise cancellation more affordable within the AirPods lineup – though $179 is still not the cheapest – and also deliver a potentially more comfortable fit for folks who don’t like ear tips. I especially like that it ushers in some of the nicer-to-have features of AirPods Pro, like Find My for the case and the H2 chip, which should deliver great sound playback. AirPods 4 will also feature gesture controls like nodding your head up or down to answer a call or left and right to ignore it.

AirPods 4 tour in case — (Image credit: Future/Jacob Krol)

You can also use “Hey Siri” hands-free for things like sending a message or asking a topical question. Apple promises five hours of playback on a full charge and 30 hours with recharges in the case. If you engage Active Noise Cancellation, Transparency, or Adaptive Audio, that will drop to 20 hours with recharges.

Of course, if you don’t need noise cancellation and can live without wirelessly charging the AirPods case, the $129 AirPods 4 might be a better fit – pun intended – and won’t be as big of a hit on your wallet. These have the same fit from the redesign and have the H2 chip inside.

@techradar
♬ original sound - TechRadar

Hidizs S8 Pro Robin review: the tiny DAC/headphone amp that almost could

1:00 pm | September 8, 2024

Author: admin | Category: Audio Computers Gadgets Hi-Fi | Comments: Off

Hidizs S8 Pro Robin: Two-minute review

The idea of taking the crucial business of digital-to-analogue conversion duties away from your smartphone (which has plenty of other stuff to be getting on with) and doing it properly using a dedicated USB dongle is not a new one – our guide to the best portable and desktop DACs is proof. And the idea of making the price of this USB dongle as aggressive as possible is not especially new, either. But Chinese specialist Hidizs thinks that with the S8 Pro Robin, it has perfected the balance between ‘price’ and ‘performance’.

Certainly this little device looks more expensive than it is, both on paper and in the palm. Specification that includes a balanced architecture DAC arrangement from Cirrus Logic, proper hi-res audio 32bit/384kHz and DSD256 compatibility, and balanced and unbalanced outputs all bode well, as do low weight, tidy dimensions and build quality that makes good use of glass and aluminium.

And up to a point, the Hidizs S8 Pro Robin makes good on its promises. The sound it delivers via a pair of Sennheiser IE900 IEMs when compared to that handed over by an Android smartphone and an Apple laptop is altogether bigger, more detailed, better organised and more dynamic. Where all of these things are concerned, it’s an unarguable step forward.

It doesn’t take long to reveal one or two shortcomings, though. The S8 Pro Robin is no fan of the sort of squashed MP3 files that are Spotify’s stock in trade – it makes the compression they have undergone obvious, and compared to the work it does when given something of 16bit/44.1kHz resolution or above to deal with, they sound rather flat and undemonstrative.

And no matter the quality of the digital audio file you ask the Hidizs to deal with, it renders the top of the frequency range thin and hard. Treble sounds are edgy and splashy, and only get edgier and splashier the louder you listen. This skewing of the frequency range makes the S8 Pro Robin sound rather lopsided, and its top-end characteristics are tiring.

Hidizs S8 Pro Robin on a white table, with a smartphone — (Image credit: Future)

Hidizs S8 Pro Robin review: Price and release date

Released in May 2024
Priced $79 / £59 / AU$119

The Hidizs S8 Pro Robin USB DAC/headphone amp is available now, having hit shelves (in most regions, at least) in May 2024, and in the United Kingdom it sells for £59. In the United States it goes for $79, while in Australia it costs AU$119.

This is not a lot of money for a USB DAC/headphone amp, it hardly needs saying – our favourites from the likes of Astell & Kern and Helm Audio cost well into three figures. But then again, a bargain is only a bargain if it’s fit for purpose…

Hidizs S8 Pro Robin review: Features

32bit Cirrus Logic DACs
3.5mm and 4.4mm outputs
Supports up to 32bit/384kHz and DSD256 resolutions

Yes, the S8 Pro Robin is small and affordable. But that hasn’t prevented Hidizs from including quite a number of highlights where features are concerned.

For example, the S8 Pro Robin is compatible with pretty much any operating system – attach it to a source of music using the USB-C slot on the bottom and it can play nicely with Windows, every Apple OS, Android and Harmony. And at the opposite end of its little chassis there are both 3.5mm and 4.4mm output sockets - so headphones with balanced or unbalanced terminations can be connected.

It’s in between, though, that the real action is. The Hidizs uses balanced DAC architecture via a couple of 32bit Cirrus Logic CS43131 chipsets, and this allows it to support PCM up to 32bit/384kHz resolution and DSD256. Which means it has its Hi-Res Audio certification and the badge to prove it.

Six digital filters offer a small degree of input into the eventual sound of the S8 Pro Robin – these can be accessed by simultaneously pressing the ‘volume up’ and ‘volume down’ buttons on the side of the chassis. The indicator light on the glass front panel briefly flashes in one of six different colours to let you know which particular filter you’ve selected, before it reverts to a colour that indicates the type and size of digital audio file you’re listening to.

Features score: 5 / 5

Hidizs S8 Pro Robin review: Design

Aluminium frame
58 x 23 x 11mm (HxWxD)
17g

Hidizs has done the sensible thing, and made the S8 Pro Robin as small and light as realistically possible. At just 17g you won’t even notice it in your pocket, and at 58 x 23 x 11mm (HxWxD) it’s about as unobtrusive as these things ever get.

It’s nicely built and finished, too. The frame is aluminium, and the front and back panels are of glass - it’s quite a tactile little thing. On the front there’s an illuminated company logo, and on one side three little control buttons. The bigger button in the centre is ‘play/pause’, and it has a volume control on either side. Press both ‘volume up’ and ‘volume down’ together and you can cycle through your filter options.

Design score: 5 / 5

Hidizs S8 Pro Robin review: Sound quality

Enough power to drive even quite tricky headphones
Open and detailed presentation
Insubstantial top end can get tiring

The most important job the S8 Pro Robin has to do is make your headphones (and we truly hope you've chosen something from our best wired earbuds or best wired headphones buying guides here) sound better than when they’re plugged directly into your laptop or smartphone – and it can most certainly do this. Plugged into an Apple MacBook Pro or a Samsung Galaxy S21 Ultra at one end and a pair of Sennheiser IE600 at the other, the difference the Hidizs can make to your experience is significant.

A 16bit/44.1kHz FLAC file of Mary Lattimore’s We Wave From Our Boats sounds fuller, more open and quite a lot more detailed in every department. There’s greater heft to low frequencies, a more spacious rendering of the midrange and a whole lot more bite and attack at the top of the frequency range (which, as I’ll get to, is not an entirely positive trait). Dynamic headroom is improved, soundstaging is more convincing, and there’s greater positivity to the way rhythms are expressed.

Move upwards in resolution from there and all of these positives continue to apply. Go in the other direction, though, with a listen to a 320kbps MP3 file of Idles’ Never Fight a Man with a Perm and the S8 Pro Robin can’t hide its dissatisfaction. Its dynamic response is underwhelming, and the overall presentation is, when compared to what it’s capable of with bigger files, flat and undemonstrative. To say that it doesn’t sound like much of an improvement on the unassisted sound of the source players tells you all you need to know.

Still, it’s simple enough to avoid this just by avoiding listening to horribly compressed content from Spotify’s free tier. What’s impossible to avoid is the hard, unyielding nature of the Hidizs’ high-frequency reproduction. The character of the treble sound is at odds with the rest of the frequency range, and the thin, insubstantial top end is tiring and ultimately not especially pleasant to listen to. And don’t, whatever you do, turn the volume up too far – the relentless nature of the high-end reproduction here is just compounded by loudness.

And it’s also worth noting that this top-end unpleasantness is exacerbated by the majority of the filter options that are available here. In fact, there’s only one filter (called ‘deem phasis filter’ on the Hidizs website – I suspect it’s actually a de-emphasis filter, and its corresponding colour on the fascia is blue) that gets anywhere close to calming the DAC’s treble response – and consequently that’s the one I selected when conducting this test.

Sound quality score: 3 / 5

Hidizs S8 Pro Robin review: Value

In some ways, the Hidizs S8 Pro Robin represents unarguable value. For not very much money at all, it can turn your smartphone or laptop into a much more viable source of music, and as such is a gift for your wireless headphones.

Sonically, though, it’s not quite the finished article – and anyone who’s especially sensitive to high-frequency sound is unlikely to enjoy the way it goes about things. All of which means it probably only offers middling value for money.

Value score: 3 / 5

Should you buy Hidizs S8 Pro Robin?

Buy it if...

Don't buy it if...

Hidizs S8 Pro Robin review: Also consider

How I tested the Hidizs S8 Pro Robin

With an Apple laptop and a Samsung smartphone
With content from Spotify and Tidal
Connected to Sennheiser IE600 headphones via the balanced output

As a process, there’s really not much to describe here. For the best part of a week I listened to the S8 Pro Robin while it was connected to either an Apple MacBook Pro or a Samsung Galaxy S21 Ultra using the USB-C input – Sennheiser IE600 wired in-ear headphones were connected to the 4.4mm balanced output. And then I listened to a variety of music, of a variety of genre and a variety of file types and sizes, from the Spotify and Tidal apps loaded on to both devices.

Read more about how we test

First reviewed September 2024

Morel Biggie review: a small yet mighty wireless speaker that’s minimal to a fault

2:30 pm | September 7, 2024

Author: admin | Category: Audio Computers Gadgets Hi-Fi Wireless & Bluetooth Speakers | Comments: Off

Morel Biggie: Two-minute review

The Morel Biggie is the smaller sibling of Morel’s Högtalare (Swedish for speaker) – and is ironically named, given its compact size. But don’t let that fool you, because sonically it packs a punch.

It oozes class thanks to its superb engineering, evident from the perfectly planned surfaces on every side. It’s hard to imagine it looking out of place in any home, especially given the myriad colorways available. But home is where you’ll want to keep the Biggie, because even though Morel describes it as a portable speaker, it’s still too big and heavy to be carried around easily.

True to form, the Biggie’s feature set is similarly spartan, even for a Bluetooth-only speaker. One for our best Bluetooth speakers buying guide? Well, there’s no app to control or alter its settings, which is a pretty big omission and one the bulk of the competition (even at much lower price-points) does offer in 2024. There are five buttons for operation, but the only additional interface feature is the battery level indicator. And this is poorly implemented, requiring you to hold both volume buttons to reveal the level via the LEDs of all five buttons, which is far from precise.

As for audio features, the biggie (sorry) is Auracast compatibility, which allows you to join Auracast audio streams, designed for broadcasting to an unlimited number of playback devices. You can also use two Biggies in unison for stereo playback, although I was unable to test this feature as I was only given one unit to review.

The Biggie makes a strong impression on first listen, bellowing out the bass notes and creating a sense of space that rivals some of the best Bluetooth speakers out there. Mids and highs are mostly clear and detailed, but there are too many occasions when that low-end dominates the sonic space, masking the subtleties of other frequencies.

Morel’s dynamic EQ also fails to achieve its goal of optimizing the listening experience depending on volume, and the lack of hi-res codec support means there’s no way to improve the audio further.

Battery life is also average, and during my tests it failed to live up to its claimed 20 hours, ending up closer to 16. Fast charging is available, though, which means going from empty to full takes just two hours and only 20 minutes to get four hours of playback.

As for price, the Biggie is undeniably costly, and it seems most of your money is going towards the superlative build quality. The lack of features could be forgiven if the sound was truly exceptional, but it fails to deliver on that front too.

If it’s features you’re after, Sonos’s range of speakers, including the Sonos Roam 2 and Sonos Era 100, offer a ton of options and customizations plus wi-fi support, and cost less than the Biggie. If you want a standout sonic performer, the Audio Pro C20 is one of the best in that department.

Morel Biggie close up of handle clasp — (Image credit: Future)

Morel Biggie review: Price & release date

$299 / £299 / $AU499
Multiple colorways
Available worldwide

The Morel Biggie is available now for $299 / £299 / $AU499. It comes in several colorways, ranging from monotones and oak to shades of blue, green, and red. The faux leather strap is either black or brown, depending on the colorway.

It sits towards the higher end of the market, making it more expensive than the Sonos Era 100, our current pick as the best wireless speaker. It is considerably cheaper than the Era 300, though, which is slightly bigger than the Biggie, and features Dolby Atmos support plus multi-room audio using your home wi-fi network, among other technologies.

There are also cheaper alternatives that offer better portability, such as the Sonos Roam 2, our number one pick overall for Bluetooth speakers, and the B&O Beosound A1 Gen 2, which we think is the best for sound quality.

Morel Biggie review: specs

close up of Morel Biggie speaker grill tag — (Image credit: Future)

Morel Biggie review: Features

Bluetooth and 3.5mm AUX playback
Stereo playback possible
No app

In terms of functionality, the Biggie is about as simple as wireless speakers get. There are only five buttons on the Biggie: one for power, two for volume, one for pairing, and one for switching between wired or wireless connections. On the back is a single USB-C port for charging the speaker, which can also be used for charging a phone (although this didn’t work with my Google Pixel 7a). The port doesn’t allow for wired playback, though – there’s a 3.5mm AUX input for that.

There’s also very little in the way of audio enhancements, with no support for Dolby Atmos, Spatial Audio, and hi-res codecs like aptX. It is Auracast compatible, which lets you join audio broadcasts that can potentially reach an unlimited number of playback devices. You can use two units together in stereo, but as I only had one test unit, I couldn’t try this out.

There’s only one way to use the Biggie wirelessly and that’s via Bluetooth. While it paired instantly with a FiiO M11S music player, it struggled to connect to my Pixel 7a. It remained stuck in pairing on the first attempt, and on the second it paired but failed to establish a connection, with the Biggie’s pairing button flashing interminably. After pressing the mode select button twice it connected successfully. Of course, minor glitches like this can occur when pairing devices, but I’ve never had an issue pairing the latest audio devices with my phone before, and it’s a blemish on a speaker of this price.

To check the battery level, you have to hold both volume buttons for two seconds. The lights of all five buttons indicate the battery's remaining charge, making for an imprecise measurement – and since there’s no app, it’s the only option. Again, it’s an oversight on a modern-day premium wireless speaker to have no mobile app of any kind.

close up of Morel Biggie handle — (Image credit: Future)

There are other issues with the battery indicator too. When I tried checking the level on a full charge, all five buttons flashed very quickly and faintly, which seemed like a glitch of some kind. Also, when holding the two volume buttons together they’re obscured, so when the battery is between 21-40% or 10-20% – which is when only the volume buttons will light – you can’t see the readout until you’ve taken your fingers away. Suffice to say, it’s not the most elegant solution – ironic given it’s designed to preserve the Biggie’s minimalist design.

Morel claims the battery will last up to 20 hours, which is reasonable for a wireless speaker. Things didn’t get off to a good start during my tests, though: after only one hour of continuous playback, it dropped to four lights, indicating a level of between 61-80% (I believe it was closer to the latter figure).

However, for the next five and a half hours of playback, it remained at this level before dropping to about 60%, so thankfully the battery’s rate of depletion didn’t follow its initial trajectory. Extrapolating beyond this figure, though, the Biggie still falls short of its purported lifespan: realistically, it’s closer to 16 hours.

Features score: 2/5

rear of Morel Biggie — (Image credit: Future)

Morel Biggie review: Sound quality

Full and rich sound
Excessive boom
No hi-res codec support

Given the compact size of the Biggie, the bass sounds are surprisingly full and powerful, with plenty of punch. Highs are crisp and mids are clear for the most part. What’s most impressive is the sense of space the Biggie imparts, doing an admirable job of rendering the kind of experience you’d expect from a much larger speaker.

However, the Biggie is all too prone to excessive amounts of boom, even with the volume low; the so-called dynamic EQ fails to keep the sound in check at all levels as is claimed, and it’s unable to rein in mild distortion at higher levels. The speaker is definitely best experienced at a distance, but even then, that boominess all too often masks the finer details, especially in classical and other string-heavy music.

It’s also a shame that a speaker aiming for the premium end of the market only supports lossy SBC and ACC codecs, losing out on the higher fidelity offered by LDAC, aptX (which the larger Högtalare supports), and others. Using a wired connection via the 3.5mm AUX input doesn’t improve matters either, sounding near-identical to its wireless counterpart.

The volume controls don’t offer enough increments, with the lowest possible setting still too loud and boomy for more discreet listening. They also frequently clash with the volume controls on playback devices, with one overriding the other. A dedicated app could’ve kept volume levels consistent between speaker and source. It could’ve also offered an adjustable EQ for those who like to dial in their preferred settings.

Sound quality score: 3/5

Morel Biggie review: Design

speaker grill opened on Morel Biggie — (Image credit: Future)

Brilliant build quality
Ultra-minimalist
Weight compromises portability

It’s clear the Biggie is going for the sleek, ultra-minimalist look, with a hint of tradition courtesy of the large faux leather handle – which, together with the strap locks, serves to imitate a pair of headphones, a design choice I have to believe was intentional.

The overall engineering of the Biggie is impeccable, even down to the included USB-C cable. Every edge and fixture is solid and seamless, although the fitting of the back panel in my test model wasn’t quite perfect. Still, it was more than acceptable and barely a cause for complaint.

Every side of the Biggie is completely flat, making it easy to fit anywhere in your home. The four rubber feet are thick and sturdy, keeping the Biggie firmly planted. However, despite Morel claiming it to be a portable speaker, it’s too cumbersome and heavy to take on your travels. Really, this is an indoor speaker meant to be kept in place.

The aforementioned strap can be removed if you want to streamline the Biggie even more, simply by unscrewing the side clamps. There’s an optional wall mount available from Morel, should you wish to declutter your space even more.

The magnetic cloth grill is incredibly slick and, again, feels engineered to the highest standards. A small yet sturdy leather tab can be used to pull the panel off, although it's a little surplus to requirements, more of a style accessory than anything else. The fit and finish of the panel are faultless, and it's an incredibly elegant solution to masking the buttons that sit behind, invisible until the LEDs shine through once powered on.

But despite the quality of the grill, I do worry that the thin cloth will degrade after repeated button presses through it. After only a few days with the Biggie, I began to notice a crease running up the cloth from repeated compressions against the large button panel.

Another issue is that you can’t see the power button when it’s off. Muscle memory will take hold quite quickly, but it’s still a quirky design choice to hide it from view completely and illustrates just how committed Morel is to the Biggie’s minimal aesthetic.

True to the rest of the speaker, the Biggie’s buttons are solid yet light to the touch, with a pleasing clack to the presses. Their fit isn’t quite as perfect as other aspects of the Biggie’s overall construction, but I’m nitpicking here; they’re certainly up to the standards you would expect from a speaker of this price.

Design score: 3.5/5

Morel Biggie review: Value

At $299 / £299 / AU$499, there’s no denying the Biggie is an expensive wireless speaker. It’s more expensive than the Sonos Era 100, our number one pick for the best wireless speaker, which has more features and the brand’s unique ability to create a network of speakers for a complete home setup.

If you’re looking for a more portable experience, then our current pick for the best Bluetooth speaker, the Sonos Roam 2, is cheaper than the Biggie and fits in your luggage nicely thanks to its pill-like shape. It also has an IP67 waterproof rating, making it ideal for travel. Overall, it’s a more versatile performer than the Biggie.

Other similarly premium speakers include the Bose SoundLink Max, which is sturdy and portable but $100 more than the Biggie. Being a hardy, go-anywhere speaker, though, it’s also got an IP67 rating, and a battery life that actually lasts the 20 hours it claims, according to our tests.

Should I buy the Morel Biggie?

Morel Biggie with speaker grill removed — (Image credit: Future)

Buy it if...

You adore minimalism
If you want zero fuss in your speaker, then look no further than the Biggie. It’s as clean as they come and fits in virtually any space in any home.

You want a sense of space
For such a small unit, the Biggie impresses with its all-encompassing soundscapes. The low-end response is also powerful.

Don't buy it if...

You want the best sound
The Biggie gets boomy all too easily, and the lack of any hi-res codec support is a real shame on a speaker this premium.

You want plenty of features
There are no extras on the Biggie: you get Bluetooth and wired playback, and a few buttons for control. There’s no app or settings to adjust.

You want portability
Despite what Morel says, you’ll struggle to carry the Biggie around comfortably. There are plenty of Bluetooth speakers out there that are much better suited for this purpose.

Morel Biggie review: Also consider

Sonos Era 100
The Sonos Era 100 is at the top of our wireless speaker list for a reason – and that is stellar sound that’s improved even over its sibling, the Sonos One, including better bass tones and a wider broadcast for optimal listening across a larger area. It also undercuts the Biggie on price.
Find out more in our Sonos Era 100 review

Tribit Stormbox Micro 2
If you’re after something more budget-friendly, the Tribit is one of the best Bluetooth speakers around. The sound quality belies its tiny size and it comes packed with features, including a power bank function, a built-in strap that can fit on your bike, and a microphone.
Read our full Tribit Stormbox Micro 2 review

How I tested the Morel Biggie

I tested the Morel Biggie for about a week and tried it with a variety of playback sources, including my phone, a laptop and a music player. I tested both its Bluetooth and wired capabilities.

I mainly listened to music via Tidal, a streaming service that allows for hi-res playback, although this wasn’t applicable in the Biggie’s case, reverting to the SBC/ AAC formats instead. I used TechRadar’s specialized playlist, designed to put audio devices through their paces with a comprehensive mix of genres and sonic styles, ranging from pop and electronic dance, to jazz and classical across multiple eras.

I tested the battery by letting the Biggie run continuously for six hours and took readings about every hour. Since there’s no volume readout, I can’t say exactly what levels I had set but suffice to say, I would describe my sessions as being comfortably loud.

First reviewed: September 2024

Anker Soundcore Space One Pro review: affordable, superb-sounding wireless headphones crammed with features

12:52 pm |

Author: admin | Category: Audio Computers Gadgets Headphones Wireless Headphones | Tags: Australia | Comments: Off

Anker Soundcore Space One Pro: Two-minute review

The Anker Soundcore Space One Pro are the most expensive headphones Anker has ever released. Sure, they're still a lot cheaper than the likes of the Sony WH-1000XM5, but it does pile on a bit of pressure for these headphones to deliver, especially considering top-rated headphones like the Sennheiser Accentum Plus come in at nearly the same price. Happily, though, the Anker Soundcore Space One Pro are a great-sounding pair of wireless headphones that kept me listening for hours on end, day in, day out.

Thanks to LDAC codec compatibility, you’re getting hi-res audio, which helps the Soundcore Space One Pro to deliver rich, well-weighted all-round sound. If you appreciate some depth, these will likely pique your interest, thanks to the impressively weighty bass and sub-bass on offer. More generally, audio is to a high standard – it's not always as sharp as it could be or as clean-sounding as some top-of-the-range headphones, but it'll satisfy the vast majority of listeners.

Thanks to the Soundcore app, you can also find the perfect sound for you. There are classic EQ settings, which include a huge array of presets and a custom option too. But what’s really exciting is the HearID setting which assesses your personal tastes and hearing capabilities to suggest the perfect calibration – something that even some of the best headphones don’t offer. Not only that, but there’s a Dolby Audio mode available for those looking for a more expansive soundstage when watching movies or TV shows on the go.

More broadly, you’re getting a strong feature-set here. There’s Easy Chat for having conversations without needing to pause your tunes, multi-point connectivity and adjustable active noise cancellation settings. Speaking of ANC, you’re getting cancellation that’s a cut above some of the best cheap headphones. Some high-pitched sounds will still creep through, even when listening at higher volumes, but overall, you’re not going to get too distracted by the outside world when using the Space One Pro.

You’ll also be able to listen pretty much unbroken thanks to two key factors: battery life and comfort. Firstly, you’re getting plenty of playtime with the Space One Pro, which can go for 40 hours with ANC on and 60 hours with ANC off – although beware, with hi-res audio switched on, this number will be significantly cut. In terms of comfort, it really doesn’t get much better. Wearing the Space One Pro is never grating, even after listening for multiple hours consecutively – a fantastic plus given a lot of over-ear headphones fall at this hurdle.

It’s not all sunshine and rainbows, though. One of the Space One Pro’s biggest flaws for me is their looks. Although when folded they’re ultra-compact, in use they appear chunky and a little bit disappointing quality-wise – especially the button controls. This might not be a deal breaker for many, but Soundcore has increased its asking price for these headphones. Don’t get me wrong, these are good quality cans, but with this amount of cash, there are some outstanding alternatives from the likes of Sony and Sennheiser available to you – are the Space One Pro better than these? I’m not too sure.

Still, they sound great and you’ll happily keep playing your favorite tracks for hours on end. The main issue is the strength of the competition. For example, in our Sennheiser Accentum Plus review, we gave these similarly priced headphones 4.5 stars, thanks to their impeccable sound quality – although their fit isn’t suited to every head. Some people may find the Soundcore more comfortable, and prefer them for that reason, but most people will probably want to go for the better sound quality.

Anker Soundcore Space One Pro review: Price & release date

$199.99 / £149.99 (about AU$300)
Launched on September 5 2024 in UK/US
Launching in Australia in October 2024

With the Anker Soundcore Space One Pro headphones, the brand has ventured into slightly more premium territory. These cans will set you back $199.99 / £149.99 (about AU$300) – that puts them in the same ballpark as the Sennheiser Accentum Plus, which retail for $‌179.95 / £169.99 / AU$299, and the Sony ULT Wear, which go for $199.99 / £149 / AU$348.

It’s a significant price jump on the classic Soundcore Space One, which were just $99 / £99 at launch. Of course, the newer model is more compact, has more mics and higher-quality audio, but that’s still a big jump considering the Space One still has ANC, a very similar battery life and hi-res audio capabilities.

The headband of the Anker Soundcore Space One Pro resting on a concrete pillar in front of a pink wall — (Image credit: Future)

Anker Soundcore Space One Pro review: Specs

A closeup of the earcups of the Anker Soundcore Space One Pro resting on a marble surface — (Image credit: Future)

Anker Soundcore Space One Pro review: Features

Solid active noise cancellation
Hi-res audio capability
Feature-rich companion app

Something I love about the Space One Pro is that they boast a pretty expansive feature-set. You get the classic options you’d expect from modern wireless headphones, including multi-point connectivity and EQ settings, but there’s a good amount more to uncover.

One of my favorite features was Easy Chat, which lowers the music volume playing and makes voices clearer. This was incredibly useful in an office setting, especially when I had to respond to questions or chat with colleagues briefly, making for a seamless transition from listening to talking. You can easily adjust the time it takes for music to fade back in after using Easy Chat in the Soundcore app, with 5, 10 and 15 second wait times available, although I found the default 5 was ideal. Sensitivity here was just right too; for instance, the sound of typing wouldn’t set off Easy Chat, making for a near-flawless user experience. You will have to resist singing along to the music, though…

Another neat little feature is Safe Volume. When I listen to music, I like to listen at loud volumes – maybe a bit too loud sometimes. However, the Soundcore app has a decibel reading meter that displays whether your volume level is normal, acceptable (ie, a bit on the loud side but probably okay), or too high. This is useful for keeping yourself in check, and you can set a high volume limit too, if you want to be on the cautious side, or to keep kids' hearing safe if you give the headphones to them.

As I mentioned, there are classic EQ settings here, including a bunch of neat presets for various genres and the option to make a totally custom sound. However, one of the coolest settings available is HearID Sound, which assesses your hearing capabilities at various frequencies and asks you to pick your preferred sound through a small handful of multi-choice questions to find your perfect sound. This worked fantastically well and gave me some added depth in the bass department, a little bit of additional height in the treble, with a dip in the mid-range – a calibration that suited my taste very nicely.

One more feature that enables you to customize sound is Dolby Audio. This is useful if you want a more immersive, expansive sound from your headphones, but is likely better suited towards people watching videos. I found that this did add a bit of width to the soundstage, but I rarely used it when listening to tunes. When you are blasting your favorite songs, though, you can activate the LDAC audio codec (compatible with most Android phones), which delivers richer, more detailed hi-res audio – something I kept turned on throughout most of the testing process.

The earcups Anker Soundcore Space One Pro resting on a concrete pillar in front of a pink wall — (Image credit: Future)

Another part of the Space One Pro that’s decently customizable is ANC. You can toggle on Wind Noise Reduction when out and about and switch between full, normal, and transparent levels of noise cancellation. But how is the ANC itself? Pretty good actually.

In a café, I could still hear a conversation on my table with music at half volume, but at a more realistic listening level of 65-70%, I could barely hear any words at all. When listening to more mellow classical music, however, sounds like plates being placed down crept through sometimes, even at high volumes.

At around 60% with Wind Noise Reduction on, traffic was barely audible, although some higher pitched noises did seep through from time to time. Similarly, when using a hairdryer, the screech-like noise it emitted was still audible when listening to a bass-heavy track.

With the lower-frequency tones of a microwave, I heard almost nothing at 50-55% volume, although this didn’t surprise me a lot as the Space One Pro seemed to be very competent at blocking out lower-frequency sounds, as is common with the best noise cancelling headphones.

I compared this to the more budget 1More Sonoflow and Sony WH-CH720N in the same environments, and the Space One Pro were a clear upgrade over them both.

To top everything off, the Space One Pro have a very respectable battery life of 40 hours with ANC on and 60 hours with ANC off. This is, of course, reduced if you’re using hi-res audio. When testing battery life with ANC on, I found the 40-hour claim to be accurate.

Sure, there are some headphones out there, such as the Cambridge Audio Melomania P100, that can go for up to 60 hours with ANC on, but they’re about $80 / £80 more expensive. And this battery life is 10 hours longer with ANC on (and 20 hours with ANC off) than the considerably pricier Sony WH-1000XM5. So, all in all, it's fair to say the Space One Pro are a top choice if longevity matters a lot to you.

Features score: 4.5/5

A closeup of a man wearing the Anker Soundcore Space One Pro in front of a pink wall — (Image credit: Future)

Anker Soundcore Space One Pro review: Sound quality

Full-sounding hi-res audio
Satisfying bass
Audio isn’t perfectly sharp

Overall, we were pretty positive about the original Anker Soundcore Space One’s audio, particularly because of its ability to offer strong bass, clear vocals and LDAC support. Thankfully, all of this holds true for the Pro model, which more generally delivers great audio quality.

Let’s start with bass: if like me you’re someone that appreciates lots of depth, these are gonna hit the spot. Sub-bass in Backseat Freestyle by Kendrick Lamar was perfectly weighted, never feeling overly dominant in the mix – a lot of cheaper headphones struggle to handle this level of depth, but not the Space One Pro. When listening to Black Eye by Allie X, the dynamism of the bass connecting up to the mid-range was impressive too, although the kick of the drum machine was slightly lethargic.

Mid-range sounds come through clearly and with solid levels of detail. When comparing these to the cheaper Sony WH-CH720N, the Space One Pro achieved a fuller sound, helping to expose a few more sonic intricacies. This is, of course, helped further if you activate the LDAC codec for hi-res audio.

Like the ‘non-Pro’ edition, these produce a pleasingly wide soundstage experience, which is ideal for atmospheric tracks like Rains again by Solji. This track sounded a little bit constrained with the CH720N, but when using the Space One Pro, the intro’s rain sound effects were natural and quieter vocal segments were more controlled. The soft vocals maintained their intended levels of delicacy too and highs often sounded sweet when using these headphones. From time to time, vocals could be a little harsh at top volumes, something I discovered when listening to the opening of SICKO MODE by Travis Scott, but this wasn’t too common.

All in all, I found the Anker Soundcore Space One Pro to be very good in the audio department. They’re not going to deliver the incredible accuracy, intricate detail and flawlessly clean audio that super-premium competitors can offer, but for some headphones below the $200 / £150 / AU$300 mark they perform well. Bass is the star of the show here, but there’s excellent customizability if you’re more of an avid podcast fan looking for an emphasis on clear vocals, for example.

Sound quality score: 4/5

The folded up Anker Soundcore Space One Pro resting on a marble surface — (Image credit: Future)

Anker Soundcore Space One Pro review: Design

Ultra-compact foldable design
May be a little chunky looking for some
Super comfortable fit

When I first unboxed the Anker Soundcore Space One Pro, I got more of an earmuff than headphone vibe. Initially, I was struck by how chunky they were – even the headband is pretty thick and padded. Don’t get me wrong: the Space One Pro aren’t horrible looking, but I don’t think there’s gonna be a rush to hang them in the Louvre.

Even in terms of build quality, I wasn’t massively impressed. That’s mainly because the buttons and silver detail on the headphones look and feel a bit cheap. I did, however, quite like the Cream White color that these cans came in, though a Jet Black alternative is also available.

It’s not all about the looks, of course, and thankfully these headphones are incredibly comfortable. Every day I’ve tested the Space One Pro, I’ve used them for at least five hours and have not once felt a smidge of discomfort, so if coziness is the number one thing for you, these are absolutely perfect.

Another smart aspect of these headphones is their compact nature. Thanks to what Anker calls a FlexiCurve Structure, these can halve in size when fully folded, perfect if you’re a bit limited for space in your backpack or tote bag.

A case is available for them (added free for initial order, but that may not be the case if you buy in the future) that's also waterproof, unlike the headphones themselves, which don’t have a dust or waterproof rating.

Something these do lack is touch controls – which may be pleasing to some, but I would’ve personally appreciated them. Instead, you’re stuck with plain old button controls and unfortunately they’re a bit lacking. I already mentioned they’re not the prettiest, but I also found the volume controls to be quite unresponsive and I had to hold down the power button for quite a while to switch the headphones on or off. You can customize which button controls do a little bit in the Soundcore app, but options are pretty limited.

Overall, I don’t love the Space One Pro’s button controls and I’m not an enthusiast when it comes to their looks either. However, what I can’t deny is that they’re massively comfortable and super-compact, making them totally user-friendly. Fashionistas – you’re probably best served elsewhere I’m afraid, but otherwise I’d urge you not to rule these out on looks alone.

Design score: 3.5/5

The earpads and headband of the Anker Soundcore Space One Pro in front of a pink wall — (Image credit: Future)

Anker Soundcore Space One Pro review: Value

Anker’s most expensive headphones ever
Stack up to similarly-priced competitors on features and sound
Still a tad too costly at launch

I’ll be real, reader, I’m conflicted here. I’ve really enjoyed my time with the Anker Soundcore Space One Pro; they’re a great-sounding, ultra-comfortable pair of wireless headphones that have kept me listening for hours on end. But there’s a massive amount of competition in this price range from some of the most well-respected tech companies in the game.

For example, the aforementioned Sennheiser Accentum Plus offer confident, punchy sound, a longer battery life and a more attractive design for a similar price. And the Sony ULT Wear are also super comfortable and offer the LDAC codec – although in our Sony ULT Wear review we had a mixed response to its bass-boosting ULT button. Good options abound at this price point, making any one choice harder to justify.

And there are often bargains available on more premium options: for instance, the legendary Sony WH-1000XM4 are regularly available at a similar price to these these headphones, and they are going to offer almost everything you get here, but with even better audio and a classic design. However, it is worth noting that this only applies to when the Sonys have their price cut, and the Space One Pro will inevitably also see strong discounts, probably as soon as Black Friday, shortly after launch.

What I’m more confident in stating, though, is that these outperform the stronger budget wireless headphones, such as the Sony WH-CH720N and 1More Sonoflow, both of which we’ve spoken about highly on numerous occasions. These have considerably better ANC, audio quality and features. So, although I wouldn’t expect these to be listed at a way lower price, I think these will be extremely attractive on sale, when they’re closer to the $150 / £120 mark.

Value score: 3.5/5

A man putting on the Anker Soundcore Space One Pro in front of a pink wall — (Image credit: Future)

Should I buy the Anker Soundcore Space One Pro?

Buy them if…

Comfort is a priority for you
A lot of over-ear headphones tend to get uncomfortable after a while, but not these. The Anker Soundcore Space One Pro are a delight to wear, even for hours on end, thanks to their soft ear cushions and well-padded headband. Say goodbye to headphone fatigue, and hello to hours of back-to-back bangers.

You want highly customizable audio
If you have specific tastes when it comes to audio, these headphones are a good pick. That’s mainly because of the HearID feature, which provides a custom EQ configuration suited to your ears. There’s also Dolby Audio for a more expansive sound and LDAC compatibility for hi-res output.

Don’t buy them if…

You’re on a budget
These aren’t ultra-premium headphones or anything, but they’re not the most affordable cans out there either. If you’re on a budget there are so many fantastic cheap options out there for under $100 / £100 / AU$200, check out our guide to the best cheap headphones for some recommendations.

Style is your main concern
Everyone’s entitled to their own opinion, but I think many will agree with me here – the Space One Pro aren’t the most attractive cans out there. If you want some sleeker headphones, the likes of Sony and Bose have plenty of excellent options that avoid the chunky look that Anker has adopted here.

The earcups of the Anker Soundcore Space One Pro resting on a concrete pillar in front of a pink wall — (Image credit: Future)

Anker Soundcore Space One Pro review: Also consider

Sennheiser Accentum Plus
The Sennheiser Accentum Plus are a fantastic pair of mid-range over-ear headphones. They offer beautiful sound quality, a clean design, decent ANC and an epic battery life. And once you factor in their price, which is scarcely any higher than the Space One Pro, they become a very attractive option indeed – as you can see from the fact we granted them 4.5 stars in our Sennheiser Accentum Plus review.

Sony WH-CH720N
I’ve owned these headphones myself for about one year and can say they’re very good if you want a cheaper option than the Space One Pro. Sure, they don’t support LDAC or produce a super-expansive audio overall, but you still get a nicely balanced sound with solid detail. Not only that, but they have awesome battery life, 360 Reality Audio support, competent ANC and a lightweight design. Given they’ve gone on sale for less than $90 / £80 in the past, they’re an incredible option if you’re working with a tighter budget. Read our full Sony WH-CH720N review.

Anker Soundcore Space One Pro review: How I tested

Tested for one week
Used in the office, in a café and while on walks
Predominantly tested using Tidal on Samsung Galaxy Z Flip 4

I tested the Anker Soundcore Space One Pro over the course of a week. During this time, I took to a number of environments including a café, built-up roads, the office and my apartment. I typically connected the headphones to Tidal on my Samsung Galaxy Z Flip 4 with the LDAC codec active in order to access the best quality audio. I also tested the headphones with the FiiO M11S hi-res music player, my Windows laptop, and an iPhone 13 Pro. When listening to music, I went through the TechRadar testing playlist, which includes tracks from a number of genres, before expanding to a wider music selection. When appropriate, I also compared the Soundcore Space One Pro directly to the Sony WH-CH720N and 1More Sonoflow.

First reviewed: September 2024
Read more about how we test

« Previous Page — Next Page »